About Chris

Chris Malloy (porschecm2) has been a LEGO fan nearly all his life, having started with System bricks at age 3. He is the co-author of Ultimate LEGO Star Wars, and his creations have been featured in several books and The LEGO Movie. He also helped develop the first LEGO Minecraft set, 21102 Minecraft Micro World: The Forest, which has gone on to inspire a whole theme of sets. He's been active in the online community since 2002, and regularly attends LEGO fan conventions such as BrickCon and BrickCan. He enjoys building in a wide range of themes, but keeps returning to Castle, Space, and Pirates. Check out his LEGO creations and photography here.

Posts by Chris

LEGO 10283 NASA Space Shuttle Discovery with Hubble is revealed as 2,300-piece Creator Expert set [News]

2021 marks the 40th anniversary of the first NASA Space Shuttle flight in 1981, and LEGO is marking the occasion by launching its biggest shuttle set yet. 10283 NASA Space Shuttle Discovery rings in at 2,354 pieces and features the iconic orbiter on its most famous mission, STS-31. This 1990 mission launched the renowned Hubble Telescope, which is still in operation. The new 18+ Creator Expert set will be available starting April 1, and will retail for US $199.99 | CAN $269.99 | UK £169.99.

LEGO sat down with Dr. Kathy Sullivan, a former astronaut who served as a mission specialist on STS-31, to reveal the set and discuss the mission to launch Hubble, as well as talk about engaging children in STEM and space exploration. The full interview can be viewed on LEGO.com/gobeyond.

Watch for our full review of this set coming very soon, and check out the rest of the details below.

Click to see all the images

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Aye, there’s a castlehead for you

There’s trainheads and castleheads, but usually it’s meant to refer to fans of the various LEGO themes. However, here’s a build that takes it quite literally. Designed by Corvus Auriac, this 5,400-piece microscale model depicts a castle built on a rock that might be a little more alive than its builders suspected. It’s packed with lovely details from the dragon burninating the town to the tiny wizard tower sprouting out of the side of the castle’s tallest roof. Do yourself a favor and give this one a close look, as you’ll be rewarded with lots of clever parts usages. One of my favorites is also the one used most here: most of the trees are made from dark green minifigure epaulets stacked on each other.

Monkey see, monkey do bigger

I’ve seen giant LEGO pieces, and even upscaled fish and chickens, but I’ve never before seen a giant LEGO monkey, and this one from mybrickbuild has me tickled pink. The classic LEGO monkey was one of my favorite pieces in the original Pirates theme, this giant one makes me want to see a whole LEGO Pirates set built at this scale. It’s a digital render but it looks like it’s mostly buildable with real bricks, except for the 2×2 round bricks with Technic holes, which aren’t currently available in brown. The arms and curling tail are courtesy of the new curved 2×2 round piece that forms the trunk on the Bonsai Tree.

If you like seeing things made bigger with bricks, check out our upscaled LEGO archives!

Round and round she goes

TBB alumn Nannan Zhang has always had a penchant for fishing out the oddball pieces that clutter the bottom of most of our parts bins, and making something clean and elegant with them. This time he’s really found a true oddball, though, because the centerpieces of this spaceship are giant teal Duplo balls, sitting as what I presume are reactor spheres. The third sphere on the triangular ship is one of the clear tourist spheres from the Jurassic World sets. It all comes together neatly to make a delightfully alien ship design.

2021 BrickLink AFOL Designer Program to give new legs to 31 LEGO Ideas 10k-club designs [News]

Today BrickLink is revealing the second round of its AFOL Designer Program (ADP), which crowdfunds the creation of LEGO fan designs. 31 LEGO Ideas projects which reached 10,000 votes on that platform but were not selected to become Ideas sets have been ported over to the ADP where fans can choose to support them again. The projects range from a tiny aquarium to a fishing boat and a castle. Fans will be able to pre-order them in a Kickstarter-like process between June 1 and August 10. If they pass the crowdfunding goals on BrickLink, up to 13 of the sets may be produced. Unlike LEGO Ideas, the ADP will not substantially alter submitted models, so the final sets will be extremely close to the voted-on designs.

The first round of the AFOL Designer Program occurred in 2018 and solicited designs from the fan community to be turned into semi-official LEGO sets via a partnership between LEGO and BrickLink. (Check out our review of Löwenstein Castle from the ADP.) The LEGO Company subsequently purchased BrickLink in late 2019, and the newest round of the AFOL Designer Program is leveraging that connection to draw on LEGO’s own crowdsourcing platform LEGO Ideas for the new ADP designs. LEGO Ideas projects have a chance to become official LEGO sets, but must first receive 10,000 votes and then pass an internal review for product viability. As LEGO Ideas announced in December, for round two of the ADP, the company reached out to specific creators whose projects had passed the 10k mark but not the internal review, and invited them to participate in the ADP. LEGO says future rounds of the ADP may be open to submissions from all fans.

Read the full press release from LEGO below.

