Tag Archives: LEGO MOC

This Spider-Man scene features some pretty massive spoilers…maybe.

The first trailer for Spider-Man: No Way Home made it pretty clear that Sony and Marvel are looking to double-down on the multiverse-hopping success of Into the Spider-Verse. Thanks to a spell cast by Dr. Strange, Tom Holland’s Peter Parker will be facing off against foes from previous Spider-Man film eras, including Alfred Molina’s Doc Ock from 2004’s Spider-Man 2. And if the villains from these different movies can show up in the MCU, you have to wonder, “Who else might be along for the ride?” It seems the worst kept secret in history is that this film will feature Tom Holland joined by Tobey Maguire and Andrew Garfield, each reprising their own version of the Web-slinger, for three times the wall-crawling action. Of course, that’s not confirmed. It might just be speculation. It could be that the internet rumor mill has gone haywire and is setting legions of Spider-Fans up for disappointment when Tom Holland is left to fight these villains all by his lonesome. If that’s the case, Ben Cossy has us covered with this delightful diorama that imagines what it might be like if all three Spider-Men went up against a Sinister Six composed of Electro, Mysterio, Green Goblin, Doctor Octopus, Kraven the Hunter, and Sandman.

I have to say, Kraven’s an interesting choice to round out the villain roster. He’s the one character in the line-up who hasn’t appeared in a live-action film as yet. Which doesn’t mean we won’t see him. But who would you cast?

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Vic Viper Firefighters

After a slightly long hiatus, I’m finally back with a build of my own. I’ve been working with The Brothers Brick since May, so some of you might be familiar with the name Chris Burden from my articles. But prior to joining the team, I was known mainly by my Instagram handle, @Benny_burd. It’s taken me a year to get to it but I finally have proper photos of my Vic Viper from last year. This fire-fighting craft is commonly seen in ports, responding to engine failures or collisions. These beefy platforms can provide support to the Coast Guard, Navy, and Orbital forces for rescue missions or forest fire suppression. Strong forks armed with water cannons extend out from a bulky body. Perched atop the main engine section, a break-away glider houses the main pilot of the vessel sandwiched between two more water cannons. The wings are adjustable for optimal atmospheric travel while fixed tailfins extend out above the engines.

Continue reading →

A peaceful floating temple in miniature

Floating islands are a popular inspiration for many LEGO builders, and it is easy to see why. They are mysterious and fantastical, and they can provide a great challenge to build them in a way that both supports the model and hides that support to enhance the magical appearance of the finished scene. Nathan Hake does a masterful job of using falling water to provide the support for this microscale floating island with a temple nestled between the trees.

Keep reading to see more

2049 Chevrolet Stingray Spinner

I love writing about other builders’ models, but it’s nice to remind our faithful readers that we’re builders too. Inspired by the iconic Spinners from Blade Runner, I decided to dismantle my Speed Champions Stingray and upgrade it with more futuristic elements. Retaining the color theme was a must, as I had to use the Stingray logo stickers. Thankfully I have a mess of dark red pieces to spare. The biggest challenges I had were building a sleek, swooshable body as well as finding a canopy structure that worked.

A very smooth Halloween cottage

Okay Halloween might be over but that is no reason not to post an amazing LEGO Halloween themed build. This creation by Jake Hansen sure is something else. It is completely studless (not counting the studs on the foliage). This makes this creation almost look like it is not made out of LEGO bricks. Not building on a base but placing each element loose on paper also helps. Jake uses some interesting techniques. There are treasure chest lids hidden in the tree trunks. The best part has to be that cute fence and the balcony made with umbrellas. There is a stash of pumpkins next to the house. If you look closely you’ll spot that the ones in the back are not orange but red. This creates more depth as they look like there’s a shadow cast upon them because they are further away. Very clever. Another clever technique has to be the tombstone made out of a 2×2 round tile with hole and bar holders with clips attached to the back of the round plate. The effect is amazing!

Salvaging the Speedorz wheel

Sometimes a build comes along that makes you scratch your head. Some parts are just obscure enough that they’re hard for everyone to recognize. Of course, builders like Daniel Church like to go the extra mile to use an element that might not technically be its own element. Such is the case of these bright blue wheels, salvaged from the housing of some Chima ripcord bases. These Blue Bombshells are the latest Hyperious Choppers. Wonderfully compact and brick-built, these motorcycles are the perfect addition to a futuristic or cyberpunk-style build. Those hubless wheels and greebly engine sections contrast nicely with the smooth, colorful upper bodies.

