Yearly Archives: 2020

The medieval market village gets a fresh new look

If you’ve been a LEGO fan throughout childhood, this situation might be familiar to you: spending hours staring at a set you’ve always wanted in the catalog, obsessing over it until you’d memorized every detail in that set, down to every last brick. For me, that set was the 10193 Medieval Market Village, with the hinge-open village houses and waterwheel powered blacksmith hammer. It was a beauty back then and it still does in this recent Medieval Market Village redux by Robert Maier, aka hellboy.bricks. Drawing inspiration from all the original set’s essential features, this revamp uses more complex techniques yet still holds all the character and charm of the original Medieval Market. The brick-built tree branches have been substituted with Technic connectors, a pumpkin patch has been added in the back, and macaroni tiles now adorn the blacksmith shop’s archways. The classic brick slope roofing on both buildings has also been swapped out with a cheese slope roof for the blacksmith shop and a curved tile roof for the medium blue house. Also, the olive green looks gorgeous on the newly paved cobblestone, a color that you wouldn’t have found in this 2009 set.

Missing the good ol’ days of the Castle theme? Robert has made another set redux (hint: there’s goats) that you can check out here.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Nightmarish creature will stomp on you

In case you ever wondered what would result if a scorpion and a spider got freaky and produced something even freakier, wonder no more. This nightmarish creation by Ivan Martynov reveals the result. While the legs might look a bit spindly, make no mistake, this creature is not to be trifled with.

Spider of Leng

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The distinctive markings of British emergency vehicles

A lot of young boys want to become policemen, firefighters, or paramedics when they grow up. I, too, was fascinated by emergency vehicles. There was something about their bright markings, flashing lights, and sirens. As an adult, I realise that the work done by emergency services can be far from glamorous, but emergency vehicles do make for fun and attractive LEGO models. So, I have built models of vehicles from Tokyo, New York and the Netherlands. For years I’ve also had a collection of vehicles from the UK. In the last few weeks, I had a go at building a few newer ones to replace models of vehicles that are no longer in service. They are a long-wheelbase Ford Transit van, as used by the London metropolitan police, and a Mercedes Sprinter ambulance used by the London ambulance service.

For most builders, myself included, painting LEGO is not an option. I do use stickers, but I build most of the color scheme into the model. Because of this, it can become integral to the model’s construction, and I very much enjoy figuring out how to include a particular pattern. Given their colorful liveries, this applies to models of emergency vehicles in particular. Nowadays, most British emergency vehicles use a distinctive checkered pattern, known as “battenberg” markings, after battenberg cake. On the ambulance, I built its blocks using green and lime green parts. This was not easy. The vertical boundaries between them have to line up with features of the vehicle. Furthermore, the blocks on the side of the van body all have the same length. Due to the scale of my model, I couldn’t recreate them using the straightforward studs-up building. So, I had to get creative. I ended up building most of the blocks sideways, to make them just a plate narrower.

The London metropolitan police switched to yellow and blue battenberg markings in 2012. Older vehicles still use a livery called a “jam sandwich” though. This, too is very distinctive: it’s a gold-colored stripe with orange and blue stripes above and below it. This was a lot easier to build. Frustratingly though, I did have to contend with variations in the gold color of the various elements, including multiples that came from the same set.

A high-visibility pattern of yellow and orange chevrons covers (part of) the rear of both vehicles. As I did with most of the lettering, using stickers for those would have given me a cleaner look. However, I do like the LEGO-like look I get by building them using bricks and plates. My vehicles are unmistakably LEGO models. Yet, almost anybody who knows what the real ones look like will recognise them.

I can’t imagine that Transit vans like mine will remain in service for much longer, but that is just the excuse I will need to build a newer vehicle in a couple of years’ time.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Cruisin’ cyberpunk style

Ever wonder what the Batmobile crossed with a DeLorean would look like? I think Jerry gives us a good idea of what that thought experiment would physically yield with his LEGO cyberpunk vehicle build.

The back of this car is what really gives me the DeLorean vibes with its boxy, beefed up rear. I enjoy Jerry’s use of the red 1×2 grille pieces for backlights — this color choice really pops against the black and grey color scheme, yet also compliments the yellow that’s accented briefly throughout the work.

Jerry also utilizes different rims for the front wheels versus the back wheels which is a bit of a visual trip from the norm. Overall the work can be construed as a fusion of multiple fantasies as well as a good mix of parts from different vehicles in the LEGO Speed Champions line and perhaps some other themes, who doesn’t like a good mashup?

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A Greek Villa al la Bygglek – Courtesy of Ikea

Warm, white, and rectilinear – this can describe a couple things; BYGGLEK boxes produced from the new LEGO-IKEA collab or a Greek Villa on a sunny day in Greece. Jannis Mavrostomos combines both notions into one and creates an epic LEGO house for all to enjoy while yearning for Mediterranean weather.

