Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

You’ll have a hauntingly good time aboard the Flying Dutchman

The Flying Dutchman has been haunting the minds of those who enjoy a good maritime legend for centuries. The ghost ship no doubt haunts W. Navarre‘s mind, inspiring this cool LEGO creation. This build is for the Iron Builder challenge, specifically the use of giant green minifig hands. The use of them here is subtle and cool. Can you spot them? They’re the cannons! Their bright green color is perfect for a ghostly vessel doomed to roam the seas for all time. Speaking of subtleties, I really like the hints at otherworldliness on the ship. Those details don’t overwhelm the structure of the ship itself, allowing it to pass as an old sailing vessel–until you’re up close and personal. The ghostly touch I like the most is the curved flame piece at the top of the central mast. It’s the perfect part for that tattered, ethereal flag look.

Ghost Ship: The Flying Dutchman

Continue on, if ye be brave enough

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Exploring the cycle of life and death in all its haunting beauty

The cycle of Life and Death is something that most don’t like to think about, because it’s seen as scary. However, as we see here in this LEGO build by Dylan Mievis, it can also be beautiful. This build is for the Bio-Cup contest, where builders have to use pieces from Bionicle, Technic, Galidor, etc. The theme is “Nature”, and there’s nothing quite so natural as Life and Death, which Dylan describes as a “beautiful symphony”. In the build we see a potted plant growing up and through the seated human skeleton. The thriving plant brings a sense of wonder and grace to what would typically be frightening and stark. Of course, the plant doesn’t hold a monopoly on beauty. The amount of detail in the skeleton is astounding! It’s not often we get to see the radius and ulna in skeleton arms, or the tibia and fibula in the legs.

Overgrown

Even the knee caps are present, and the fingers and toes articulate. The ribcage is impressive as well, a good use of horns. I really like the design behind the spinal column. The ball joint connector has always reminded me of vertebrae, and here it fulfills that purpose. And let’s not forget to mention the wheelchair! It’s full of fantastic Technic parts, from the wheels to the footrests. The simplicity of the plant twining throughout pairs nicely with the complexity of the skeleton and chair. There’s a bittersweet note with the gold ring on the skeleton’s finger, speaking to a life left behind… Altogether, this shows the balance and cyclical nature of existence. Life turns to death, and death to new life. Truly, a hauntingly beautiful harmony in the symphony of the universe.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Too deep to see

As the summer weather begins to truly set in, opportunity opens up for expeditions in calming seas. Builder BetaNotus was inspired by nature to create this deep submersible vehicle (DSV) using a wealth of Technic panels and detailed arm sections. The shaping of the large panel pieces have a wonderful flow that reads perfectly as the solid exterior of most DSV since battling the high pressure of the ocean depths requires a thick hull. The grill section on top is a great element for this style of craft and the yellow panels are nice additions to break up the monotonous white. Of course, once you’re down there, you’ll want to be able to see. Large lamps above and below the bulbous clear pilot section illuminate the surroundings, startling any creatures that might be floating in the dark.

DSV Tharp

With those claw arms, its super easy for the craft to interact with its environment. Sure, it might be a little jarring for the clam, but at least we get to discover the secrets of the deep. Come to think of it, this would be a great partner build with the Titanic set. Then you could fully recreate James Cameron’s classic. Maybe BetaNotus was thinking about this on some level.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO VIP Rewards: Tin Signs – For the completist who has everything else already [Review]

Back in November, we shared a review of the 1950’s LEGO Logo tin sign VIP reward. Since then, LEGO has introduced four more designs to help fill out your wall space – 5007155 Ninjago, 5007156 – City, 5007157 – Friends and 5007158 – Rebuild the World. Each is available one-per-VIP-account in the Rewards Center (US | CAN | UK). In the US they’re 1,200 points each with a listed retail value of $15. We caved and ordered all four – come along as we take a look at just what we got for our 4,800 points. (Spoiler alert: Not much.)

Click to read the full hands-on review

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

TBB Weekly Brick Report: LEGO news roundup for June 11, 2022 [News]

In addition to the amazing LEGO models created by builders all over the world, The Brothers Brick brings you the best LEGO news and reviews. This is our weekly Brick Report for the second week of June 2022.

TBB NEWS AND REVIEWS In last week’s Brick Report we covered Harry Potter and the Nano Gauntlet of Power, as well as LEGO’s announcement about price hikes. This week we’ve got a review of more DOTS and a spectacular amusement park set announcement.

OTHER NEWS Our news roundup includes other news from around the world, which this week recaps how LEGO turned itself around to becoming the #1 toy company and a hot lifestyle brand.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Pet the space doggy. What can go wrong?

