Category Archives: Models

This is what we’re all about. We scour the web for the best custom LEGO models to share with you. From castles and spaceships to planes, trains, and automobiles, you’ll find the best LEGO creations from builders all over the world right here on The Brothers Brick.

A warren for the Weasleys, built of more than bricks

This amazing LEGO family home for the Weasleys has been beautifully constructed out of approximately 5000 bricks by the talented team of Martin Latta and Camille Jongy. The Burrow, as its fondly called, is a magical masterpiece of constructed quandaries. This rendition pays excellent homage to the fictional homestead found on the outskirts of Ottery St. Catchpole in Devon, England. It’s the texture work here that really does it for me. The meshing of vertical and horizontal sections throughout gives an unmistakable feeling of the hodge-podge expansion of their family home. Presumably held together by assorted masonry, magic and carpentry, the colour palette used over this impressive build is marvelously apt. The earthy tones and techniques involved in texturing the Burrow are only one side to a plethora of perspectives through you could look at it.

The Burrow

Click here to see more of this magical homestead

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

An extra-mobile home

Ah, the joys of the great outdoors! Nothing like getting out on the road at the weekend with your caravan in-tow. Or, you could take a leaf out of Markus Rollbühler‘s book and take your caravan off-road and into previously inaccessible territory with this insane van-bearing walker setup! This bonkers LEGO creation is wonderful — packed full of nice little building touches. Check out the whips as pneumatic cables, the smart little camping chair, and the shaping on the caravan itself. And there’s a great balance of colour going on in the composition too, with the dark green legs providing a lovely contrast to the pale blue caravan.

Unusual LEGO Mecha

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A dragon that is also a crane and an excavator and a wrecking ball and...

So I have been building again. This one was quite a stress-free build, inspired by my other recent dragon, Dragon Unit LL-32167. I was struck by a moment of inspiration about a month ago and realized that I have a yellow 24-toothed gear that would work perfectly in the dragon’s neck. The thought process continued with the idea that if I build a dragon using no light gray and (almost) no blue, I could keep the previous one assembled for a longer time. This means that everyone visiting my tiny local LEGO shows/conventions may have a chance at seeing the two mecha dragons side-by-side. I name this awesome construction worker mecha dragon Workhorse.

Click here to read more about my latest build and a comparison with my earlier similar build

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Black IKEA bath mats? I thought you said Baphomet The Black Goat!

How many times has this happened to you? You call up IKEA customer service and in botching up the admittedly difficult names of one of their do-it-yourself furniture offerings, you unwittingly summon some demon hell-beast from the underworld. Wait, never? I can’t count the amount of times it has happened to me. Avery Robertson knows what I mean. Probably. Using some clever build techniques, she has conjured up Baphomet The Black Goat and now he’s here to loaf on your Söderhamn sofa for awhile. The LEGO wings and star hair clip usually come in pretty pastel colors but with a red filter the whole shebang is made to look scary as hell. Tattooed on his arms are the words “solve” and “coagula” which either means “dissolve and coagulate” or “loveseat and ottoman” in IKEA speak.

baphomet_002

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The air dragon soaring above the stone and water

I love LEGO dragons, and the air dragon Bandea from this immersive (almost) fully LEGO scene by one of our contributors, Benjamin Stenlund, is one of my favourites from the past few months. The body is chunky and curvy like a “real” dragon is. What gives it the edge are not the Ninjago sword edges, but the awesome background it is presented on. The horizon is put on just the right point with the corresponding camera angle. What I love most are the realistic rocks, made of wedge slopes and polygonal panels fitted together to represent the cracks and angles of a real rock face.

Flying to Varlyrio

The builder has quite a few elemental-themed dragons in his portfolio: Moto the Fire Dragon, Maji the Water Dragon, Hewa the Air dragon and Daera and Kijani, the Earth Dragons – the last one being my personal favourite so far.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A palace fit for the sun

In the realm of LEGO castle builds, most of what we see is based off the European stereotype of grey fortresses, but thankfully this year’s Summer Joust building competition has a category for Middle Eastern creations. Instead of boring old grey, we get intricate tan! Talented castle builder Classical Bricks brings us the gates to a palace called Qasr Alshams, beautifully decorated with a touch of teal to complement its earth tones.

Qasr Alshams

What draws my eye in the build is the amount of depth alluded to by having the different levels climbing higher and higher; what we see is just a small segment of what is undoubtedly a sprawling palace complex, complete with baths, a harem, dining rooms, administrative offices, and everything else that I have read about in the Arabian Nights, but it seems much larger. The battle droid legs make for an excellent railing above the gates, and the heads of the same droids make a nice detail beneath the battlements on the left. My favorite piece usage, though, is the pickaxes for door pulls on the gates. After a long ride on my camel through the desert, across the hot sand—I don’t like sand, since it is coarse and rough and irritating and gets everywhere—this looks to be a welcome place to stop and rest. That’s assuming I make it past the guards, of course.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Duck duck robot

What do you do if your robot walker develops a waddle? Make it a feature rather than a bug, of course! At least, that’s what I like to think happened in the backstory for Moko‘s latest LEGO creation. This Mecha-Duck is a delight, nicely-built with some cool mechanical details, but also invested with a brilliant sense of fun and character. I’m pleased to see that, like its inspiration, the walker is also amphibious — there’s a little red propeller sitting at the rear, allowing for effective transportation on water too.

