Tag Archives: Felix Jaensch

It’s like a window into my paunchy, balding soul

Felix Jaensch has used about 14,500 LEGO pieces to build this rather unflattering fellow and now I wonder if he has caught a glimpse of me checking the mail. Paunchy, check. balding, check. Coffee stains, socks, and sandals, disheveled appearance, surly attitude; check, check, check and check. I don’t recall giving you permission to build me in LEGO, you jerk! Upon closer inspection though, Felix tells us this figure is 175 cm tall, which is slightly taller than I am, so we can now add short to my list of qualifications as a slovenly malcontent. At least he didn’t swipe my total likeness after all. This dude bears a close resemblance to Carl from Aqua Teen Hunger Force but it isn’t quite him. Felix doesn’t state a specific person in his write-up but he’s a fairly average representation of what a lot of us are like.

Coffee Drinker

See him in his full, coffee-stained, grumpy, socks and Adiletten-wearing glory.

Coffee Drinker

Building life-sized sculptures are pretty much Felix’s thing. Check out our Felix Jaensch archives to see what I mean. Now get off my lawn, you ingrates!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Life-size LEGO raccoon, made of 3,750 pieces, is right up your alley!

With this taxidermist-quality replica of Procyon lotor, builder Felix Jaensch displays just how much can be done using primarily basic LEGO bricks and plates. I mean, this is the kind of shaping and contouring we’re used to seeing at LEGOLAND theme parks! The coloration here is perfect, and I especially like the pixelated fade from light to dark gray about halfway up the beast. Trying to balance a color gradient with 3D shaping can go wrong very quickly, but Felix handles it here like a pro.

Raccoon

Zooming in on the face, there’s the continuation of the stepped contouring from the body going down right to the end of the trash panda’s boop-able snoot. The other features added here (the eyes, ears, etc.) aren’t composed of the same basic bricks and plates as the rest of the body. Yet these features don’t feel out of place in the design. Despite introducing some slopes and curves, they don’t distract from the form, and gently draw attention to the key features of the animal.

Raccoon

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A silent raven’s call

This brick-built model of the common raven is a bit deceptive. Builder Felix Jaensch has a portfolio of impressive animal-inspired models but this raven seems to break the mold. Cleverly concealed in the sloping bricks along its back is a hidden button that allows the raven’s head and jaw to move. Pressing it gives the impression the model is calling out, albeit without the gurgling croak this bird often makes. This silent figure can’t audibly torment you, but it’s still a perfectly creepy build for this season.

Just looking at the model, it’s almost impossible to tell that it can move. The whole thing is a sturdy, brick-built structure that renders the bird in the traditional LEGO cuboid, pixelated form. Compare the below image with the above and you’ll only see tiny bits of movement in the neck. A change in angle of the structure holding the beak as the head moves down makes the smallest movements have big effects. Continue reading →

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A brick-built feline friend for you

There’s nothing that can replace a real, cuddly feline friend, but this adorable life-size LEGO cat by Felix Jaensch is a pretty good contender, at least as far as the realm of inanimate objects goes. While the majority of the build employs the classic studs-up style using mostly basic bricks that’s familiar to LEGOLAND visitors the world over, the result is excellent shaping of the cat’s smooth curves. The grey tuxedo coloring also adds a lot of interest to the build, breaking up the shape. Plus, I’m just a sucker for life-size builds. I’d totally have this in my office—wouldn’t you?

Cat

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Time with a child is time well-spent

As a parent, I love spending time with my kids. Builder Felix Jaensch‘s “Orang-Utan with Child” creation is a beautiful tribute to those who play with LEGO with their kids.

Orang-Utan with Child

There is so much that I love about this. Let’s start with colors: it’s incredible how accurate the orangutan is, with the parent having orange marking around the mouth and the child showing lighter colors. I’m equally stunned at the layering Felix did in replicating fur with bricks. It looks so real!

Orang-Utan with Child

The tree itself is worth mentioning. Small color splotches help identify the tree as being in a weathered environment.

I hope to see more amazing builds like this from Felix this year!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Rattus LEGOlus is a most uncommon rat

In my opinion, rats have earned an unfair reputation… maybe it started with the whole bubonic plague thing, or maybe it’s the fact that they have a tail that looks like a snake. Whatever the reason, I think that we can all agree that this rat by Felix Jaensch is anything but common. The subtle angle on the side of the face is a nice touch, and the underside of a round plate for ears, along with simple sloped parts for the hands and feet are simple but effective.

