Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

Efforts continue in cataloging the mechanical tree of life

The fantastic mechanical creatures of Mitsuru Nikaido have long fascinated me. As I was emerging from the dark ages of my LEGO obsession, the robotic structures of Mitsuru’s models opened my eyes to just what was possible within the LEGO system. While each creature is a dead ringer for their biological inspirations, they also stand separately from them. Their form and selective color-blocking create eye-catching robotic designs. Mitsuru mostly sticks to a light or dark bluish grey contrasting with white and a pop of bright light orange. This simple palette gives a builder plenty of parts to play with though and Mitsuru certainly takes advantage of his options. Let’s take a moment to check out his latest models of a Water bear and a Snail.

LEGO Mecha Water Bear_01

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Fighting Relics from the Republic

Even after the fall of the Republic, remnants of that bygone era continued to exist in the service of the Empire. LEGO builder Malen Garek shows one example of this with the Venator-class Star Destroyer.
Venator Star Destroyer Indomitable

The first word that comes to mind when I look at this Star Wars capital ship is smooth. There are relatively few brick studs on the hull, helping me see the armor plating that I would expect to see on an Imperial warship. I’m thrilled to see all of the angles on this Venator look exactly like we see in Revenge of the Sith. So many LEGO models of the Venator try but fail to get the angles just right (looking at you, LEGO set 8039). Malen managed to pull it off while building it on a super cool base. Is it lava on Mustafar? Is it molten slag from an orbital bombardment? Regardless, it looks incredible.

Venator Star Destroyer Indomitable

But wait, there’s more! The engines on the Venator can be tricky to make, but again here’s another success for Malen. The use of hinge plates to build the cowling around the engine was a great choice. Additionally, Malen chose to add the smaller engines that are often forgotten in other Venator models.

Skirmish over Imdaar

Speaking of other models, Malen used his Venator alongside creations from other LEGO builders, including an Imperial light frigate and a couple of V-wing starfighters, all of which are attacking a Rebel starship. I think the winner of this battle is clear: the Venator lives on!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This is what it sounds like when doves cry

Prince is, of course, a music legend who left us too soon. However, he’s also notable for totally nailing his passport photo. I mean, DAMN! How can he look that good? Who doesn’t resemble a crazed maniac in their passport photos? Speaking of crazed maniacs, Paul Hetherington is one of the most talented LEGO artists we know. On the stage of his newest creation, we have the inimitable Prince and the Revolution, but flanking them are Majesty and Divinity, Prince’s beloved doves. This piece also includes Prince’s signature purple piano, firepole, and bathtub.

LEGO Prince and the Revolution

A closer look at the band members and we see a striking resemblance to Wendy and Lisa, Doctor Fink, BobbyZ, and Brownmark, all of which were carefully crafted from existing LEGO minifigure parts. If you’re looking at Prince and thinking whoa, hang on there Sonny Jim, what is going on here? Well, he is a custom-made figure by Citizen Brick and features Crazy Arms made by Crazy Bricks. Us LEGO people get by with a little help from our friends which, I’m aware, is completely the wrong band and song reference.

LEGO Prince and the Revolution

If you’re loving this and are totally jonesing for all things Paul, then we got you covered. If, by chance, you want to know what it sounds like when a TBB writer cries, then remind me to show you my passport photo. Oy, what was I thinking with that face? Like a burst sofa!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Refuel, restock, reconnoitre

This vignette by Red Spacecat shows off his latest build, an unmanned combat aerial vehicle. The RQ-190 is being refueled by her crew and prepped for her next mission. This super smooth drone is actually a redesign of a remote-control plane concept that Red Spacecat recently shared. Switching the color scheme of the RC plane to all black just so happens to make the butterfly-inspired design look very similar to a military stealth drone. The angles of the wings hug tight to the curves of the main body and the snub nose lets us see the landing gear peaking out underneath. The slopes and tiles used on the wings make for a smooth, immersive model overall.

RQ-190 Nightwing UCAV

The little builds for the tool chest, bomb cart, and fire extinguisher (I assume) are great details for this vignette. The gears used on the ends of the bombs are clever and, though it might not be exactly “legal,” the cut hose used on the tip of the fire extinguisher is a perfect addition. Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Smaug the Tremendous taking down Lake-town

To this day it still baffles me that they managed to make three movies out of the book The Hobbit. It’s not a complaint, I do love the movies, but it’s just strange to me. Especially since the book is about a third the length of The Lord of the Rings, which also is three movies long. But let’s not get into that for now. Jaap Bijl drew inspiration from the movie The Hobbit for their latest LEGO creation.

