Category Archives: Models

This is what we’re all about. We scour the web for the best custom LEGO models to share with you. From castles and spaceships to planes, trains, and automobiles, you’ll find the best LEGO creations from builders all over the world right here on The Brothers Brick.

The brick that loved me

The Q-Branch of MI6 in the James Bond series has a real fondness for outfitting flashy cars with even flashier upgrades. One of the flashiest has been captured here by László Torma in their outstanding LEGO model of the famous Lotus Espirit featured in The Spy Who Loved Me. 007 drives his souped-up sports car off the end of a dock and transforms it into a slick two-seater submarine. László has captured the clean lines of both versions of the Espirit. The slim black stripe across the side of the car is created by using a variety of brackets built on their sides. I want to give a special shout-out to the 2×4 bow above the rear wheel; this part has been around for a while, but I’m not sure I’ve ever seen it used this smoothly! I’m also sure László was happy by the release in 2003 of the 1×6 slope which used to make the clean lines of the car’s hood. All this fantastic comes together to capture the classic silhouette the Bond’s Espirit in the 8-wide form factor of a Speed Champions style model. Maybe one day we’ll get a Jaws minifigure to go with it!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Intensify the forward firepower! (And the detail level, too)

The official LEGO Star Wars Executor Super Star Destroyer is a great set. But if it’s missing anything, it’s perhaps a fully operational moon-sized superweapon to crash into after its shields fail and some crazy A-wing plows through its command bridge. This fiery diorama by Codyaner fixes that oversight with aplomb. The build captures one of Return of the Jedi‘s most thrilling moments as the mighty Imperial flagship collides with the Death Star’s surface, complete with backlit orange and red flames and a dazzling array of greebles (you know, the little doodads that give the surface its texture) to represent towers, power stations, and whatever else the Empire likes to stick on the surface of their surprisingly fragile planet-killing toys.

I can’t remember a better camera build than this Memento tribute

You won’t believe ~~his lies~~ your eyes when you see the details that go into this Polaroid SLR 690 from master of life-size LEGO props (and tbb alumn) Nick Jenson. This version of the iconic instant camera is a collapsable point-and-shoot model from the ’90s made famous in Christopher Nolan’s breakout film Memento. Nick is a stickler for accuracy as with all of his impressive 1:1 scaled models. The seed part that makes Nick’s model so accurate without stickers is the Polaroid tile from the film packet on the recent LEGO Ideas’ Polaroid set. Even the nylon strap is sourced from a LEGO-branded bag. To make this a proper tribute to Momento, the camera is paired with appropriately lo-fi photographs to match those in the film. Here the photos are real Polaroids, but the subjects are brick-built facimiles of Teddy and the Discount Inn from the film. At least I think they are… I can’t remember that far back. Thankfully I don’t need a tattoo to remind me when I see an amazing LEGO build like this one.

This little LEGO snowspeeder is more like Rogue 0.2 than Rogue 2

LEGO has invested heavily in Chibi versions of famous Star Wars ships with their Microfighters line. But not satisfied with the current offerings, Batuu Bricks offers their take on the T-47 Snowspeeder from Empire Strikes Back. The proportions are downright adorable, and all the tiled panels provide the perfect shape. But the real star of the show is that cockpit canopy. With an abundance of bars, clips, and two hockey sticks, Batuu provides enough space for a pair of Rebels at the controls. I’m sure they’re ready to take on the whole Empire by themselves!

This Warhammer-inspired LEGO diorama is fast in friendship and in enmity

What do LEGO dwarves have to be resentful of? Well, elves got their own fondly remembered line, orcs featured prominently as Castle foes for a spell, and dragons appear in multiple themes and get their own zodiac calendar year. Oh, the indignity! We can’t know what animus brings motivates the dwarven king in Illia Zubashev‘s grand diorama, but chance are it involves gold, elves, or grudges. Probably all three. Illia calls this creation The Hall of Grudges of Karak Izûm, a sacred site for dwarves of the Warhammer ilk. It’s a truly grand scene where a lone minifig king and the holy Book of Grudges are dwarfed by a hulking statue and a towering wall of brick and stone, showing the immense scale of the underground dwarven empire. Illia employs a solid mix of profile bricks, offset tiles, and SNOT work (studs not on top) in the impressive wall and floor. The chonky statue of dark grey and gold makes impressive use of 2×3 rock tiles for a chiseled beard. But perhaps the most striking element of the scene is the diamond window of jutting trans light blue crystals.

The evenly lit scene represents the hall at night. Even more striking is the daylight version, where light shining through the crystal window transforms the underground scene.

A spherical Star Wars battleship in a vacuum

Say what you will about the prequels, the opening scenes of the Phantom Menace are extremely compelling. The red Jedi cruiser approaches a Lucrehulk battleship – depicted for us here in LEGO by Jonah – for some tense negotiations. Jonah has made use of a number of classic techniques to capture the smooth curved lines of the ship in the notably square medium of LEGO. The center part of the ship is made using the Lowell Sphere, and the wider curve of the arms is made using hinge plates. Jonah has also added plenty of trans-light-blue accents to increase the visual interest of this build! Unfortunately this LEGO model will probably be short lived, as I can see a certain prophesied child in military hardware approaching bring this battleship to an unfortunate end!

