Tag Archives: Vehicles

LEGO planes, trains, and automobiles! Well, maybe not trains, since they don’t like to play with the other LEGO themes, but here you’ll find all our favorite cars, buses, boats, ships, helicopters, and anything else with an engine (and some without).

Taiwanese LEGO fan uses 15000 bricks to build 4½ foot long SHIELD Helicarrier

The most anticipated LEGO set of 2015 was the enormous Avengers SHIELD Helicarrier. As we highlighted in our extensive video review, there was a lot to like about that set, except for the relative scales of the carrier, the microfigs, and the quinjets. And while some builders have explored more ambitious LEGO Helicarrier designs within the confines of a computer screen, no-one has dared tackle the challenge of building a more properly scaled and movie-accurate version of the Avengers’ flying fortress using actual LEGO bricks …until now!

Working with nothing more than reference photos from the 2012 Avengers movie, Taiwanese builder ZiO Chao and a his friends Dada, Kimura, Kuan-Wei, Stephanie, Tiger and Will from the Formosa LEGO club spent a month and a half (and many sleepless nights) constructing this enormous and fully detailed model of the iconic Helicarrier. At 140cm x 80cm it’s twice the size of the official LEGO set, and contains five times as many pieces. At last, those “swooshable” little quinjets now actually have room to move around!

Regarding the build process, which he photographed in great detail, ZiO told The Brothers Brick: “Before I started to build it, the most annoying thing was collecting parts and classifying them. Then we used Technic beams to sketch out the skeleton of the carrier, which needed to be strong enough to hold everything together. Technic beams were also a great solution for the supporting yellow columns, the front of the carrier, and the four turbine engines.”

Click here to keep reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Buggy class exploratory vehicle

FebRovery‘s come early this year! Ilya T.’s greyscale rover is just the thing to kick off twenty-nine days of rover-fueled madness. (That’s right everyone, 2016 is a leap year! So why not use your extra day to build a rover of your own?) I love the tight construction inside the small bubble-cockpit, the conical rear end, and the pop of color from the spaceman’s red suit. But the real selling point of Ilya’s build are those fantastic heptagonal wheels.

Koenigseggisseggggnignigsegigisegggnigseggniggsegg

legolover22 brings us another fantastic car build, and this time it’s the Swedish supercar, the Koenigsegg. Looking at an actual car, I’m very surprised this build was pulled off so well at this scale. If you’re a petrol head, you’ll immediately recognize this one.

Looks good from the back too.

10 golden doubloons to the first person to understand the title.

This will get you through the blizzard

It’s no secret that Ice Planet is my favourite Space subtheme, so when I saw this “Elephant” transport vehicle from Kirill, I knew I was going to have a good time.

There’s a lot more to this behemoth than ample use of large Technic parts to create a very solid hull. As the creator explains, inspiration came from the new Nexo Knights theme and all its new parts, which borrow heavily from the Ice Planet livery.

But, what you may not have guessed, is that this build is entirely motorized and able to traverse actual snow and ice:

(EDIT: An earlier version of this post mis-attributed the photo and the builder’s name. We contacted the real builder and confirmed who actually built this excellent vehicle. We take proper attribution very seriously. Our apologies to the builder and our readers for getting the attribution wrong on this one.)

LEGO Technic 42056 Porsche & other Technic sets revealed at Nuremburg toy show [News]

Thanks to flickr user Jim van Gulik, we now have photos of several of LEGO’s newest big Technic sets (see the others after the jump). We can’t confirm the precise set name yet, but it’s set number 42056, and is a Porsche 911 wrapped in zebra test patterns (used by auto manufacturers to disguise the outlines of an unreleased vehicle). Some sources say that the test pattern will not be included in the final model, though. You can bet that this will be an expensive set, clocking in well over $100 USD.(Update: You can now read our review of the Porsche 911 GT3 RS.)

HobbyMedia brings us this 360 view, as well:

Click through to see more new sets

Three wheels are just right – a Morgan 3 Wheeler in LEGO

If a bike has too few wheels and a car just has too many, may we suggest this recreation of a Morgan 3 Wheeler from Jonas who chose this tripod because “most four wheeled vehicles are already done in a perfect way.”

