Posts by Michael

Merrily the hobbits roll along

Frodo, Sam, Pippin, and the newly joined Merry travel by ferry in this LEGO vignette by Thorsten Bonsch. This series from Thorsten follows the first part of The Fellowship of the Ring. Here, we see the four primary hobbits traveling across the Brandywine River into Buckland. The color palette of this build is outstanding, allowing each detail to stand on its own among the others. When it comes to the building techniques, the roofing tiles on the structure draw my eye. It’s a simple technique, but quite effective. It’s just tiles on plates, but the tiles aren’t pressed down on the raised end. The rest of the structure is cool too, with the disheveled layers and angled brown supports. This is one of those locations in a LEGO build that I would love to visit if it were a real place. I would listen to the sounds of the lapping water on the riverbank and the nocturnal sounds of nature around the river.

07. The Ferry

This scene you may recognize from the movie as well, with a Ringwraith bearing down on the hobbits. In the book, upon which this vignette is based, this scene had less pressure on it. The book takes a lot longer to get Frodo and company out of the Shire, but there’s only so long they can take with a movie runtime to consider. Either version, the wraith takes the long way over Brandywine Bridge. Silly Ringwraith, shortcuts are for hobbits!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Terror of the Cretaceous seas

Two and a half years in the making, builder Cornbuilder gives us an awesome LEGO representation of a prehistoric terror. Meet the Tylosaurus Proriger, one of the largest known specimens of mosasaur. The average length of these mosasaurs was between 12-15 meters. To put that into perspective, the biggest predator in present-day oceans is the orca, which measures around 5-8 meters. Tylosaurus is nearly twice the size of an orca, and Cornbuilder captures this immensity beautifully!

King of the Seas

A great amount of care is shown in the seamless lines and curves of the creature itself. The studs along the surface lend a scaly texture to its skin. This predator is both beautiful and terrifying to behold! Below, sea life as it may have appeared in the Cretaceous Era plays out. With the coral, fish, sharks, and other aquatic life, the Tylosaurus looks even more intimidating and massive. Count me out of any Cretaceous diving expeditions!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Exploring the cloudy canopies of Algastarr

This LEGO build by Peter Stella shows us something wondrous aboard a stylish frigate. The ship we see here is a new version from a previous build of Peter’s that hadn’t met the builder’s expectations. Trimming the nose and the top of the engine block, this ship’s structure stands out with it’s new geometry. The colors really pop too! Check out that sand-blue inverted slope in the first blue stripe. I favor those teal blocks just below the stripe–such a cool color to see on a spacefaring vessel. However, the ship isn’t the only cool thing in this build; let’s talk about the planet. The floating islands are beautifully constructed using simple techniques that really shine. I particularly like the shaping of the leaves on the trees, and the use of an Indiana Jones whip on the small one in the bottom right corner.

The Floating Rocks of Algastarr

Want to see more about this build, and what went into it? Peter has a great YouTube video detailing the ship, the islands, and how they’re all constructed.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Honey, I shrunk the Republic gunship

This LEGO Republic gunship by Ron_mcphatty is a smaller take on a great vehicle from that galaxy far, far away! The ship is built on the midi-scale, which puts it between miniature and minifigure scale. This size allows for greater details than a miniature model, but less complexity and fewer parts than a model scaled to minifigures. And this thing is jampacked with details! We’ve got the rockets between the rocket launchers on top in the back, ready to shoot down any battle droid fighters. Clear radar dishes represent the swivel guns on the wings. Of course, that’s not all! The coloring of the ship stands out with the bright red and green against the stark white. That bright green is one of my favorite things about the ship, so I’m glad to see it all represented!

MOC Midi Republic Gunship P9

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

When a Ringwraith comes knocking

The next LEGO build from Thorsten Bonsch in this The Lord of the Rings vignette series is here! Hamfast Gamgee, the father of the hero Samwise Gamgee, receives a peculiar traveler. Frodo and Pippin learn of this event shortly after their own frightful encounter with a Ringwraith. Sam tells the tale of his gaffer’s visitor and the feeling of dread his father felt. Here, Thorsten paints the scene with greater detail than Sam in his own telling. Check out that thatch work on the roof of the hobbit home! The layering of grille tiles gives the roof a wonderful straw-like texture. Minifigure hands and droid arms stand in for disheveled bits of straw sticking out at the ends. This is a delight to see rendered in LEGO, as some thatch work can look too tidy without it. Another example of great texture layering is the plates and tiles making up the brickwork in the house’s structure. Also, be sure to check out that wheelbarrow!

06. Hamfast Gamgee

Continuing in the tradition established in the previous builds in the series, this vignette depicts the moment from the The Fellowship of the Ring book. The movie version does this scene with Farmer Maggot. In fact, Hamfast is only in the extended version of The Fellowship of the Ring film. Here, Hamfast gets his due! Personally, I’m really enjoying this series, as the books often get overshadowed by the movies in artwork depictions. Can’t wait to see what’s next in this ongoing vignette series!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Is that shadow from an aircraft or a giant bird monster?

Coming from the laboratory of builder Kevin H. this LEGO parakeet kaiju will have you running for the hills! The first thing I notice about this figure is the awesome neon green pieces. Makes me wonder if it’s radioactive… I particularly like the band on it’s belly, a panel popular in the Blacktron LEGO toy line back in the early 90’s. And since we’re looking at the details, pieces from the Bionicle toy line, like those claw hooks for talons, abound! They give the mechanical monstrosity a machine-like texturing that would make Mechagodzilla jealous. This build is as beautiful as it is scary, but I prefer it as LEGO than a real mech terrorizing cities. Though I’d watch that movie!