Ducky

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A day of winter fishing in the solace of frozen silence

A prolific LEGO builder who’s graced our pages before, Ted Andes has presented a creation I resonate with at the moment, Winter. I’m typing this from Victoria, Australia, where the frosts and bleak days have been many. This beautiful vignette, a small capture of a snowy morning on the edge of a siheyuan. I can almost feel the stillness in the air.

Winter

Andes’ parts use is always exceptional, though not just in obscure part usage. His harness on basic parts to get the maximum effect is outstanding. The bare tree is made from roughly thirteen different pieces, twisted into some outstanding, gnarled forms. See if you can spot them all — can you see any I’ve missed? The river and its edging is also another highlight for me. The 4L trans-light blue bars surrounding some fish is a nice touch, giving the impression of icy cold, rushing water. Having the land predominantly in two colours has also worked elegantly, while the simple touches of trans-clear near the edge of the river have brought it closer to the reality of the camping trips I’ve taken in winter.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Yup. That’s one fully Assembled Avenger

By now the ending of Avengers: Endgame has been well and truly revealed to the world through Disney’s own marketing. The fact that Captain America can wield Thor’s hammer is common knowledge. Regardless of how you feel about that sort of spoiler, you are sure to find joy in Sam Beattie‘s recreation of the iconic moment in LEGO. Sam has enhanced the build with a few custom stickers, but even without them, there’s no question of what you’re looking at. (LEGO has released a large scale figure of Cap in the past – 2012’s Buildable Hero Captain America (Set 4597). I think it’s fair to say that the look there is…somewhat less accurate than’s Sam’s.

Some of the fun details from the build are the use of a gold ingot for Cap’s belt buckle and the whip used to shape Mjolnir’s strap. I also like how the support beams in the rubble work well at this larger scale. Standing atop that rocky and flame-strewn battlefield, Cap looks ready to kick some serious butt. And speaking of butt, here’s a rear view of the build showcasing “America’s ass.”

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Set sail amongst the clouds

It’s a Sky Pirate’s worst nightmare when The Valvalevidan hoves into view. AdNorrel‘s massive steampunk flying vessel is a wonderful LEGO creation — beautifully detailed, and packed with functional-looking elements. The overall shape carries a faint whiff of Jabba’s Sail Barge from Return Of The Jedi, but that’s no bad thing. I love the touches of gold and the striped sails, and those lanterns on the raised rear deck are excellent.

LEGO Steampunk Airship

The airship is 80 studs in length, making for a formidable construction project which took 9 months to put together. However, all that space is put to great use with some fabulous details. Here’s a close-up view of the impressive motors which keep the ship moving when the wind drops… Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

For the life of every plane, I will keep watch.

A good LEGO creation will be good despite the motive and theme it depicts. Some times though, a build comes up that is both built well and plays on your personal interests. The builder that does that to me most often is Eero Okkonen. If you have been following The Brothers Brick for a while you are probably familiar with Eero’s beautiful character builds of various themes, many of which come from the Magic the Gathering trading card game, just like this particular one.

Nissa Revane

The build represents an elf planeswalker (basically a glorified mage) important in Magic’s storyline. The character’s likeness is incredibly well captured in LEGO, especially the iconic green markings on her face. The clothing and posing is great as well, with a flowing green cape and a green flame in her hand. You can read more about the build on Eero’s blog, Cyclopic Bricks. The builder is so good at capturing iconic characters that one could call him an Iconic Master…

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Batman – Steaming Mad at Criminals

Marvel Comics has their multiverse — alternate realities where the heroes you know are reimagined as something new. DC comics does something similar with their own characters, usually super grim and dark ones resulting from the timeline being broken by something the Flash did. (Really. It’s a trope.) But sometimes these stories can just be bight spots of fun, and if you’re really lucky you’ll get to enjoy one of them in LEGO form. For instance, have a look at this take on Batman and the Batmobile by Breado’s Bricks. Batman always has a ton of resources, so what if he really leaned into the glitz as much as the flying rodent thing? You might end up with the steampunk version we see here. Decked out in gold chrome elements, cape and cowl, and body armor, this Batman may not be stealthy, but he certainly is shiny.
SteamPunkBatRod2
SteamBat brings this sense of style into his ride as well. The BatRod mixes the traditional BatBlack with new and improved BatGold accents. Mag wheel covers and rims echo the highlights in the engine and exhaust. Even more gold adorns the front grill and headlights.
SteamPunkBatRod8
No matter what angle you view this car from, you’re going to be well aware that SteamBats has a lot of cash to spend. Take that, criminals!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.