This LEGO castle tower creation by Roger Cageot is a fun exercise in creating round walls and combining muted and vibrant colors. I love the green color of the lake and the way the yellows are combined. The simple wooden drawbridge is a fun feature, and the morose tree adds a somber feeling to the creation. This could easily live in the world of the LEGO Ideas 21325 Medieval Blacksmith with its dilapidation, colors, and energy.
I am not a fan of big LEGO pieces. Not at all! But Thomas van Urk proves me wrong with this latest creation. Around the first story of this build are not one, not two, but three light grey 1x8x6 door frames with stone pattern and clips. I normally really dislike this piece because of the stone pattern, since LEGO never made ‘regular’ bricks to continue that particular pattern. The only part you can use to continue the stone pattern is this piece itself. So to me, they always stick out in a build. That is until now.
In this creation, the big doorframe works wonderfully, and to be honest it took me a while to notice they were even included. The big doorway is nearly the only part used to get the overall piece count of this build down, because otherwise it looks very part intensive. (The other one is the Brick 1 x 6 x 5 with Stone Wall Pattern which makes up the cobblestone walkway.) The roof of the building is stunning. I love all the bay windows sticking out, and the tower with the metal tip makes the roof look really intricate. And the tree next to the village house is a stunning beauty itself. At the base there are round axle connector blocks. After a while these transition into 2×2 round bricks and the occasional 2×2 round bricks with pin holes. Eventually those transition into round pin connectors. I am not sure how Thomas managed to connect the 2×2 round bricks to the pin connectors. Perhaps flower stems? What do you think?
Spring and fall. Life and death – and the cycle of rebirth. Always and forever Mother Nature will maintain a balance. This subtle yet beautiful LEGO tensegrity sculpture by TBB alum Nannan Zhang is a metaphor for that truth. Most of the sculptures we see have a single 2-chain/string feature. This one employs another chain to give it two distinct sides, like a scale. While it’s done very well here, you can also imagine a plethora of other possibilities for the technique. It’s probably unintentional, but knowing this accentuates the metaphor even more. Give that one a good think!
These builds were a huge hit this past year amongst builders. Take a moment to look back on all of the tensegrity creations we’ve featured, include one that is 3-tiered! Also, while you’re at it, you can check out Nannan’s other models.
Sometimes a LEGO creation makes you blink twice before you realize it is actually made out of LEGO bricks. It doesn’t have to be a big creation with complex building techniques, sometimes it can be something quite simple like this spray of plum blossoms made by ZiO Chao. It showcases the blossoms of a plum tree in different stages. When I say simple, I don’t mean to say that this is by any means an easy build. After staring at this picture for over 15 minutes, I still can’t figure out how the five petal flowers are put together. Could the base of the flower be a dish or maybe a steering wheel?
Nature has been manipulated by human hands for centuries. While certainly nature always finds a way, seemingly so do we humans. Simon Liu’s LEGO bonsai model which was entered into Brickset’s bonsai contest, inspires the philosophical mind to produce musings on the relationship between humankind and nature.
Simon’s model is visually striking and compositionally different from most bonsais I have seen so far. Instead of the tree growing out of the typical rectangular pot, this plant is growing out of the palm of a grey hand fashioned out of a number of small elements including 2×2 tiles, diamond shields, and ingots. The bonsai itself is shaped by a number of wiry black elements most notably the whip and twig pieces. The flowers featured on this build are rendered by baby minifigure heads – an unusual but effective choice. This handy bonsai rests on a sea of 1×2 trans-clear blue bricks, which was a nice touch. For whatever reason this model reminds me of the film WALL-E, with the robot’s little hand carrying the plant – the key to our planet.
Ever since the release of the LEGO 10281 Bonsai tree, there have been a lot of LEGO Bonsai trees appearing on my socials. I do not recall an official set ever-inspiring so many fans to create their own versions of (except for maybe the BrickHeadz). This one by Hoang Dang is the cherry on top of the cake. Not only does it come with a custom base and pot it also appears to be levitating, hence the title.