Attack on Laketown

Here we see the dragon Smaug setting flame to Lake-town. The atmosphere Jaap managed to create is amazing. Smaug itself is a miniature and the fire he is breathing is done simple yet really effective with bricks, plates and tiles transitioning from yellow to red. Smaug being dark red makes him feel and look like he is part of the fire he is creating. But what’s interesting is that not a single fire piece was used in this creation, and yet it still looks and feels very much on fire. One thing that also contributes to this great model is the backdrop, which to me hardly even looks like it is edited in. Framing the main scene with a dark brick build archway is a really nice and effective way to set the mood and draw your attention to the center of the picture. However, if you zoom in on the arch you’ll find lots of hidden details in the darkness. Last but not least I would like to note the use of round quarter tile to create those great rooftop shingles.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO Harry Potter unveils 3,000-piece 76391 Hogwarts Icons Collectors’ Edition set [News]

Today LEGO unveils the next ultimate exclusive Harry Potter set, 76391 Hogwarts Icons Collectors’ Edition. Designed to celebrate the theme’s 20th anniversary, the new Hogwarts Icons is a 3,010-piece collection of the saga’s major symbols. The set will be available from September 2, 2021, from LEGO Stores and www.lego.com/harrypotter for US $249.99 | UK £249.99

Click here to take a closer look at the set…

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A not-quite fortress of solitude

Sometimes we all need a quiet place to rest and recharge from our hectic lives. LEGO builder Louis of Nutwood has imagined and built just such a place. With a cottage by the river and a nearby windmill to help with the chores, I can’t think of a better place to lay down under a tree and read a good book until you drift off to dreamland. Smoke billowing gently from the chimney is a sure sign of a warm hearth, maybe some freshly baked rolls, or a tasty pie are waiting for you. The detailed rock work and the outward-facing transparent tiles and plates round out this lovely little scene.

Quietude

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The Battle of Drumstick Glade

As you know over at The Brothers Brick, we love a good brick build insect. And this LEGO creation by Ted Andes features a lot of them! The ants are completely brick build. They are made out of droid arms, clip claws, t-bars, and bricks with studs on 4 sides. They even have a small gaster made out of tooth plates. We are currently watching a battle between the Blackthorns and the Lavender Leaf ant clans. My bet is the Blackthorns are the black ants and the grey ants are the Lavender Leafs. They are fighting over a half-eaten pheasant leg on the ground. I’ve seen a lot of uses for the curved tapered panel but I’ve never seen it used as a pheasant leg. For the foliage, it looks like Ted dismembered a bunch of LEGO flower bouquets. Which seems like a good cause in this case.

"The Battle of Drumstick Glade"

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Dis is the way.

I know it’s not what Jarek Książczyk intended, but the “Countess of Dis” sounds like a character from Lovecraftian reboot of Sesame Street. “One! Two! Three! Three elder gods! Ha ha ha!” Just don’t cross her even more sinister cousin, the Countess of Dat. But questionable mythology aside, you should take a moment and appreciate the amazing build here. I’m particularly impressed with the way the three main colors unify the build. The dragon wing along the figure’s back has just a touch of red in the dual-molded plastic, echoed in the cloth cape and the banners on the staff. The gold finials on the staff complement the chest armor and skirting, with great part usage like that carriage wheel front and center, and the weapon in the bodice. The black organic curves draw the eye and are matched by the folds in the skirt. Quality stuff.

But is this a build worthy of worship? Well, a bonus supplicant created by Jarek sure seems to think so. I’m not sure exactly what is being offered here, but the use of a gold-chrome hemishere makes it seem like a rare treat indeed. Green Jell-O, maybe? (Who are we to question the desires of the ancient ones?)

Countess of Dis

If these beings have you wanting to look at other eerie creations, check out more featured builds in our Lovecraft tag!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO City and Friends Christmas Advent Calendar 2021 unveiled [News]

LEGO has unveiled the final two Advent Calendar themes for 2021 and a Micro-dolls are featured in the Friends set instead of the usual Mini-dolls. These will be available for purchase in September 2021.

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

TBB Cover Photo for August 2021: Home – where fondness meets tranquility

After a weary journey, there is one place that is welcoming and puts the soul at ease… Home! And no matter where your heart lies, this enchanting LEGO scene by Arfelan Nest will take you to a place that whispers tranquillity and blissful peace.

Home

The framing of the build almost places you ready to take your first step to enter, yet is tempting you to come in and restfully explore what lies within. The out-of-focus teapot in the foreground -through to the paneling on the sliding doors behind the garden, set the scene with depth, intention, and true staging mastery. It is then, on closer look, you will find the technical skill tucked away within each section of this well-planned space – the dark green garden bed itself consisting of a slight valley and the simplistic, yet the intentional selection of light grey parts to cleverly convey the placement of stones.

Arfelan’s use of a minimal palette has resulted in a great showcase of intentional colour, drawing your eye in the desired direction for the story to unfold. There is no doubt, that this scene is where fondness meets tranquillity and smiles shine bright… or to put it in another way, this… is home!

Submit your LEGO creations for a chance to be featured across TBB social media for a month! Check out the submission guidelines and share your builds today.

Keep up with The Brothers Brick by liking us on Facebook and following us on Twitter and Pinterest. And for extra goodies, follow us on InstagramFlickr, and subscribe to us on YouTube, or join us on Discord.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Save all the bricks and bytes of data by building your own LEGO Floppy Disks [Instructions]

Builder Kos Brick flexes his building skills with these very accurate looking Floppy Disks from the early days before computer hard drives became the de-facto way of booting up Operating Systems and storing data. You can now build your own LEGO floppy diskettes with the video instructions he’s provided. Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.