Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

A lovely scene at the seashore

When you are feeling stressed out, where do you go to unwind and re-connect with nature? Maybe someplace like this tropical beach by Brickleas, built for an Iron Builder contest using the white radar dish piece, used quite skillfully as steps, a sign, and shades to block the sun on the roof. And in case you missed it, the seagulls as well. One of my favorite features, aside from the shack, is the sand and surf, using slopes and bricks in shades of tan, including dark tan for the sand at the water’s edge.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Morning at the Museum

True story; I had a chance to work after hours at the Pacific Science Center in Seattle. I was contracted to paint display backdrops for a Mars exhibit. It was late at night, long after the patrons and staff had gone home and a security guard and I were the only two people there. I can say with confidence that a museum at night is a strange and eerie place. Some lights are on, others are off and incidentally, they leave the animatronic dinosaurs turned on so they were moving and roaring throughout the night. This LEGO creation called Morning at the Museum by Alex Eylar reminds me of that experience. To be clear, the skeleton T-Rex is from this set but the environment Alex has built for it and the lighting makes this a stellar creation indeed. Alex is quite good at setting a mood in LEGO. Check out what I mean in our archives.

An adorably unconventional couple

The holidays are approaching and gifts are on everyone’s minds. Though this time of year always brings its challenges, any gift-giving occasion can be a builder’s excuse to create something personal with LEGO. For instance, figure builder Mike Nieves recently gifted his newlywed friends this elegant fox posing in the snow with a fluffy penguin. Presumably their favorite animals, I’m sure the couple was delighted to receive this gift. I do wonder if they used them as cake toppers though.

Taking a look at the models individually, we can see that the builder had a good idea of the necessary forms and connections. The penguin’s thick, grey body consists of two mirrored sections of stacked plates and slopes. Modified plates are used as happy little feet peeking out from under the body. The wings’ connections are hidden but hinged, allowing it to flap about adorably. The rotating head even has a tiny opening mouth, which is pretty cute.

The fox is rather impressive. The slender, brick-built face closely matches the natural angles of the animal and this trend continues down the body. Clever connection points allow Mike to build out from a central core to achieve the fox’s figure. The chest is fluffy and the paws really stand out but that tail is the true star. I mean, the way the color blocking takes advantage of the structure is just smart.

It’s worth taking a look at the back of the fox to get a better idea of how it’s put together. Plus, I just wanted to look at that tail again. Achieving curves like that with LEGO is difficult and Mike really did well with both of these. What a great wedding gift for LEGO fans.

I want Dragon Lands sets for Christmas

The last LEGO castle theme was LEGO Nexo Knights. Whether you think that was an actual castle theme is debatable. LEGO has released some castle-themed sets since, but not a full-blown castle theme. Sure, Harry Potter sets are mostly castles, but it’s just not the same. So, what do you do when LEGO doesn’t sell what you would like to buy? You create it yourself! Aaron Newman created not a castle set, but an entire castle theme titled Dragon Lands. Filled with elves, orcs, wizards, knights, and of course dragons. Each model looks like it could be produced by TLC. Each set comes with action features and the minifigures have a background story. Even the photography is comparable to LEGO catalogue quality.

Aaron’s amazing work doesn’t limit itself to an amazing cathedral that hinges open to reveal its lavish interior. The theme also includes a ship with festive flags, ruins covered in snow and ice, a sea serpent, a massive crossbow, a rock-dropping dragon, and last but not least a very inclusive cast of minifigures to accommodate these lovely creations.

Put the pedal to the metal (or punk or rockabilly)

Whether you have a real electric guitar or the new LEGO one it’s only a matter of time before you start tinkering with other sound effects. It would seem that LEGO builder Rubblemaker is also astute at making music. The set came with a tiny, measly foot switch so he remedied that situation with a petal board suitable enough to turn any aspiring guitar player into a rock god. From guitar to amp we have a Cry Baby Wah Wah Pedal, a Rat distortion pedal, BOSS Chromatic Tuner, BOSS Chorus, BOSS Phaser, and lastly (my favorite) the Electro-Harmonix Big Muff Pi providing a nice throaty fuzz.Put it all together and you’re ready to get the band back together. We’ve grooved to Rubblemaker’s tune before, Click the link to see.

A silent raven’s call

This brick-built model of the common raven is a bit deceptive. Builder Felix Jaensch has a portfolio of impressive animal-inspired models but this raven seems to break the mold. Cleverly concealed in the sloping bricks along its back is a hidden button that allows the raven’s head and jaw to move. Pressing it gives the impression the model is calling out, albeit without the gurgling croak this bird often makes. This silent figure can’t audibly torment you, but it’s still a perfectly creepy build for this season.

