Category Archives: Models

This is what we’re all about. We scour the web for the best custom LEGO models to share with you. From castles and spaceships to planes, trains, and automobiles, you’ll find the best LEGO creations from builders all over the world right here on The Brothers Brick.

An interesting take on the ornithopter from Dune

Now that the world has finally seen the release of Denis Villenueve’s adaptation of the classic novel Dune by Frank Herbert, many LEGO builders have taken inspiration from the movie and the original source material, using desert power to fuel their imagination. One of the most interesting vehicles in the story is the small patrol craft known as ornithopters, or ‘thopters, which are described as looking a bit like a dragonfly, with two sets of wings that can either flap or retract for jet-powered flight. Alpha Bernini‘s version of the four-winged craft may look a bit unconventional, but there are many interesting details of note. First, the angled cockpit with its transparent blue canopy really picks \up the insect vibe, paired with the small Mixels jointed legs.

The long scaffolding part used for the tail further resembles the extended abdomen of the dragonfly. Seen from the side, with the wings folded back, the cockpit also includes storage space below the pilot’s chair.

Be sure to check out our other Dune-inspired ornithopters featured recently.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO fun in the summer sun

Up here in the Pacific Northwest, it’s that dreary time of year. It’s a gorgeous place to live, but gloomy, bone-chilling rain continues for weeks at a time, making even those who love rain crave the sunshine. I can’t wait for summer, and this adorable LEGO sand castle is a cheerful reminder of what’s to come. Built by fellow Seattleite Peter Zieske, it uses clever angles to give it that classic shape.

I’m a big fan of this playful creation, which includes an excellent shovel and a colorful spinning pinwheel. (Yes, it’s actually motorized to spin!) But this isn’t even my most favorite build from Peter! While you’re here, take a look at his awesome record player and adorable wind-up penguin!

It’s Mario Mosaic time!

John Kupitz has created this incredible build of everyone’s favourite plumber, Mario. A wide range of pieces are used in this model’s construction, from a baguette to a scorpion and even a rabbit in the M logo at the hat. On the right side of the face, a monkey is cleverly hidden and represents part of the hair, while there is a Mario printed piece, from the NES set, at the ear. The photo of this mosaic has been taken at just the right angle so that all the parts blend to form this stunning display.

Three cheers for brick-built backgrounds! Ra! Ra! Ra!

I always say it, there are just not enough Stargate builds out there. That seems to be changing more and more, as seen here with this vignette by Builder Douglas Hughes. Somewhat of a double hitter for references, this model follows in the style of our 2021 Creation of the Year with its own distinct character. Capturing some Stargate history, Douglas imagined the false god moving into his new apartments. A Cheops class warship shoots a matter stream down into the Great Pyramids of Giza as the sun sets behind it, the Nile alight with a red glare. Clever building techniques and color-blocking create a gradient that effectively emulates the dulling brightness of the setting sun. The use of black bricks for the pyramids and ship is a great way to achieve the silhouette effect. The translucent red river is my favorite part though, as it’s a perfect way to capture the depth of field with an added layer of realism.

This is a great example of the power models like this have and Douglas did a fantastic job with its color and layout. Maybe 2022 will bring us more of these delightful vignettes in addition to more Stargate love. Whatever it brings, I hope its not a bunch of Goa’uld in a Cheops.

The clouds make for a lonely home.

Daniel Cloward is no stranger to builds with a storybook sensibility. But his latest creation is one of the most impactful pieces of LEGO storytelling we’ve seen. This ramshackle space is the cloud-based home of a pilot who needs to fix his airplane so he can return down to the world he’s left behind. But the pilot can’t bear to face the people below that he has wronged, and so his plane sits broken and incomplete, as does his life.

There are so many details in this space that speak to the lonely pilot’s state of mind – the pictures of old friends on the wall, maps of places once explored. And there’s a ton of great technique at work here: the arching entrance way, the blend of bars and tiles in the floor, the use of forced perspective. The genesis of this build was an Iron Builder round with antenna base and handle pieces as the seed part. They may not be immediately obvious, but there are plenty of them buried in this build. Try and pick them all out.