Let’s get straight to the tree which to me is te main highlight of this creation. There are so many cleverly used parts hidden in this creation. Hoang was also kind enough to post a break down of his creation, making my life as a writer a whole lot easier. For the trunk the following pieces were used: mammoth trunks, mammoth heads and a Scala horse saddle. I kid you not. There also is a lot of attention to detail when it comes to the flowers in the Bonsai tree. The flowers appear to have 3 stages. Starting as a small bud, which slowly opens until it is in full bloom.
Even been in one of those situations where a massive rover vehicle would do a lot better off-road than a minivan? I have, and I almost got stuck! Builder Andreas Lenander shows off the ride I should have been driving that day.
I love how untraditional this vehicle is compared to a normal LEGO car. The wheels are built from scratch, using angled bricks that really give off a rugged vibe. Looking closely you can see that the central spokes of the wheel rim are made from a pirate ship steering wheel! Incredible!
Also, the tree in the background is made up of brown whips wrapped around an antenna. Very clever.
Clearly, this thing can crag up any canyon and still come out without a scratch. I mean, would you want to mess up that sick paint job?
Spooky builds don’t have to be all black to get their point across. Anthony Wilson has created a LEGO-based human-tree hybrid called the Aortis Bloom that instead leans into the crimson side of the spectrum. The medically-inclined among us might not even find it creepy – the heart is just a biological necessity, after all. The twisting veins and arteries made from dinosaur tail elements may be a little disquieting, but they’re also very vital to good health. And the blood-red and dark-blue leaves suggest the flowing of oxygen through the system. I’m not sure what those little bits of “fruit” are supposed to represent, though. And just what is the tree sitting in? Dirt? Dried blood? And while really elegant looking, I think that table is actually evil, too. (Just trust me on that.)
If you’d like your October to be a bit more direct with the disquieting images, just take a scroll through our horror archives.
LEGO castle creations are often a brilliant display of how to build with gray bricks. And though I love big gray castles as much as the next LEGO fan (I’m even hoarding all kinds of gray bricks to build my own massive castle one day), I can also appreciate castle creations with a generous splash of colour, like Tobias Goldschalt has with his jester scene.
The trees are a brilliant adaptation of the one in front of the Bookshop modular building, and remind us in the real world that autumn I around the corner. If the bright colours aren’t enough, the jester is prancing along the road with his entourage in tow, bringing cheer to the local peasantry. Dancing to the sound of a drum and guitar, as he moves on to his next location along with his wagon full of props.
I’m old enough to remember when things were simpler, and LEGO Tensegrity builds were all the rage. This sculpture from Bendrig evokes the calm and peaceful state of a nearly forgotten age. Arch bricks and curved slopes create an organic trunk, and there’s just the right amount of foliage. I also like the simplicity of the two-tone base where a layer of loose 1×1 round plate makes for a nice zen-garden feel.
It’s nice just to take a break and ponder the natural levitation of this sculpture. Maybe one day more things will be in balance like this.
You’ve heard of treehouses. Now Aukbricks presents something that is a tree…in a house. This LEGO creation is like a childhood dream, a four-story modern home that surrounds a tree. The inspiration is a concept by A. Masow Architects. Incidentally, this LEGO creation and its real-life counterpart are both renders that don’t exist in real form but AuKbricks tells us he used about 4500 bricks, all of them utilizing real colors and legal connections.
Call it fate, call it karma, call it luck…whatever name you hang on it, destiny is a force to be reckoned with. And while it can be a scary thing, it can also be beautiful. I mean, just look at First Order LEGO‘s Hand Of Destiny. This monochromatic vision in bluish-grey LEGO may not evoke feelings of giddiness, but it still is a lovely thing to behold.
There are a lot of great textures in play in the base and fingers, but to me the real star of this build is the tree’s foliage. Those are hundreds of 8mm wheel rims. If you look very closely, you can see that they’re attached using various 1×1 clip plates. There has to be some very interesting architectural support hiding under those rims, too.
I’m always struggling to find good uses for all the LEGO wheels that accumulate in my parts bins. Maybe the techniques in play here can help inspire some creations of my own. And if not, that’s got to be the case for some other builder. Destiny demands it!