Just looking at the model, it’s almost impossible to tell that it can move. The whole thing is a sturdy, brick-built structure that renders the bird in the traditional LEGO cuboid, pixelated form. Compare the below image with the above and you’ll only see tiny bits of movement in the neck. A change in angle of the structure holding the beak as the head moves down makes the smallest movements have big effects. Continue reading →

This unwelcome visitor makes your opinionated uncle seem delightful

We’ve all had to put up with that one unwelcome visitor, right? Usually it’s an opinionated uncle with some harebrained QAnon conspiracies or a boozy aunt with a penchant for family drama. Both will wreck the toilet and both will ask to borrow $12,000 by the end of the night but they keep getting invited back because they’re family. Well, imagine a visitor so unwelcome that not only is it adept in its toilet wrecking abilities but it’ll also scramble your brain and make you do its unspeakable bidding. That is precisely the kind of unwelcome visitor Ivan Martynov has rendered in LEGO. Meet Ur-Lugal, a being so strange it is clearly not from around here. It isn’t even from Belgium. Its planet of origin is unpronounceable and its tactics are insidious. Still, you have to admit that there are some rather charming built techniques at play here. It’s almost…welcoming.

Or is that the brain scrambling at work? I’m not even sure what’s right anymore. But what I am sure about is I like the stuff Ivan builds. Also where we go one, we go all.

This giant LEGO Death Star docking bay is large enough to hold the UCS Millennium Falcon.

Docking Bay 327. You might not remember the numerical designation, but you’re almost certainly familiar with the location. It’s the bay aboard the Death Star that the Millennium Falcon is tractor beamed into when our heroes are attempting their heroic rescue of Princess Leia, and it’s the location Luke is in when he sees Obi-Wan cut down by Darth Vader. As parking spots go, it’s one of the most important ones in science fiction history. And now it’s been digitally created by Lysander Chau in a scale suitable to house LEGO’s UCS Millennium Falcon (10179) from 2007. The first thing you’ll register is the sheer size of the model, but this thing is as detailed as it is massive.

So slip on your Stormtrooper disguise and click here so we can take a look around.

The release of a balloon string tugs at our heartstrings

Sometimes it can be easy to forget that LEGO isn’t just a medium for spaceships, dinosaurs, and sports cars. Brickleas reminds us that LEGO can be fine art with this Iron Builder submission inspired by Banksy’s Balloon Girl. The seed part for this match-up was the 3 x 5 deltoid panel, and it has been put to excellent use here as both the balloon and the girl’s dress. The use of varying shades of gray adds an extra feeling of depth to the hills, and there’s an excellent sense of motion in the girl’s windswept hair. The result is a powerful build that evokes a wistfulness in the viewer.

Yngwie Malmsteen arpeggios your face off far beyond the sun

With LEGO coming out with the official Fender Stratocaster set it was only going to be a matter of time before someone becomes inspired to build guitar legends who play the Strat. It has happened and that builder is Steven Wayne Howard and the guitar legend he has built is none other than Yngwie Malmsteen. This guitarist is so legendary that throughout the 80’s I thought his middle name was Freakin’ or some variation thereof. One of the builder’s absolute favorite performances of his was from the live show in Leningrad in 1989. He has rendered Yngwie’s resemblance nicely; his heavy metal hairdo comprises mostly tree sprigs in brown, the ruffles of his shirt use the solar deltoid part. Even his pants appear to be leather thanks to some rendering trickery and lighting. Steven tells us this creation is 2,642 pieces and is 30 inches tall.

This shot offers a close-up view of his face and those aforementioned LEGO solar panel pieces nicely mimicking a ruffled effect.

You LEGO purists may want to cover your tender ears because it’s about to get cray-cray up in here. Steven tells us that this was created digitally using Bricklink Studio, Mecabricks, Cinema4D, Octane, Greyscalegorilla, and Photoshop on a Puget Systems computer. Now that’s freakin’ metal!

A look at the next Harry Potter GWP set: 40252 Hogwarts Gryffindor Dorms [Review]

Any fan of the Harry Potter movies can recall the iconic scene where he is introduced to his first chocolate frog. Unfortunately, it jumps out the train window before he can taste it, but the real focal point is the included trading card. All at once, Harry is introduced to wizarding candy, a hobby, moving portraits, and, of course, Professor Dumbledore. (Plus, as we recall later, the existence Dumbledore’s important friend, Nicolas Flamel.) These trading cards have now become a “collect them all” feature of recent sets – a smart move by LEGO. If you’re hunting for the cards (2×2 tiles), or completing a Hogwarts castle, you may want to consider planning your next LEGO shopping trip between October 25th and November 7th, where you can get 40452 Hogwarts Gryffindor Dorms as a free gift with any Harry Potter themed purchase over US $100 | CAN $100 | UK £100.

The LEGO Group provided The Brothers Brick with an early copy of this set for review. Providing TBB with products for review guarantees neither coverage nor positive reviews.

Click to take a closer look!

There are rally cars, and then there is Lancia

As a little kid, I was so confused with how people could tell all the sports cars apart: they are all red, look sleek and drive super fast! How do you know which one is which without looking at the logo? As it turned out, all the iconic cars are actually so different, you need no more than 8 LEGO studs in width to capture a unique character. And this is exactly what Jerry Builds Bricks did with the lovely Lancia Stratos.

A 5-year-old me would not believe it if I told myself I could instantly recognize Lancia just in a straight row of curved slopes and the iconic headlights. And as an adult LEGO builder, I appreciate how the bulky Speed Champions canopy is fitted here. If only this small model had working suspension…