Category Archives: Models

This is what we’re all about. We scour the web for the best custom LEGO models to share with you. From castles and spaceships to planes, trains, and automobiles, you’ll find the best LEGO creations from builders all over the world right here on The Brothers Brick.

When you see a serpent

I don’t know about you, but I like my placid meadow villages free of marauding sea serpents. However, the folks were not so lucky at this fine farm by LEGO builder Faëbricks. The dark water looks ominous rather than tranquil, and the sand-green serpent rears his head in a pose that might be an easter egg for LEGOLand’s Brickley. As for the whole scene, I don’t know whether this builder was inspired by Valheim, but this moment seems to be drawn straight out of one of my games, from right after my boat got wrecked by a serpent and I’m swimming furiously to shore hoping my stamina holds out.

Le serpent géant du lac de l'ombre

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Why did the chicken walker cross the road?

Every time you think you’ve seen the best LEGO version of a Star Wars vehicle, someone turns around and makes something else incredible. This awesome AT-ST by GolPlaysWithLego utilizes a combination of LEGO and a sprinkling of other brand elements (mostly wedge tiles), along with a whole lot of skill, to raise the bar yet again (in fact, we featured their previous AT-ST version in 2019). The shaping of the gangly mech is spot-on, but it’s the posing with the uneven terrain that really sells this one to me. It’s almost shocking how much adding a good base to a build can improve it, especially a simple and clean design like this one.

AT-ST LEGO MOC v4.5

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This bowed ship cuts through space like an arrow

Another SHIPtember LEGO spaceship blasts its way through space! The bows from the Horizon game series serves as -soccerkid6‘s inspiration for this piercing craft. It comes in at 104 studs in length (or should we say height?) and weighs just over 3 pounds—the weight of such fine design! It’s nearly impossible to miss the bow influence in the design with the bend and curving bits at the top and bottom. Where an arrow could nock on a bow rests the central engine and the pointing bridge, giving a clue that it’s a microscale ship. I like the color choices of the build, with that yellow drawing you in to the middle with the teal highlights to balance it all out. The details of the ship stand out and work well together, allowing us to fully appreciate the look and feel of the clever craft.

Project Azarel

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The Hells Angels set the stage in this massive moving WWI diorama

With the exception of the past couple of years, I’ve been a staple at BrickCon in Seattle since 2005 or so. This year, I wasn’t a registrant but snuck in unnoticed (almost). While there, I was treated to this wonderous LEGO stage show put on by Douglas Hughes. The table presence of this massive creation was quite impressive, even with the curtains closed. But as the curtains parted, the intro music started and the real show began! As described by the builder, “As the curtains part you can see biplanes circling both above and below the zeppelin which maneuvers up and down.The soundtrack transitions to biplane maneuver and machine gun noises, and a red biplane swoops to the center stage from behind a cloud, gently rocking back and forth. Soon enough the red plane sidles back behind cloud cover and the finale begins to unfold – a little biplane corkscrews down in an uncontrolled dive until it hits the zeppelin.” He goes on to say; “Red lights flash, explosions rock the air, and the zeppelin slowly breaks apart revealing smoke and fire rising from within. The curtains begin to close and the finale fanfare plays – the show is over!”

Hells Angels

I guess you had to have been there. No, seriously, you had to have been there! The builder hasn’t provided a video of this beast on motion just yet but I can attest that this was an amazing work of art. I didn’t stick around long enough to find out, but this had to have won one of the top prizes, I’m sure. Chime in in the comments to let us know what awards this won or just to tell us what you think.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A flying purple people eater

HBO’s House of Dragons has nothing on Dan Ko. Dan has crafted an adorable dragon rider as part of the yearly Creations for Charity fundraiser. Both the rider and the dragon have short limbs that extend from big cylindrical pieces for the torsos, almost like a couple of fantasy corgis. We’d be delighted to catch a glimpse of this duo flying overhead.

Dragon Rider

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A delicious drumstick tower

Ben Spector thought he could hide LEGO turkey drumsticks in the tower roof of this lovely build and get away with it. Well, this is surely not the case because we did notice this clever part usage. But that is not the only smartly used part. We get ice cream scoops used as smoke and cheese slopes representing stained glass windows. Since LEGO will probably never release non-licensed castle sets with skin-toned Minifigures, I always navigate towards creations that do match these criteria. One of the best things about this creation has to be the base of the tower which grows wider and wider until it is wide enough to support a full-blown tower on the first floor. Chapeau!

