Category Archives: Models

This is what we’re all about. We scour the web for the best custom LEGO models to share with you. From castles and spaceships to planes, trains, and automobiles, you’ll find the best LEGO creations from builders all over the world right here on The Brothers Brick.

Not quite the angel you might have been expecting

As this sinister-looking creature, known as Zeurel, looms over the countryside, it’s hard to imagine that this beast is actually deemed as an “angel.” Hailing from the anime Neon Genesis Evangelion, these angels are antagonistic creatures, causing chaos and destruction. Builder Lache has interpreted the original design in Lego form as an entry for this year’s Biocup. The wide spread of tentacles provides the model with a sense of mass and power. The use of a large inversed tyre creates a bulbous form around its short but significant head. Penetrating eyes peer through the slits in a Bionicle mask which creates the puppet-like face. But the most impressive use of pieces has to be in the green landscape at the bottom of the build. It’s cleverly made up of various Bionicle parts such as Piraka feet pieces.

If you love Evangelion you can check more articles, on builds from the anime, here.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Say Magda, there’s a tree in your shed

When driving through the countryside, it’s a common sight to see a dilapidated barn in the distance, where nature has taken over. But it is much less common to see nature intruding on a well cared for building. Take this lovely shed by Andrea Lattanzio, for example. While it is clear that the roof has seen better days, the landscape and the exterior of this garden shed clearly receive a lot of love and attention from Magda, the owner. Almost every landscape detail is noteworthy, but my favorite unique part is the Minifig base for Sandman from the Marvel Spider-man franchise, used as a base for the pot to the left of the shed doors.

Mitgardia should be beautiful this time of the year, all that snow.

This snow-covered tower from Louis of Nutwood was an entry for a contest on EuroBricks.com. For a scene that could be very typical, there are some fun and creative touches here, like the textured gray walls and archway on the lower right. One detail I didn’t notice right away is the use of green and yellow minifigure arms for the flag on top of the tower.

Build aside, it’s great seeing people who take pride in crafting a story that ties in. Here’s an excerpt from the Flickr description:

Before reaching the arch of stone that divided the two worlds, he looked over his shoulder, beyond the path that brought him thus far. He glared beyond the mountaintops and the grey sky.

Beauty comes in all different shapes

One of the joys of building with LEGO is working with lots of shapes in order to create new ones. Clever builders will use parts with a particular origin and morph them into something with an entirely new purpose. Like shields for leaves or balloon panels for a vase base, or shoulder armor for petals. This expertly crafted render by _Regn takes it further by creating a particularly complex shape: a hyperboloid. Essentially, if you twist a cylinder at its center, you create an hourglass-shaped design. It makes for a gorgeous centerpiece!

Unfortunately, there are elements of this artwork that would likely be too difficult or impossible to build in real life. Those shields, for example, don’t come in green. And the connections would be very precarious. Still, it’s certainly beautiful to look at, and a superb bit of rendering!

If you’d like to see more flower-based creations, check out the exquisite new LEGO Botanical Collection and other custom flower builds in our archives. Oh, and if renders are your thing, we have plenty of those too!

The US Navy Dauntless Patrol Boat protects our shores

Sometimes we get commissioned to do what we love. That is exactly what happened with Jake Sadovich and his amazing LEGO Dauntless 34′ Patrol Boat. Whoever commissioned Jake must be mighty pleased with the level of detail he has achieved here. The complex curve of the bow, the guardrails, the armament, the electronic gear on the mast, even the handsome stand makes this a stunning model to behold.

Click here to climb aboard and discover more!

LEGO can’t really hurt me, right?

Is it a kaiju? A demon? Something from another planet? Whatever the answer, the Protoweapon XV1 – “Nightcrawler” – by Andrew Steele is certainly a threat to us all. With a form that’s an unholy fusion of mech and organic, this spikey beast is coming for us, and there’s nothing we can do about it. Personally, I hope I get done in by the clawed hands and not the yellowing clown grin.

Click here to see the monster up close.

Who says dinosaurs are extinct?