So it begins...a new year and a new Iron Forge

LEGO builder Francis Wiemelt has aptly named this piece So it begins. This is apt because it is a new year and this is Francis’ first entry into the first Iron Forge competition of 2022. That’s a lot of firsts! He goes on to tell us that the seed part is a lever (base or antennae), used here twenty-three times in the Uruk-hai army, and eight times in the fortress itself. Iron Forge competitions mean frantic building and stress for a chosen few intrepid builders, constant entertainment for you, and job security for us. Kinda like The Hunger Games. Good luck, Francis Wiemelt and may the odds be ever in our favor…or something.

The isle of magic

If I were searching for an island of magic like the explorer in this LEGO vignette by Josh, I’d be pretty excited when I saw this. Josh doesn’t provide us any further details on the specifics, but this mysterious island is flowing with lava and surrounded by a steaming sea. At the center lies some sort of magical cauldron. Note the subtle gradient beneath the transparent light blue tiles, giving the water a sense of depth.

Introducing the 2049 Chevy Corvette

The original Blade Runner movie (which was set in 2019) introduced us to flying cars known as Spinners. Obviously, here in 2022, our cars are still grounded, but Sérgio Batista gives us a glimpse of what could be if modern automobiles had such technology. Using the Chevrolet Corvette C8.R from set 76903 as a starting point, Sérgio has created a perfect blend of modern automotive styling and futuristic hover technology. Sure would be nice if we could take this bad boy for a spin. But, who knows, maybe by the Blade Runner sequel date of 2049…

Yo dawg, I heard you like trains

Railways aren’t all built alike, and that’s what allows Pieter Post to create this awesome bit of recursion in a LEGO diorama. The green engine is a narrow-gauge steam engine, allowing it to be transported on a standard-gauge flatcar. The engine and flatcar both are magnificent, with lots of details that are so cleanly sculpted they blend in, even down to the wood-slatted structure on the back of the flat—a structure whose purpose escapes me. I also love that Pieter hasn’t simply shown the pair on a straight piece of track, but instead took the time to sculpt a small diorama. The uneven edges add a great deal of visual interest and give the scene a feeling of being part of something much larger.

The spineless worm got what he deserved

Most of the time, when a lone warrior faces off against a dragon—well, it doesn’t end so well for the warrior. Not so with this strong and stalwart fellow by Dan Ko, who looks like he got the better of this fell beast without breaking a sweat. This small-scale build has some mighty sweet part usage, from the brow of the dragon’s head made from the front part of a mech torso to the long and twisted spine made from robot arms and teeth. But I think my favorite part has got to be the large beard made from the hair of a Minifig.

Radon-86 gets glowing reviews

Part of the thrill in buying LEGO’s Collectable Minifigures is what builders do with them after they’ve unpackaged them. Yuri Badiner has taken the yellow robot from Series 22 and has given it a job involving radiation that the rest of us wouldn’t want to do. This is nicely built however, the real star here (besides the happy little bot) is Yuri’s exemplary photography. The tilt of the horizon is a neat trick they teach us in art school that can denote tension and danger. Clearly, this is a dangerous environment but this bot seems happy to do it. The way the composition is lit here also gets glowing reviews from us. Yuri is no stranger to good photography and getting his minifigures into hairy situations. Click the link to see what I mean.

Ready to race? This speeder from the Mandalorian sure is!

Jared Reisweber has created this fascinating model based on Cobb Vanth’s speeder as featured in The Mandalorian Tv series. The vehicle has an interesting design as it is made out of a podracer engine with the addition of a seat and controls for the pilot. The technical details such as the odd piping, wires and cables creates the impression that the speeder has been cobbled together out of scraps and spare parts.

From the back, there are even more intricacies such as the large wheel which forms the back thruster and the gears which might represent some of the turbines of the engine. The splayed out foot pedals are also a nice touch and demonstrates Jared’s attention to detail throughout the build.