Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

Merrily the hobbits roll along

Frodo, Sam, Pippin, and the newly joined Merry travel by ferry in this LEGO vignette by Thorsten Bonsch. This series from Thorsten follows the first part of The Fellowship of the Ring. Here, we see the four primary hobbits traveling across the Brandywine River into Buckland. The color palette of this build is outstanding, allowing each detail to stand on its own among the others. When it comes to the building techniques, the roofing tiles on the structure draw my eye. It’s a simple technique, but quite effective. It’s just tiles on plates, but the tiles aren’t pressed down on the raised end. The rest of the structure is cool too, with the disheveled layers and angled brown supports. This is one of those locations in a LEGO build that I would love to visit if it were a real place. I would listen to the sounds of the lapping water on the riverbank and the nocturnal sounds of nature around the river.

This scene you may recognize from the movie as well, with a Ringwraith bearing down on the hobbits. In the book, upon which this vignette is based, this scene had less pressure on it. The book takes a lot longer to get Frodo and company out of the Shire, but there’s only so long they can take with a movie runtime to consider. Either version, the wraith takes the long way over Brandywine Bridge. Silly Ringwraith, shortcuts are for hobbits!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This LEGO bloom turns a magical artifact upside down

Some new LEGO Botanical Collection sets are dropping just in time for Mother’s Day, and they seem to have planted the seeds of creativity in the larger LEGO community. Dawn Sloboda, from LEGO Masters Season 2, brings us this single bloom with a magical twist. Dr. Strange’s Cloak of Levitation gets put to use to make some of the best petals we’ve seen on any LEGO flower. Here’s hoping Dawn didn’t have to endure any multiversal dangers to get her hands on four cloaks.

Smooth seas don’t make good builders

I’m sure we’d all like to have LEGO collections full of pristine bricks. The reality though is that they are not infallible, and sometimes we’ll come across a broken LEGO element and think it is good for no more than the trash. But as Josh (Sergeant Chipmunk) demonstrates with this underwater scene, broken bits of LEGO do still have a use! In this case, a selection of flex tubes that have seen better days are used to represent a broken mast in a sunken ship. The rest of the scene is equally is good – the shaping of the ship’s hull is great, and the rockwork poking through the bow makes it clear it has been beneath the waves for a long time. Those waves, incidentally, are made up of tiles and clips that allow for a wavy shape that, while fragile, gives a good impression of a sea in gentle motion.

Swallow kite in black and white

I tend to build in minifigure scale. Therefore I am mostly drawn to other builders’ creations built on the same scale too. However this beautiful Chinese kite creation by Dicken Liu caught my eye. Limiting themselves to using only black and white for the kite, and brown for the kite rod. I am by no means an expert when it comes to Chinese culture, but a quick google leads me to believe this creation is inspired by a traditional swallow kite. I love the use of bats and curved plant stems for decoration. But what I like most is how the decoration on the wings reminds me of the plant plate piece. Also have you spotted the Mickey brick used as a blob of paint?

Terror of the Cretaceous seas

Two and a half years in the making, builder Cornbuilder gives us an awesome LEGO representation of a prehistoric terror. Meet the Tylosaurus Proriger, one of the largest known specimens of mosasaur. The average length of these mosasaurs was between 12-15 meters. To put that into perspective, the biggest predator in present-day oceans is the orca, which measures around 5-8 meters. Tylosaurus is nearly twice the size of an orca, and Cornbuilder captures this immensity beautifully!

A great amount of care is shown in the seamless lines and curves of the creature itself. The studs along the surface lend a scaly texture to its skin. This predator is both beautiful and terrifying to behold! Below, sea life as it may have appeared in the Cretaceous Era plays out. With the coral, fish, sharks, and other aquatic life, the Tylosaurus looks even more intimidating and massive. Count me out of any Cretaceous diving expeditions!

Speeding through the desert

This high speed LEGO speeder bike by Charlie screams fast! Bright red and sleek, the bike stands out from the rocky desert landscape below. Not that you would be able to see the landscape going at these speeds! While it doesn’t use a lot of parts, they are all well-chosen and flow together nicely. I especially like the use of the white rubber bands as pin striping while also acting as structure. The rocky ground below is also a wonderful combination of brick-built chunks and loose parts which give a very organic feel and accentuates the bike well. I’m always a fan of terrain to complete and build and this does a great job!

The great city of Sundari, Mandalore, beautifully recreated in LEGO form

Mandalore is described with domed cities littering the landscape and here, James Taylor captures the interior of one such City using LEGO perfectly in this sweeping cityscape from Star Wars. If like me, you are an ardent fan of the Clone Wars this is an instantly recognisable view of the Capital, Sundari, from the view of Mandalorians as they approach and slowly descend through the City to the Royal Palace. Take a look at just how James has captured the depth of the buildings here!