While I could argue that point, I can’t argue how cool this little build is. My favourite part must be the chassis which is so solid in construction that it looks like a single piece. Oh, and LEGO’s dark green makes a perfect hue of British racing green.

It needs suspension work and shocks, brakes, brake pads, lining ...

Back in 2013, quite a while before the LEGO Cuusoo/Ideas Ecto-1 was unveiled, I built my own version of this movie classic. For many LEGO builders, including yours truly, a model is never quite finished. I am happy with it when I build it, but if the model is still around a few years later, my fingers sometimes start to itch to make a few improvements. LEGO keep making new and useful parts and I may pick up a few new tricks along the way. My Ecto-1 looked as though it could do with a bit of work.

This turned out to be pretty extensive. The roof, some of the interior equipment and the rear end are mostly unchanged, but everything else is new. I was never too happy that the sides of the car from the Ideas set had a nicer shape than those on my model, but using cheese slopes and various brackets, I was able to make them much more rounded. This meant rebuilding the chassis and fitting new door handles and involved a lot of tinkering to ensure that the red from the fins continues along the bottom of the windows. The front was completely overhauled, with new 1×2 curved slopes used for the edge of the hood and a completely rebuilt radiator, with new jumper plates, that allow a stud to be stuck in the middle from below, used for the half-stud offsets. The windows have been partially tinted and I’ve even fitted new hubcaps.

Good to go for another few years!

An impressive tribute to a legendary rally team

I bet you’ve heard about the Kamaz Master Rally Team, especially in connection with the globally known Paris–Dakar Rally. The team retained the title for the last four years straight. Unfortunately, this year the international crew of Iveco PowerStar was a little bit more skillful and lucky. Still, that doesn’t hold Silva Vasil back from praising the Russian team and their outstanding results.

Silva, being a professional graphic designer, focused not only on the bodywork of the truck, but also on the chassis — and he absolutely nailed it. It’s quite hard to believe, but the truck is fully motorized, driven by 1, 2 or even 4 Power Functions motors depending on the type of chassis. No wonder the whole project took the builder about a year to complete. Go and take a look from various angles – it’s absolutely worth it.

LEGO Concorde cuts away from the runway as 65,000 bricks take flight

LEGO Certified Professional Ryan McNaught has been busy unveiling some fantastic new creations at Brickvention Australia. We showcased his incredible LEGO minifig-scale 120,000-brick sinking Titanic, and now we take to the skies with LEGO Concorde.

Ryan has chosen to build the iconic supersonic aircraft Concorde in miniland-scale. Building Concorde in LEGO is cool, but it’s only when you see the other side of the build that the really impressive details emerge.

While one side shows the complete aircraft, the other is an ingenious cutaway view that shows a slice through Concorde.

Click through for more photos of this huge airplane!

Delivering peace and order by force

Inspired by the abundance of awesome sci-fi vehicles in James Cameron’s Avatar, Marius Herrmann constructed the AT-99 “Scorpion” Gunship from the film. The whole build looks as true to the film’s AT-99 as can be built from LEGO; from the massive iconic rotors, to the fuselage shape, and even the overkill payload.

The gunship model appears menacing from all angles; see more shots of the AT-99 here.

60115 4×4 Off Roader [Review]

We’re taking a break from reviewing all those Star Wars sets to catch a look at something a little closer to home: a good old fashioned racing truck. 60115 4×4 Off Roader hit stores in December, and is currently available for $19.99. It has 176 pieces.

Click through for the full review

Oh! What fun it is to ride in an Arctic Truck Mk II!

Well, the winter holidays are long gone, but Kirill doesn’t want the outdoor fun disappear. So, here is his Arctic Truck Mk II – an ultimate snow-rover in the scale of a regular Technic minifigure. One may find the exterior quite plain, but Technic vehicles are all about functionality.

Check out this video to see this impressive crawler in action.

And I can’t help mentioning a couple of the builder’s other models.

Click to see more great Technic vehicles by this builder