A LEGO journey through childhood

Once again, builder Maxx Davidson has treated us to some delightful eye candy, skillfully incorporating not only LEGO bricks, but also other assorted elements that might require a deep dive into the internet to confirm their authenticity as “LEGO-branded.” Titled ‘Assorted Childhood Toys,’ the undiscerning eye would be hard-pressed to identify these as toys built out of other toys. However, the builder has expertly used LEGO to transport the beholder to a place of reminiscence.

Check out more pics of each of the toys below

A glimpse of the traveler’s journey through Middle Earth

From the LEGO builder Caleb Huet, we have a diorama titled ‘The Traveler.’ It’s a safe assumption that this scene intends to transport our imagination to somewhere in Middle Earth. Inspired by Jordi Escamilla’s ‘Waterfall,’ the builder has transformed inspiration from 2D art into the third dimension. Intricately crafted rockwork, lifelike tree builds, and mesmerizing water effects cover the piece, with each element of this diorama standing as a testament to the builder’s creativity and skill. Together, they create a scene that leaves us marveling at the potential of simple plastic elements to evoke such depth and beauty.

Have a closer look at the carriage centered over the bridge, and note the build techniques utilized in the bridge itself. Partially-connected bricks form the underside arch spanning between abutments in a great bit of brick ingenuity. The world of LEGO creations has been enriched by the vast and captivating content of The Lord of the Rings, so be sure check out some of the other LotR creations featured on TBB.

Finding oneself in LEGO liminality

There’s something a bit off in this LEGO setting devised by Pan Noda. The intentionally-grainy shot of this brick-built mall food court definitely gives a Backrooms vibe. In a space typically characterized by the bustle of shoppers, the smell of fast food, and the occasional offer of a free sample, the stillness that occurs after hours sure can send a shiver down your spine. It’s hard not to wonder what could be hiding behind a pillar or counter. In fact, maybe it’s best to just get out of here… if I still can.

And if you’re up for more spatial and architectural wonders by Pan Noda, be sure to check out the TBB archives.

Dance to your Death with Sekiro’s Corrupted Monk

LEGO and video games have proven to be a powerhouse of family-friendly fun, but combat in LEGO games is a pretty basic affair. If punishing action is more your speed, perhaps you’ve wondered what a LEGO Souls-like game would look like? If it’s anything like Marius Herrmann‘s Corrupted Monk from Sekiro: Shadows Die Twice, it would be a beautiful game indeed!

FromSoftware, makers of Elden Ring and Dark Souls, are known for their amazing enemy bosses that combine punishing difficulty with breathtaking dark fantasy character design. For many, the Corrupted Monk is the pinnacle of boss encounters, as dueling this demoness requires total mastery of the game’s robust combat system (unless you cheese the boss — no shame in that!). Marius’ model employs some incredible parts usage to capture the Monk’s haunting appearance, like the use of an inverted Ninjago Anacondrai helmet for a mouth and a frog for a nose. There are hand-strung beads made of eggs and flowers, as well as a vintage LEGO Scala pearl necklace for this classy lady of darkness. The color is striking, especially the draping tiled fabric in gold, yellow, and black. Given the vibrant colors, this is clearly the “True” version of the Corrupted Monk. Sekiro also features a spectral version of the boss, but I suspect creating a model this incredible using only translucent parts would be too punishing a challenge for even the most hardcore LEGO builder.

Relive the adventure of Jedi: Fallen Order with a LEGO Stinger Mantis

The Stinger Mantis is the iconic hero ship and base of Cal Kestis and his NPC companions during his adventures in the Jedi: Survivor and Fallen Order games. This fantastic piece of Star Wars design is recreated in high LEGO detail in this model by Tim Goddard. Tim has spared no expense, and pushed LEGO’s clutch power to achieve the outstanding greebling (or scientific texturing, if you will) on the ship’s vertical fin. I love the details on the outboard engine; the front of the engine is a white life preserver, while the rear nozzle features a ring of clip-and-tube-holders.

Check out more views of this cool LEGO Star Wars model

A fantastic build in more ways than one

My favorite LEGO set of last year (and possibly of all time) is the LEGO Lord of the Rings 10316 Rivendell set. I could wax verbose about that set, but I don’t have to — because everything I loved about Rivendell is back here in this piece, which builder Martin Gebert calls “Rivendell-inspired.” You can certainly see the official set’s influence — the organic blending of nature and masonry, the pastel greens and whites, the otherworldly architecture. And yet this build manages to take the fantasy even further — look at that lovely hanging fountain and the perfectly irregular smoothness of that outcropping. Best of all, this model (entitled “The Arrival of an Old Friend”) is just chapter 1 in a series, so be sure to follow Martin and keep exploring this incredible slice of a fantasy world.