Posts by Theo Spencer

A seaside dwelling perfect for hermits and crabs

Josh (Sergeant Chipmunk) seems to be going on a bit of a waterside-abode-with-trees-growing-out-the-top kick lately. After his magical-looking tree house, we have another one in slightly rougher waters. Speaking of which, the way the waves are done here is really neat – it certainly gives the impression of a wind-swept rock by the sea. Such a house could surely only be lived in by a grizzly retired sea captain, right? No doubt they have come here for some peace and quiet after a busy life braving the high seas. They just need to contend with the local wildlife. How many different critters can you spot kicking about?

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This turtle is hard on the outside, slightly less hard on the inside

You say LEGO mecha animals, all I hear is Mitsuru Nikaido. Few builders have such a remarkably consistent style across so many builds. Some of my favourites in this series are deep-sea creatures; something about the exoskeletal style just really works for marine life. The venerable sea turtle is latest to be added to the menagerie. The white shell really pops against the dark grey of the turtle’s mechanical innards. Some of Nikaido-san’s creatures feature white heads to draw the attention that way, but in this instance I think the grey is a better choice. It emphasises the difference between the hard shell and the soft tissue underneath. Well, as soft as a mechanical turtle can be, anyway.

As far as the living dead go, I think I prefer zombies

Can someone tell Park Seung Hun (Buffoon) that Hallowe’en isn’t for another 9 months yet? They’ve crafted this LEGO graveyard creature to haunt our dreams. And I don’t mean a creature that hangs out in graveyards, I mean it is literally a creature made from a grave. It’s a frightening new take on the ‘living dead’ trope. Clearly the grave-digger didn’t dig this one deep enough. Mind you, it has uprooted a tree (which makes good use of Chewbacca’s bicep for roots, incidentally) in the process of leaving the ground. So perhaps a simple grave was never going to be enough to contain this beast.

This enormous LEGO dragline excavator model is nearly 6 feet long and includes 9 motors

With small LEGO builds, it often takes ingenuity to make for an impressive creation. We are of course partial to these builds, but sometimes nothing beats the brute force of a gigantic, multi-thousand (if not tens of thousands) piece build. It’s hard to tell, but I think Beat Felber‘s colossus falls into the latter category. Just. Don’t you think?

This isn’t a new build: Beat first uploaded a video of its operation a couple of years ago, which we’ll get to in a moment. But he has now uploaded a host of pictures of every nook and cranny on this P&H 2355 dragline excavator. Which is the perfect excuse for us to cover it in some more detail!

Continue reading →

The fragile beauty of microscale LEGO spaceships

I have reason to suspect our very own Mansur Soeleman must be a wizard. Why? Well, look at his latest LEGO creation. Not only is it a super rendition of Spike Siegel’s Swordfish II from Cowboy Bebop, it looks to be held together with magic. I’d be worried about breathing near this for fear of something falling off. There are so many pieces that look like they’re barely hanging on to each other, but it works so well! And what pieces they are, all in such a tiny package. Wheel arches, the venerable sausage piece, a rubber ring and of course, the sword at the front. Well, it is known canonically as the Swordfish II, so there had to be one in there somewhere, right?

This Star Wars ship sets a new standard for LEGO Jedi Masters

I’ve been eagerly waiting for Instagram user TWP (@nl_twp) to complete his latest model, and it’s finally ready! While the Eta-2 Actis interceptor has been the subject of many a LEGO build, this has to be one of the best ones out there. The way all the angles match up is just sumptuous! One of TWP’s goals with this build was to incorporate a full Astromech body into the wing (something which even in the movies requires some considerable suspension of disbelief). The use of an arch piece is wonderfully integrated and works perfectly for this very purpose. Over 200 hours went into this and the thought really shows!

I encourage you to go and check out all the details – there’s a surprising amount to pore over, given the modest size of the ship. But to whet your appetite here’s a shot of the opening and fully detailed cockpit in its landed configuration. I love the use of the transparent minifigure stands for the head-up display!