This colorful LEGO sculpture by Shannon Sproule is a pretty darn accurate recreation of a northern cassowary. It checks all the boxes in terms of color, shaping, and even size. In real life, this bird is mostly black aside from the head and it lives in New Guinea, northeast Australia, and surrounding islands. But one of the most notable things about it is that it’s giant and formidable. Its size and weight are comparable to the emu, although the emus have nothing on these guys when it comes to battle. Cassowaries are considered one of the most dangerous birds in the world.

These birds are actually pretty shy and try to avoid humans, but if threatened, they’re not afraid to attack. They can kick like a kangaroo and their dinosaur-like feet have terrifying raptor-esque claws. In particular, one toe has a straight spike that can get as long as a human hand. Yikes!

One of my favorite parts of this build is how well it’s photographed. Sometimes the right lighting can really make a build, and in this case the bird comes to life with that little bit of shine on the radar dish that is used for the eye. While you’re here, check out TBB’s other articles featuring animals. Shannon’s sci-fi/space builds have also been featured on our site.

There’s not a cloud in the sky…

Well, okay, there’s that pesky mushroom cloud off in the distance. But that’s not going to put a damper on our day, is it gang? Paul Hetherington has delivered a payload of nostalgia with this look at idyllic family life in an era when the worry of nuclear annihilation was as ever-present a threat as a neighborhood HOA violation. Paul says he was inspired for this LEGO creation by the style magazine Atomic Ranch, which focuses on Mid-Century style. And it shows. From the car in the driveway, to the architecture of the home, and even the furnishings inside, Paul has captured a snapshot of the era beautifully.

Click here to take a closer look!

How to train your Robot

We’ve been seeing some fantastic builds from this year’s Biocup recently, and here’s another one by Djokson. The model takes inspiration from comic book artist Ashley Woods and his Pet Metal paintings. The muscular robot has a military aesthetic and looks to have been repurposed by its new master. Kylo Ren’s mask is used backwards to create the helmet of the robot. There’s a great use of circles on this build; mainly in the form of tyre parts which really encourages you to stare into the robot’s glaring eye created by a golden ring piece. The hair piece for the woman is a really old part first featured back in the 70’s. It’s quite easy to imagine this pair trundling through the wastelands, maybe looking for a better pair of legs for the robot. You can see some more great articles about Biocup entries here.

Aloysius Animo, at your service

Fans of Ben 10 may recognize this Earth-68 version of the conflicted Doctor Animo, a genius in mutagenic effects and subsequently frequent bad guy. This build by The Underscored Double is an awesome representation of the character. The modeling and color-blocking hit on key points of his design, like the tech strapped to his chest or the exposed brain, antennae, and goggles. The claws are also a perfect match with the lime green accents. In addition to this villain, we’re also given a great version of an alien on Ben’s Omnitrix, the Stinkfly. The ghostly green color palette, as well as the translucent green head, compliment the wealth of interesting Bionicle and Galidor pieces used by the builder to mold this complicated character.

If you enjoy builds like this, check out some more characters. If you’d like to see more by this builder, you can find them on Flickr or Instagram (@theunderscoreddouble).

Anything can be a feather

The first thing that caught my eye when I saw this pair of birds was the use of the multiple Technic pin/axle combos. That’s a piece that doesn’t get a lot of use on the outside of a build. But closer inspection reveals that builder Seth Peacock has used all kinds of interesting pieces and techniques for the plumage of these two birds. Those are baby minifigure heads, for crying out loud. Seth says these birds were inspired by the work of Van Gogh’s The Starry Night and Sunflowers series, and he’s definitely captured the swirl and motion of the line work in those pieces. To quote one famous critic, “I don’t know if it’s art, but I like it.”

A much more affordable typewriter

Do you love the new LEGO Ideas typewriter but you don’t want to break the bank? I know how you feel. And it looks like Vant . does too, since they have built a pint-sized version of the new sand-green typewriter with an amazing amount of detail in a very small package (paper letter not included). While I love the carriage return and the curved front, my favorite detail is the ink ribbon made from lever handles.

You can see even more details from the top, like the paper guide connected with droid arms that can lift up just like the real thing. And don’t miss the letter keys made from a pair of claw elements and an unusual Bionicle part.