The backbone of Mavrostomos’s structure consists of two BYGGLEK boxes – what seems to be the small and large boxes combined. The second floor porch is nicely tiled with sand and dark tan colored tile elements of various sizes. There is a lot of great parts usage in this work, one of my favorites being the blue hinged sliding doors on the elevated porch being used as a small shade. The notches of the boxes are utilized heavily with intricate windows being built into them as well as a whole staircase. No house is complete without some plant-life, and Mavrostomos has that area covered – literally by using green tree-limb elements decorated with flowers to serve as candid vines climbing along the corner of the villa. Mavrostomos also adds potted plants to liven up the place. Overall this build is unique because it showcases cultural architecture which is subject matter not often explored in LEGO, it is quite refreshing to see something like this pop into my Instagram feed.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Harry holds on for dear life

We’ve all seen plenty of LEGO models showing minifig-scale scenes from the Harry Potter books and movies, so it was quite surprising to see Joffre Bricks come up with a wonderfully whimsical take on the flying car scene from Harry Potter and the Chamber of Secrets. Using just a few simple plates with clips for the arms, and a very blocky style for the car takes nothing away from this delightful depiction. And while the round white plates with a center hole may be perfect for Ron’s bulging eyes, Harry’s giant terror-filled eyes are pure genius.

Hold on Harry!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO Artception

One thing that LEGO and art have in common is that they are both highly sought after by collectors. The major difference between Banksy and LEGO is that LEGO is collectible whereas Banksy’s oeuvre is impossible to collect (on purpose of course). That being said, with LEGO anything is possible — even the recreation of a Banksy, as Tina and Chris have done here in this wonderful build.

The builders seem to heavily rely on the SNOT (studs not on top) technique to achieve the form of this build. No specialized elements are utilized here; looks like mostly bricks, small plates and tiles compose the piece.

The subject of the build is what is most alluring, especially since Tina and Chris have constructed a version of the artwork hilariously “self-destructing”. While nobody can really become a Banksy collector at least the concepts of his work can live on through other media.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Radagast the Brown

Radagast the Brown has to be one of my favorite characters from the Hobbit trilogy. He is a bit not all there, loves nature and animals. Most of all, he has his heart above his head. Radagast also is the main subject in ekjohnson1‘s latest creation. Although he can’t take credit for the figure itself, LEGO did a splendid job on this one; the lovely little cottage he lives in is entirely ekjohnsons’ own creation. The cottage was once just a little house in the woods, but then Radagast dropped a little acorn right in the middle of some dirt on his home floor. A small tree sprouted. Radagast, not having the heart to tear it up, just let it grow because he doesn’t destroy things. Eventually, the little sprout turned into a big tree, splitting the house apart. The lighting is just spot on. But what really sets the scene is the brilliant part usage. The thatched roof is made out of quite a lot of bladed claws. And there are trunk tails used as tree roots and branches everywhere.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Behold the Blacktron Dreadnought!

Excerpt from Captain Nathan Proudlove‘s Log, M-Tron Freighter Miranda: “It was supposed to be a routine trip. Get the cargo, haul it to the destination, and go back home. But instead of cargo, the drop point consisted of this… thing. It was huge, like a long black dart bristling with death. We tried to reverse course and fired a warning shot at the Blacktron warship, only to realize it was in vain. Each of the three weapons bays on the warship opened to reveal gigasonic missiles, launched and reaching out to us like claws of an otherworldly deity. The bridge crew and I launched the escape pods and fled before it could catch us, but all other hands were lost…”

Neo-Blacktron Rocket SHIP

This behemoth is none other than a Neo-Blacktron Rocket Ship. It leaves a lot to the imagination, which is exactly what you want when building massive space ships. I love the detail here, such as the engine nacelles coming out of the wings’ front and back, and the sensor work at the rocket’s top. The three labeled doors on the side make me imagine that those are either weapon ports or docking bays, or both. The best part by far is the Blacktron logo embedded into the ship, stating the ship’s evil allegiance to the bad guys of LEGO space.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Shine on you crazy diamond (store)

The Enchanted Diamond by Maxim Baybakov is a LEGO ode to “studs not on top” construction. The entire front façade is based on a very clever inversion of arch bricks with lovely insets of 2×2 turntable bases. I’m also fond of the column that flank the lower windows. The unusual texture there is thanks to Technic gearshift connectors. The roof has a great technique as well, with layers of dark blue 2×2 and diagonal tiles forming an intricate pattern. The end result is very upscale, as befits a high-end shop.

Enchanted diamond

Maxim also creates a nice little story with the minifigures – it looks like someone is busy casing the joint. It might be easier to just follow along behind the other folks and pick up their costly litter…

Enchanted diamond 1

Maxim is well on the way to building the perfect downtown district. The Enchanted Diamond would look great nestled between the barber shop and bookshop.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Mad Max’s V8 Interceptor rides again

This sweet ride by Michael Kanemoto is looking mean in a way only classic muscle cars can. The black beast is a LEGO Technic scale recreation of Mad Max’s 1973 Ford Falcon, which is of course heavily modified and redubbed the V8 Interceptor. It appears here as it did in 1982’s Mad Max 2: Road Warrior, with massive fuel tanks mounted in back.

V8 Interceptor

Click to see more of the V8 Interceptor

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Metamorphosis Falcon

In the movie Solo: A Star Wars Story, the Millennium Falcon lands on a coast, somewhere on the planet Savareen. The view of the ocean behind the Falcon is a brief, peaceful rest stop for the weary yet indomitable ship. While its stay is temporary in the 2018 film, we now have new vision of the Millennium Falcon as a house. Lmcpicture‘s creation makes the most recognizable parts of the Millennium Falcon livable. The starboard side airlock serves as the entrance, which leads either to a bedroom or a back deck. The blue 1×4 tiles are visual references to the beaming blasts on the original ship’s rear drive units.

Millennium falcon house

Read on to see the interior of this tastefully appointed spaceship

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.