Dragon Scale Inn

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

An Ewok Village redo and redemption

A LEGO builder who goes by the name of Simulterious tells us that they took apart the Ewok Village 10236 set and regretted it. Yeah, we know all about regret here at TBB, don’t we? Wait, what the hell does that mean? Anyway, they turned their regret into a redo and redemption of sorts by building a new version depicting what the set could look like today. I’m enjoying the use of shields as sort of a thatched roof design and the diversity of leaves is a welcome change from the old set. This builder also rectifies the obvious omission of the AT-ST from the original. Even though there seem to be slightly fewer Minifigures (that are visible, anyway) this would be an insta-buy for me if this were a real set. While we most certainly have our regrets, (wait, that again?) showcasing this builder’s work isn’t among them. Check out our Simulterious archives to see what I mean.

Ewok Village

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Sail towards the kings and queens of the butterfly collectors

What do you get if you cross the hobbies of LEGO, butterfly collecting, and impossible bottles? It might well look something like this creation by Gayle Spiller. It is inspired by a surrealist painting, although I’m reminded of the Jam, which is paraphrased in the title of this post. It’s a superb execution with some unique solutions for the patterns on the butterfly wings. There are croissants, eyes, sausages, pies, and even guitars in there! The ship itself is beautifully sculpted as well, with the exaggerated curves matching the surrealist tone of the piece.

The Winged Ship

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This LEGO parade really floats our boat!

Big Easy Bricks has crafted a pair of wonderful parade floats that make me yearn for a big old LEGO-themed parade. Both feature some classic LEGO themes and some great microscale building! First up is a fan favourite – Classic Space. The float features two iconic space sets in the form of the Galaxy Explorer and Monorail Transport System. The trailer itself also has a rocket blasting away from the Earth and Moon, made up of a mere nine pieces!

Float 01 - Classic Space

Float number two is a bit more rootin’-tootin’, as it depicts the perhaps niche (although no less legendary) Fort Legoredo from the 90s Western theme. This time we have some miniature soldiers and cavalry to man the fort, which is a superb imitation of the original set. Take note of the miniature cannons as well! Once again the trailer captures the Western aesthetic with some stars and horns. It’s a simple touch, but a really wonderful way to tie it together.

Float 02 - Fort Legoredo

I hope Big Easy Bricks have got some more floats lined up. There’s plenty of classic themes, and they would look great on parade together!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

It’s Hammertime for this Mech

Moko brings us another offering of his Animal LEGO Mech collection, this time with the Hammerhead Shark kitted out and ready to deliver the Hammer blow! The design of this build certainly emphasises the heavy armour of the Mech and the colour palette accentuates that militaristic vibe. Even within the heavy armour, there are some nice flourishes of design – from the Battle Droid Torso’s found in the ankle mechanism through to the technic construction briefly glimpsed in the arms.

Shark's Exo-suit "Big hands"

But let’s not forget the Mech’s weapon, the Warhammer reveals it’s own bite which is expertly hidden away ready to add a powerful bite to any adversary they encounter. But that Hammerheads grin – toothy!

Shark's Exo-suit "Big hands"

We’ve all been there, those two LEGO plates that need that additional pressure to stick together. Have no fear, this little Sharknado in a Mech suit is here to help!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

One Kooky Covenant

Throwing a Classic Space twist onto a concept design from Alien: Covenant sure is one way to do SHIPtember. Flickr Builder Space Kook brought their A-game this September with at least five different ships over 100-studs, either in length, width, or height. Jumping around between scales, Space Kook drew inspiration for their fourth build, the LSS Covenant. Taking design cues from early concept art of the USCSS Covenant Colony ship from the Alien movie, large solar panels flare out at the rear of the ship. Progressing further up the body, past the cargo holds, you’ll see a little fighter or drop ship peaking over the main hull of the colony vessel. Decked out in blue and yellow with white and black accents, the choice to craft this ship in Classic Space regalia allowed Space Kook a plethora of parts and design cues. Between the two references, it’s no wonder this creation has such a satisfying bow. The bumble bee stripes and yellow view screen complete the Classic Space homage while sensor arrays and directional boosters grab the eyes as satisfyingly accurate greebling.

Shiptember 2022, The LSS Covenant

This builder really went the extra mile during SHIPtember to accomplish the Herculean task of building not just one, but five massive 100-stud vessels. The techniques and parts used show off  Space Kook’s ingenuity with the process across all five and it’s definitely worth checking out the other four ships that they created this year.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A silky frigate for those deep space patrols

Builder Red Spacecat serves up a silky smooth LEGO frigate for SHIPtember. Coming in at a length of 120 studs, this ship possesses the curves of a luxury liner and the firepower of a deep space frigate. The ship retains lovely definition for each section, despite having mostly white pieces. This allows the colors of the details to really pop and stand out, especially the black details against the stark white body. I particularly love the engine wings with their colorful banding and slick design. And check out that tower at the ship’s rear center–it has nice shaping and parts usage. Overall, I’d say this frigate wins both space battles and battles of style. It’s a great display piece and awesome design for a spaceship, no doubt in my mind.

Frigate

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.