This LEGO Ornithopter from Dune 2021 has me all a-flutter

The brilliant (in my opinion) 2021 adaptation of Dune is finally out in theaters, and one of the most distinctive vehicles introduced in the Sci-fi epic is the flying ship known as the Ornithopter. ZiO Chao captures the details of this small craft perfectly. The book describes an insect-like multi-winged vessel that flies using a mechanical flapping motion but is also capable of jet-powered flight. Director Denis Villeneuve combined this inspiration with an Apache helicopter, so it is only fitting that ZiO used helicopter rotors for the wings.

Other details like the retractable ramp for boarding, and the landing gear that continue the insect vibe as they extend downward for landings. With photographic effects to add motion blur, you can almost hear the low whining thrum of the wing beats.

Good things come in small bottles

How many pieces does it take to build a good model? Not many at all, if you’ve got a little ingenuity and a good imagination. This tiny build by “Big Daddy” Nelson would make as good a desk display as the official LEGO Ideas 21313 Ship in a Bottle set, especially if your desk is spacially challenged like mine. In fact, I’d love to have a whole lineup of micro sets to display. The ship itself is made of fewer than 15 elements, and the bottle is around the same. Its design is made possible thanks to the new 4×4 half-sphere elements that debuted in 76391 Hogwarts Icons Collectors’ Edition a few months ago, which form both ends of the bottle.

Studded seas and sea studs

Here at The Brothers Brick we love smart building techniques. Our hearts start beating a little bit faster when we see a LEGO part used in a clever way. But clever and smart do not always mean complex. Andrea Lattanzio shows us that sometimes simple is the way to go with their 1×1 round plate sea.

While it’s not a new technique, using different colours to create waves is a real nice touch. Making the house in the same vibrant colour as the ocean is a nice way to draw attention away from the bright sea and towards the detailed little house. Plus the bright colour of the house highlights all the earth-toned details around the house. If the house was earth-toned too, those little details wouldn’t stand out as much as they do now. However, the simple studded sea is probably one of the only simple techniques used in this creation. Andrea also built a trabucco, which is an ancient fishing machine from the east coast of Italy. This build looks like it is defying gravity and I truly wonder how sturdy it is. It looks so fragile with those thin legs. I can’t help but wonder how many times the legs collapsed when Andra made alterations to the platform on top. Or maybe the legs were added as the final step to the build to prevent this from happening.

Soaring over Arrakis with House Atreides: Dune’s Ornithopter in LEGO

Denis Villeneuve’s Dune has quickly become a hit amongst fans and critics. The cinematography and soundtrack balance perfectly with the classic narrative to deliver a knock-out blockbuster that will last the ages. Much like Star Wars, Star Trek, and others, Dune features a plethora of cultures, planets, and religions. For me and other fans of LEGO, though, it’s the spacecraft and vehicles that really round it all out. The Ornithopters of Frank Herbert’s sci-fi classic have been a challenge for past projects but Denis Villeneuve’s design team produced a craft that will surely become iconic. When I saw this Ornithopter by TBB alumn Simon Liu, I had to know more. I talked with Simon about avoiding spoilers prior to opening night, his immediate need to build this beauty, and the challenges he faced with its final design.

Continue reading →

Scarlet Witch’s cabin is a build worth studying.

The end of Disney+’s WandaVision series finds Wanda Maximoff sitting on the porch of a remote cabin in the mountains. As a tea kettle whistles, she rises and goes inside to pour herself a drink and we see that inside the cabin is a second Wanda, this one in full Scarlet Witch attire, hovering in the air and using her powers to comb through ancient texts. No doubt she’s looking for answers to the questions the show raised. If this is a spoiler for you, I don’t know what to say. You’ve had eleven months to watch it. And Lego_nuts has spent one and a half of those eleven months creating a custom build inspired by Wanda’s quest for knowledge.

The cabin we see here is much larger than the one glimpsed in the show, but in a way that’s the perfect direction to take. Since the studying Scarlet Witch appears to be some sort of astral projection, I like to imagine this build represents the mystical library that Wanda is accessing. Standing multiple stories tall, this space is filled with books and artifacts in every possible corner. That, combined with its dramatic lighting, makes this a true marvel of scene setting. But you won’t need to study ancient texts to find out how he did it. Just have a look at the video below.

Peace and tranquility in the Ninjago City Temple

I’ll be honest with you, Ninjago was never really my cup of tea until LEGO produced the Ninjago City line. The best thing about these sets is builders like Wochenender using their imaginations and expanding their Ninjago Cities. This Ninjago City Temple is exactly what every Ninjago City inhabitant needs to get away from the busy city life. I love the use of different shades of plates underneath the trans light blue tiles to represent the depth of the water varying at places. A special mention needs to go out for the use of the candle to represent cattails. These water grass plants get the LEGO treatment quite often. Most of the time, a 1×1 round or a 1×1 cone part are used to represent the ‘corn dog’ looking flower. Seeing a different part fulfill this purpose is quite nice.