Continue reading →

Germany’s famous Aachen Cathedral in LEGO microscale

When construction began on the Aachen Cathedral around 796, its builders could hardly have imagined that someday it would be translated into a miniature LEGO version. But Jochen Haas done a beautiful job translating the final resting place of Charlemagne into bricks. When I first saw the large dome in the middle, I thought Jochen’s technique of using a series of curved slopes at intervals was an interesting effect, but left it with an unfortunate ribbed look. But apparently I’d forgotten what the real cathedral looks like, because a little quick research shows that the real dome is actually ribbed as well. In fact, the whole model feels as though it could be an official LEGO Architecture set–and if you want to build this one yourself, for once you’re in luck, because Jochen has actually created free instructions, though you’ll need to provide the parts yourself.

The puddle jumper

I have a fondness for tiny LEGO spaceships that have every piece neatly in place, and this micro “space-catamaran” by Christopher Hoffmann fits the bill perfectly. Christopher says he built it several years ago but is just now getting around to photographing it (a delay I empathize with on a deep level) but I’m glad he’s decided to show it off now. While he says the design focused around the then-new X-wing canopy, the part that sticks out to me the most are the large white Technic panels that form the wings, which are a cool-shaped piece that’s surprisingly difficult to integrate into minifigure-scale ships, though it blends in smoothly here.

A spider mech to give you the creepy-crawlies

LEGO spider mechs aren’t too uncommon, but most of the time they give the impression of a machine with a lot of legs–after all, that’s what they are. But this one by Joss Woodyard is enough to trigger an arachnophobe. OK, technically it’s based on a Harvestman (AKA daddy longlegs) which isn’t a spider. But it’s still an arachnid, and with all those eyes and creepy arms and dripping….something–shudder–it definitely counts in my book. The green bits on the legs are the Technic wire clip, which you may have seen a lot of around here lately, since it’s being used in the latest Iron Builder challenge.

Only the worthy can build this LEGO Thor’s Hammer

Truly, LEGO builder car_mp must be worthy, because this life-size version of Mjolnir, Thor’s Hammer, looks ready to demolish some dark elves or maybe just pin Thanos to the ground. Although it’s not a complex technique, the stacked brown and grey elements look great for the banded leather handle, while the smoothly tiled hammerhead itself seems to have the proper heft. Indeed, no doubt most of the 765-piece model’s complex building techniques are hidden deep within because it’s no small feat to get such a large weight to stay on the handle like that and not immediately fall off. The builder notes that it can be hefted, but does require some care.

LEGO launches Future Builders ad campaign for International Women’s Day 2021 [News]

Ever wanted to see your kid on that famous LEGO ad from 1981? Now you can, says the company, thanks to a new ad campaign. This coming Monday, March 8, is International Women’s Day, and to mark the occasion The LEGO Company is launching a new ad campaign focusing on young female builders. Based on LEGO’s iconic “What it is is beautiful” advertisement from 1981 featuring a young girl proudly holding her creation, the new campaign will let fans see themselves in a similar advertisement. While the campaign website isn’t live at the time of writing, LEGO says it will allow parents to submit images of their children holding their designs, along with a few keywords, and the website will then generate a unique poster based on the image that will be emailed back.

Click to read the full press release and see more example posters

The unknown horror

Sometimes you don’t have to understand exactly what you’re looking at to appreciate how awesome it is, and how well-built it is. This LEGO creation by Bart De Dobbelaer is called the Glarburg Horror, and I think it fits into that category. Bart’s written a short story on this Lovecraftian monstrosity, but I’m afraid I’m still no closer to figuring it out. Nevertheless, I like the repetitious use of elements on the “creature” to create an unnerving texture. Meanwhile, the broken stone columns have an almost technological feeling, while the whole scene is subtly overgrown with sickly black shoots made mostly of connected droid arms.

LEGO Ideas reveals 21326 Winnie the Pooh 1,200-piece set, bringing Pooh, Tigger, Eeyore, and more [News]

Today LEGO has revealed the latest set from its Ideas crowd-sourcing platform. 21326 Winnie the Pooh will feature the popular characters from A. A. Milne’s book series along with Pooh’s home under the tree in the Hundred Acre Wood, as interpreted by Disney. The set will include five characters: Pooh, Piglet, Tigger, Rabbit, and Eeyore. The 1,265-piece set is slated to be available for LEGO VIP members starting March 18 with general availability on April 1. It will retail for US $99.99 | CAN $139.99 | UK £89.99. Be sure to check back for our full, hands-on review of this set, which will be coming very soon.

The Winnie the Pooh project was created by fan Ben Alder in March of 2019, and hit the requisite 10,000 votes in July of that year. It was approved by LEGO in February of last year, joining the Medieval Blacksmith as the two projects from the first 2019 LEGO Ideas review to be turned into official sets.

Having a hard time keeping track of which LEGO Ideas projects are coming? The Winnie the Pooh set is the first to be revealed of the 8 approved projects we covered last month: Upcoming LEGO Ideas Projects.

Click to see more images and read the official press release