Never has a choppy sea looked so good in LEGO

Emulating nature in LEGO bricks can be tricky, particularly capturing the fluidity of water. Enter Huynh Khang and Ky Duy Phong, with some of the best brick-built water I’ve ever seen. It looks like it could be a painting in a gallery! A whopping 50,000 bricks were used to create this diorama, and not a single one has gone to waste. Tile pieces are used for the calmer bits of the sea, with clear and white studded plates used to represent the choppier parts of the water. The result is an incredibly dynamic ocean, which looks like a challenge for even the toughest sailors. Speaking of sailors, don’t let the waves overshadow the pirate ship – it’s just as impressive, using Bionicle pieces among other things to create detailed woodwork. To complete the roundup of LEGO Systems in this piece, we have a Duplo shark. It speaks to the magnitude of this piece that it doesn’t look at all out of place!

That’s one way to sharpen your skills as a builder

Builder Justus M. has really put his latest LEGO creation to the sword. Or rather, he’s put the sword to his latest LEGO creation! Quite a lot of swords, in fact. The build is a quaint little tabletop diorama of a junk ship being chased by a sea dragon. The swords are used everywhere: in the detailing for the ship, as part of the dragon’s headdress and on its back, and – most cleverly of all – as the stands. It’s these golden blades used as feet, along with the compass in the middle, that give this build an air of something more than just a cool LEGO build. It looks designed to be on display. Perhaps it would take pride of place on someone’s mantelpiece, in much the same way some real swords do.

Prepare thyself to be school’d, mediaeval style!

You know what we don’t see a lot of in LEGO castles? Monks and monasteries. Which, given their importance in the Western medieval world, is a shame, even if knights and castles are more exciting. Thankfully Ben Smith is on hand to scratch that scholarly itch. Ben is clearly a learned man when it comes to wall texturing. There’s a huge variety of tiled parts on show in the weathered walls, giving it a mix between graceful architecture and the reality of what time does to buildings. I like how the bust above the doorway makes use of a forestman’s hat (a part closely associated with LEGO castle folklore, of course) in grey, as a shield. Very meta.

Look at this terrifying LEGO deer. Or, on second thought, don’t

A lot has changed since the Black Falcons first appeared in LEGO canon. There have been a lot of new parts introduced, and minifigures have become a lot more expressive. Both are ably demonstrated by Ids de Jong here. The terrified faces combined with those helmets give a definite Monty Python “run away! run away!” vibe. And they’re right to be bricking it: Ids has created something rather unsettling called a Hirska. No big deal, just an all-seeing, oversized deer that apparently doesn’t take kindly to being looked at the wrong way. Or being looked at at all, for that matter. You know what, why don’t we all admire the quaint tree and rockwork instead? I don’t fancy adding ‘running scared from a deer demi-God’ to my personal repertoire of facial expressions any time soon…

Majisto’s Tower updated in majestic style

Hot on the heels of the last classic 1990s LEGO Castle revamp we featured, comes John Tooker with this mega re-imagining of 1906 Majisto’s Tower. Released only in North America, the original set featured just 195 pieces. John has used a little more than that to recreate some of the set’s key features in stunning detail! The printed dragon motifs are now brick-built from gold bricks and look great. The brickwork has been given a similar treatment. This might be my favourite bit, as it’s done so well that the original printed wall pieces can be used and blend in seamlessly with the new techniques. These aren’t the only pieces to be re-used, though. The flag, horse’s cowl, and the cart wings all carry over some of the set’s charm without appearing out of place. Same goes for the minifigures. Now that’s some wizardry Majisto would be proud of!

Looking to the past for inspiration in the future

Tino Poutiainen has drawn inspiration from the world of racing motorcycles for his latest LEGO creation. He says the all-conquering Honda NSR500 was the inspiration for the bike, and there’s certainly a resemblance. That is to say, it looks awesome!

There’s some very nifty parts use within. The front wheel is held in by a technic disc itself fitted into a basketball hoop, which frankly looks made for this purpose. The minifigure pulley brake lever is cool too. Although the original motorcycle was conceived in the 1980s, Tino has updated it for a slightly more futuristic age, perfectly illustrated by the figure stood next to it. Presumably this is what stylish motorcycle leathers will look like in a few decades’ time. I hope there’s a helmet just out of shot, or in that briefcase. Even the future is no excuse not to be road-safe!