Parakeetastrophe

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Hobbits on the run and hideaway

Three is company, but four with a Ringwraith is a crowd. Coming from builder Thorsten Bonsch, this LEGO scene is the fifth build in a series taking on the legendary world of The Lord of the Rings. Depicting moments iconic to both the films and the books, these builds favor the books in the details. That’s why we see three instead of four hobbits–Merry didn’t join the group until the next chapter! Thorsten returns to this story moment after ten years away, though this time at a much smaller scale. What makes or breaks a build at this scale are the details, and the details here are amazing! Take a look at those tree roots, how they frame the hiding hobbits and flow towards the leaning tree. The tree takes you to the Ringwraith sniffing out the Ring, but Sam stops Frodo from revealing their location. These aren’t the hobbits you’re looking for, Ringwraith!

05. Hide!

Ten years ago, Thorsten realized too late that Merry wasn’t part of the group of hobbits hiding from the Ringwraith pursuing Frodo and the Ring. This time around, the mistake is corrected with Frodo, Sam, and Pippin in the hideaway. The ten year-old build is quite beautiful, and I recommend checking it out. It’s at a larger scale than this one, and on a steep slope rather than the hollow Tolkien described in the book. Also look forward to the next build in this Middle-earth vignette series! It will expand to other builders once Thorsten’s contributions are finished. I do enjoy a good adventure through Middle-earth!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Live from Lunar Base One: The Moon Rocks!

Meet The Moon Rocks, the grooviest and most rockin’ band this side of Alpha Centauri! Composed by Julius von Brunk, this LEGO build will knock your socks off with the hard rock jamming coming from this moon base. Check out the station they’re playing at — there are a lot of cool details making up the workings of the space base. The cool bendy tubing on the walls and the rocky foundation are awesome, but take a look at the mosaics. They possess fantastic details despite some plate color limitations. On the left, a window looks at Earth, no doubt experiencing some serious FOMO for the party happening on the moon! On the right is a huge jumbotron screen showcasing the band’s lead singer as they push the speakers to the max.

The Moon Rocks

Check out the concert!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A picturesque bowl of tasty noodles

This soba noodle bowl looks so good it’s hard to believe it’s made of LEGO! This creation comes from builder John Snyder for the annual LEGO contest RogueOlympics hosted by Roguebricks. John started with an idea for how to build the radish slices, and the rest came together from there. Bicycle wheels inserted into inverted radar dishes comprise the bright radish slices. Arm pieces from the LEGO Friends toy line make up soba noodles, which is a pretty cool use of parts I haven’t seen before. Even the chopsticks are brick-built! Of course, part of what makes well-crafted food look so good is the plating, and John doesn’t disappoint. The color balancing stands out, allowing the eye to pass over each part of the soup in a wonderful flowing movement. I don’t know about you, but now I’m hungry!

Soba Noodle Bowl

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Doctor Strange is in the house!

Experiencing dimensional infestations? Doctor Strange will make a house call to clear that right up for you! This magical LEGO build from Legomocs_501 went through a few iterations before this version emerged from the multiverse. What looks to be a normal house with a tall window quickly transforms, mirror dimension style, into a curving and broken walkway, sloping down towards grasping tentacles. The walls start peeling away until they’re but a memory to the dimensional rift threatening to consume the Sorcerer Supreme! The texturing on the wall fragments is very cool, achieved with plates and bricks of varying size. The grey plates bleeding down into the black of the base balance the sloping pathway by the tentacles. This keeps your eyes focused on the conflict between Strange and the intruding presence. This build captures the mind-bending nature of Doctor Strange and his adventures, making me all the more excited for his next on-screen appearance: Doctor Strange in the Multiverse of Madness!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Cresting the wave of a pirate’s life

Beware any ship what flies the crimson flag! This LEGO ship by Ralf Langer sails on the crest of two seas, ever searching for more riches. The ship is beautifully crafted, but make no mistake–this is a pirate ship! Besides, who says pirates can’t have nice things? The ship is loosely inspired by the Golden Hind, the galleon captained by Sir Francis Drake during his circumnavigation of the globe in the late 16th century. The sails are brick built, allowing for greater detail to capture the way they catch the wind. The ship itself sits atop two curved LEGO seas, elements reused from some of Ralf’s past builds. One has a town under threat of cannon fire, while the other has water stained with blood and a town burning from a pirate attack. The captain’s quarters bear remarkable stained glass windows, and that intricate detailing in the ship’s woodwork is exquisite!

The "Death of a Sailsman" - Model view

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This Roman temple is straight fire!

Behold, the sacred fire of Vesta! So long as it burns, Rome’s safety and prosperity is assured. Builder Antonio Cerretti uses LEGO to show us how this temple may have looked in its prime. The Temple of Vesta once stood in the Roman Forum at the heart of the ancient city. Dedicated to Vesta — the Roman goddess of hearth, home, and family — it stood for many centuries until it was permanently dismantled in the mid-16th century. We know what it may have looked like from coins and artwork, and here Antonio gives us a marvelous recreation built from LEGO! The temple’s adornments strike with their vibrancy, reminding us that the ancient world was filled with color. Clipped together, barbs and cow horns make up the details on the capitals of the Corinthian columns. Further up, light grey minifigure handcuffs give definition to the blue frieze between the columns and roof. Peer through the open entrance to see the sacred fire, burning brightly to keep the darkness at bay.

Tempio di Vesta B

The temple’s interior showcases the sacred fire and more wonderful columns. Clever usage of croissants make up the capitals of what appear to be ionic columns set into the curved wall. Then, we have the eternal fire in the center of the enclosure! A light brick is cleverly buried beneath loose translucent LEGO studs, giving the fire its warm glow. Simple flame pieces stick out from the embers like the reaching arms of a healthy fire. Undoubtedly, this build gives us a splendid glimpse into an aspect of ancient Rome, grounding the past in the present.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.