Occasionally you hear stories of people with diminished reasoning and an overblown sense of entitlement climbing into a bear cage at the zoo to get a good selfie with the big cuddly teddy. Drama ensues and often the photo doesn’t turn out as post-wothy as expected. That’s just evolution working itself out, really. Speaking of evolution, LEGO builder Vohdoff demonstrates some highly evolved skills with Bionicle. Behold the Blooming Wolf! I’m loving the use of pretty pink flowers on this tentacle-butted beast. However, if it’s crouching hunter’s stance doesn’t signal danger the blade in its snarling teeth just might. I’m convinced to enjoy this odd creature from a very safe distance; lightyears away, in fact. If you’re braver than I am check out our beastiary of wild and wooly creatures in our archives.

The Blooming Wolf

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The wheels on the bus go ’round and ’round

I don’t know about you, but I have many memories of a bus very similar to this, taking me to and from school. Not all the memories are good, but, despite that, seeing the bus in LEGO form is pretty darn cool. Allen Smith recreates the classic school bus at almost a 1:43 scale, down to the last iconic detail. The 1995, Thomas built Saf-T-Liner MVP school bus serves as the base of Allen’s model. The most recognizable detail, at least for me, is the front of the bus. The particular way the flat face is interrupted by the slight curve of the windshield is crisp. I love the use of wands for the windshield wipers! It gives them just the right angling for the look. Something my school buses never had is that nice crossing arm. They added it for safety to keep kids from running out into the road before the driver gives the all-clear.

Thomas School Bus 1

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

An ode to the LEGO Aquazone theme that’s sub-stantial!

When first laying eyes on this gorgeous LEGO build by Sylon_tw, I couldn’t help but let out a Charlie Brown catchphrase. I mean, good g-reef! The variation in styles, heights, and colors amongst the coral break up the bed and keep the landscape dynamic. There’s some terrific part usage here, whether it’s brushes and technic pins for tubular sponge, or force lightning pieces for jellyfish tentacles. The submarine itself has some excellent shaping, providing a less-angular take on the Aquanauts sets of old. And I especially like the motion given to the build by the twirling bubbles coming off the sub’s dual propellers.

Aquanauts revisited

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO DOTS 41958: Extra DOTS Series 7 – SPORT [Review]

It feels like it was just yesterday (Okay, it was back in January) when we took a look at the Extra DOTS series 6 packs. But now the latest iteration of collectible tile semi-blind packs has arrived with 41958 Extra DOTS Series 7 – SPORT. They’re available now from the LEGO Shop Online for US $3.99 | CAN $4.99 | UK £3.49, and we bought a few so you could see what’s up. Because we love you.

Crack a pack or three with us

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Life-size LEGO raccoon, made of 3,750 pieces, is right up your alley!

With this taxidermist-quality replica of Procyon lotor, builder Felix Jaensch displays just how much can be done using primarily basic LEGO bricks and plates. I mean, this is the kind of shaping and contouring we’re used to seeing at LEGOLAND theme parks! The coloration here is perfect, and I especially like the pixelated fade from light to dark gray about halfway up the beast. Trying to balance a color gradient with 3D shaping can go wrong very quickly, but Felix handles it here like a pro.

Raccoon

Zooming in on the face, there’s the continuation of the stepped contouring from the body going down right to the end of the trash panda’s boop-able snoot. The other features added here (the eyes, ears, etc.) aren’t composed of the same basic bricks and plates as the rest of the body. Yet these features don’t feel out of place in the design. Despite introducing some slopes and curves, they don’t distract from the form, and gently draw attention to the key features of the animal.

Raccoon

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Sweetly a squirrel sleeps

I’ll admit I only have a few Bionicle LEGO pieces and, for reasons unknown to me, I’m often stumped as to what to do with them. But clearly Arcticpine is a master at building with Bionicle as evidenced by this darling little sleeping squirrel. This woodland creature is just a precious sight to behold. Maybe it’s just my dark and creepy sensibilities talking here but it doesn’t hurt that the entire form looks to me like a human heart. More to love, right? If you adore this as much as I do then take a gander at other impressive Bionicle creations on TBB built by builders who have a better understanding for how to use the odd niche pieces than I do.

Sweetly a Squirrel Sleeps

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Time to move over, McQueen!

I don’t know how he does it, but builder Djokson has managed to breathe life into yet another extinct LEGO Racer with his tribute to 4573 Lightor. We’ve seen prior successes from this builder in the past, but I’m particularly drawn to this one. Maybe it’s that color scheme, all ROY and no GBIV. Maybe it’s the outstanding parts usage, what with these windscreens in orange nested within a dump truck bed for the air intakes on the sides. I mean, those are some awesome side panels! No, I’d say it’s probably the driver. The engineering the make a figure with such character and yet such a skinny cross-section is like catching lightning in a bottle.

Rolling Thunder Lightor

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.