Rat

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A pretty pair of parakeets

Ah, love is in the air! In India, it’s the tail end of the breeding season for the ring-necked parakeets. These sweet birds are busy raising this year’s youngsters, and looking good while doing it! Leave it to Felix Jaensch to immortalize a pair in LEGO. Many times over, we’ve seen gorgeous animals from Felix, but they continue to impress us. For me, I think I’m most appreciative of the fact that he can show us the same bird in twenty different poses, and they’ll all look great. The realism is exceptional.

Ring-Necked Parakeets

While you’re here, I definitely recommend taking a look at Felix’s other animals. We’ve featured many of his creations, but in the spirit of this avian duo, how about some birds? To list a few, check out a magpie, a blue and gold macaw, a kestrel, and even another parrot with a baby (plus a toucan for good measure).

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

She brings grumpiness to life

Builder Felix Jaensch has constructed a life-sized LEGO figure he calls “Grumpy Girl”. He tells us “she is in a huff at the moment” but offers no other explanation for her dour demeanor. Maybe she’s cold? Annoyed? Maybe she’s in a huff at the condition of the world today? Maybe she just doesn’t want to turn that frown upside-down right now. Who knows, this piece poses more questions than answers. But there is no denying the skill needed to bring this grumpy young lady to life.

Grumpy Girl

This shot offers up clear details, her lips in a pout, her well-sculpted nose, and even her zipper on her hoodie are all amazing details. She’s seen some things in her day and she’s a bit peeved by it, and that’s OK. While her expression may be dour, she still puts a smile on my face, even for just a little while.

Grumpy Girl

Here are plenty of other times Felix’s life-like work has made us smile.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The strength of family

Early last year, I wrote an article about a pair of LEGO meerkats and mentioned the species’ vigilance and protectiveness. And it’s true, these little guys are one of the most family-oriented animals in the world. It’s the job of every member to take a fearless rotation as babysitter or sentry, and when there’s danger they act as one “mob” to defend themselves. Quite impressive! When I saw this build by Felix Jaensch, I swore I had seen it before. But maybe that’s just because he’s such an incredible artist of lifelike LEGO art.

Meerkats

While these guys are certainly impressive, I wouldn’t even say this is his best build. We’ve featured many more, including a rabbit, macaque, red panda, hamster, kestrel, and blue and gold macaw.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Easter’s symbol of fertility

Whether you’re religious or not, Easter is a great time to recognize the breath of fresh air that is springtime. The flowers are blooming and baby animals are coming into the world. Rabbits, well known for their prolific ability to procreate, are the adorable mascots of the season. The candy-filled eggs (also a symbol of fertility) are a pretty cool bonus too. Although it doesn’t come with eggs, Felix Jaensch’s latest build sits amongst the best LEGO bunnies around. Most are sitting or standing, but laying down makes this one catch your eye. Realistic as always, it is more proof that he certainly has a keen eye for organic shapes!

Rabbit

If you can’t get enough builds for the occasion, this cartoon-ish bunny is full of character!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Bringing LEGO to life with a handsome macaque

It takes a great deal more skill to sculpt with basic LEGO bricks than you might think. The ability to produce organic curves from rectangular bricks is awe-inspiring, and strikes envy in those of us who are always searching for that perfect shape. Upon seeing this life-size Rhesus macaque, I knew it had to be the work of Felix Jaensch, who is a master of the art. I must say, it really could not have been done better!

Rhesus Macaque

Adult males like this one (just in case you weren’t sure if it’s a male) are about 18-25in long and weigh an average of about 16-19lbs. They have an expressive face, which is perfectly captured here. Additionally, the lovely use of a select few slopes gives the fluffier bits texture and character, and the minifigure hand to finish the nose is genius!

Rhesus Macaque

Rhesus macaques are probably the most commonly known macaques in the world. That’s partly because these monkeys have a massive home range in central and southern Asia, and are invasive in several other places in the world. They’re also widely studied and used in research due to their high level of intelligence and fairly close physiological relation to humans. It was a study of their blood that led to our understanding of the Rh blood-typing system we use today!

If you like Felix’s style, check out some of the other life-size animals we’ve featured, like his Red Panda, Macaw, Rabbit, or American Kestrel.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.