I love how, beyond varying techniques, James has used sizing of LEGO parts to introduce depth to the scene. In the foreground, James has used larger bricks and plates to capture the near buildings’ mix of geometric patterns that is a trademark of Mandalorian architecture. It turns into smaller plate builds for the buildings in the mid-ground, whilst still capturing the sleek lines and heavy use of 1×2 transparent plates to show the tall windows that are seen throughout the locale. Finally, serving as a backdrop to the scene, the grand design of the great doors to the Royal Palace is on full display and is put together with some nice building techniques to capture the delicate lines needed. Surrounding the doors, James has again stepped down to the smallest pieces to add crucial detail to the far cityscape again using various techniques to really set this incredible scene both in front of the doors and up to the sides.

Exploring the cloudy canopies of Algastarr

This LEGO build by Peter Stella shows us something wondrous aboard a stylish frigate. The ship we see here is a new version from a previous build of Peter’s that hadn’t met the builder’s expectations. Trimming the nose and the top of the engine block, this ship’s structure stands out with it’s new geometry. The colors really pop too! Check out that sand-blue inverted slope in the first blue stripe. I favor those teal blocks just below the stripe–such a cool color to see on a spacefaring vessel. However, the ship isn’t the only cool thing in this build; let’s talk about the planet. The floating islands are beautifully constructed using simple techniques that really shine. I particularly like the shaping of the leaves on the trees, and the use of an Indiana Jones whip on the small one in the bottom right corner.

Want to see more about this build, and what went into it? Peter has a great YouTube video detailing the ship, the islands, and how they’re all constructed.

Behold! An excellent LEGO D&D monster!

Other than its titular dragons, there isn’t a more iconic Dungeons & Dragons monster than the terrifying Beholder. And this version by Tim and Dannii from LEGO Masters Australia is a critical hit! The shaping and coloration are fantastic, and I love the bit of drool dripping out of that hideous mouth. All those teeth make for a menacing countenance the causes my level 10 warforged wizard to quake with fear. I also particularly like the ruins in the background. It shows some elegantly simple work with brown bars, and it sets a great scene without stealing the show.

The oldest trick in the book: a distraction

There’s a lot to love about this medieval build from Lego Fjotten. Purely speaking in LEGO terms, the two trees are wonderfully shaped, while the real eye-catcher must be the road and bridge. It uses the ‘Mjolnir’ sledgehammer piece, painstakingly lined up for a brick road look. It might have been a slightly tedious process, but the effect is well worth it! What really elevates this build, however, is the story it tells. A trio of Black Falcon knights have stopped to enjoy a sing-along with some buskers, and it looks like they’re having a whale of a time! But these buskers may well be in league with the two ruffians on the other bank – who are using this distraction to pilfer the Falcons’ gold and stash it under the bridge. I love how the story develops as you move left to right through the build!

A mighty battle to see us into Ragnarok

Simulterious captures some incredible action in his latest LEGO build depicting Ragnarok, the Norse end of days before all is built anew. Speaking of building, there’s fantastic construction on display within this scene! Simulterious has captured some naturalistic movement in the coiled sand green sea serpent, as it rears in readiness to strike the longboat and its remaining inhabitant. The curved tiles add a nice smooth line to the Serpent, with the plate with holder adding subtle detail to the spine and leading to a well executed brick-built head and crest.

The longboat itself is well engineered, and I love the use of a wing piece to shape the front of the vessel. The feathers work effortlessly as layered planks on the ship’s prow, leading up to the brick-built carved head of the vessel. The shields that line the side of the ship add a nice detail too, formed from tiles. The sail, made from shell pieces, looks as if it’s catching a last great gust of wind.

Its a good time to be a Viking longboat fan!

“Careful with my ship, Wrecker...”

Continuing his line of midi-scale LEGO Star Wars ships, FlyInSpace has built an Omicron-class attack shuttle. Specifically, it’s the Havoc Marauder – the flagship and mobile base of Clone Force 99, the Bad Batch, which LEGO also released as an official set, 75314 Bad Batch Attack Shuttle. There is nothing Bad about this fan-built model though! A singular wedge element is used upside down for the angular cockpit, and it’s the perfect piece for it. There’s some great texturing in the wings and body of the ship as well, with ski poles, ingots and roller skates used to give some added detail at this small scale. The edges of the solar panel wings are very well done with clips and bars (albeit with some fragile-looking connections). Perhaps that’s why Wrecker needs to be so careful with it!