When wandering through a LEGO landscape strewn with ruins, you would be advised to watch your step. Just ask Gus. who, as the cereator of this scene, probably has a good idea where it is safe to step to avoid the deep swamp water among the mushrooms. The whole scene is elevated, allowing fern fronds to barely emerge from the surface. With so many kinds of mushrooms you probably should also check your pocket guide to make sure you pick the right ones for your stew.
Prolific builder Eero Okkonen is the Geppetto of the LEGO community, crafting detailed characters with such personality that they seem ready to come alive. His latest model of a blue fairy isn’t inspired by Pinocchio, however, but by a fairy tale from Eero’s native Finland, Pessi and Illusia. Eero employs his usual panache for NPU (nice parts usage), with the highlight perhaps the Queen’s Dragon heads used as Illusia’s skirt. As lovely as the fairy is, it’s Pessi the adorable toad who steals the show here, with those perfect saucer eyes and sporting a wonderful wicker basket of interwoven flex tubes. The scene is rounded out by delectable cloudberries on stems that incorporate foam leaves, appropriately enough, from the Belville Flower Fairy Party.
This year, 2024, marks the 25th anniversary of LEGO Star Wars, and builder “2mpaired” has created this Mos Espa pod race scene from the 1999 film The Phantom Menace to commemorate the occasion. The scene, with sand and rock formations spilling over the edges of the diorama base, brings the motion and excitement of the pod race to life. The pod racer builds for Anakin and Sebulba, the scene’s main characters, are among the best minifigure-scale models I have seen. If you’re not impressed, take a look at LEGO’s microscale model “75380: Mos Espa Podrace Diorama” to fully appreciate the detail in both landscape, minimal yet telling, and the racers themselves.
If there’s one thing I’m a sucker for in LEGO creations of mystical worlds, it’s floating rocks. And had Mihał Ch (AKA BardJaskier) just shown us this serene scene of floating rocks and waterfalls, that would have scratched that particular itch. But he’s gone one further and thrown in another favourite of mine in the shape of a majestic jade dragon! I must confess that I first thought it was a Pokemon called Rayquaza – and in my defense, I think it does bear a passing resemblance. But its presence does lead to some questions; primarily, what is that mysterious figure at the top doing? Although he has a sword in hand, it all seems quite peaceful here, at least for now. Has he come to seek the dragon’s guidance, or challenge it? Or has he just stumbled across it by (mis)fortune?
I love me a bit of Asian food. Korean BBQ chicken, a nice bit of sushi, phad Thai, and you can’t beat some good pho. But right now, I’ve got a craving for some noodles done Chinese street-food style. And for that, I have Khang Huynh and his LEGO noodle cart to thank! For a build seemingly devoid of life, it’s very atmospheric. In part that’s helped by some judicious editing and lighting choices, but it’s as much down to the build. The little details like the soy sauce bottles or the stickers (borrowed from Monkie Kid and Lunar New Year sets, among others) really sell the scene. And there’s the juxtaposition of the old-fashioned cart with the very-much-20th century folding table and stools. I can practically smell the waft of fresh noodles from here… And it’s as good as this build looks!
![[Familiar #14] - Chinese Noodle Cart_02](https://live.staticflickr.com/65535/53903262125_7ecc44ef91_k.jpg)
For the Geneva sisters Anna, Sarah, and Geneva (aka Three Little Mice, Tayaya, and Geneva D), creating with LEGO is a family affair. The three talented builders collaborated on a series of life-size swords to showcase at this year’s Brickworld, each forging a personal blade with its own personality.
Geneva’s broadsword, dubbed Kalypso, is the largest of the three, requiring two hands to hold. Using brown and metallic silver (and a touch of Spinjitzu!) on the hilt for a studded leather look, this is clearly the blade of a warrior. She pairs the sword with the smaller and more play-friendly dagger, Acheron, which boasts a serrated blade and a menacing Hero Factory spiked ball on the hilt.
Read on to see unsheath the other blades!
We’ve got a LEGO build here from Jonah Schultz and I gotta say he’s knocked it out of the park! His microscale skyscraper is all about bats that were only available in a minifigure pack from 2018. The minifigure bats make up most of the outer structure of the skyscraper, but did you notice that the power-line poles are bats as well? The sneakiest use of the bat is for that tiny tanker truck. The building isn’t the only heavy hitter; That whole road network below the building is brick-built. The dashed lines between the lanes are made from brackets embedded deeper into the road. Back to the building, did you notice how those bats make a diamond shape? Can’t be an accident when this build is a home run!
When LEGO builders collaborate, great things are bound to happen. Micah Beideman, Eli Willsea, and Grant Davis have gotten together to build the mystical breakwater called the Numinous Isle. Let’s talk gold! At the very top of this build, you’ll find a few gold 4×4 wedges. Those pearl gold pieces were only available in two sets from 2013. Behind the gold sais and interlocked gold bar clips is the grand dome of the build. That dome is one half of the Star Wars planet Bespin from a set released in 2012. Take a look further down at that grey arch. Did you know that macaroni pieces fit into a large arch so neatly? I sure didn’t! Even lower down, there’s a pair of fins from an A-Wing masquerading as part of a wall. Check out that fountain too. It looks like the ingots fit just perfectly into that specific wheel. All of that beautiful building only takes us to the shoreline. What other secrets are hidden beneath the waves?
Even if most LEGO builders are too young to have played with Legoland Castle when it was released in 1978, the vintage set with its iconic yellow brick walls holds legendary status among fans. Many have paid tribute to the set with homages and re-imaginings over the years and now Olle Moquist is the latest builder to catch the yellow castle nostalgia bug. Olle strikes an appealing balance between tradition and innovation while using no black, white, or grey elements in the building itself. The parapets atop large arches are straight from the original, while the central keep is reinterpreted with modern techniques and a more historically accurate design. The cross-shaped windows framed by minifig legs, nanofigure statuary, and purple banner fringed by capes are especially nice touches. For extra vintage flair, Olle digitally composites the castle into a backdrop reminiscent of LEGO adverts of the era.
While there are certainly smoother ways to travel from point A to point B, they won’t be nearly as memorable as riding on the back of this stone golem by filbrick. Bonus points for being able to stay in your hotel room as you travel. The simple eyes and slightly open mouth give this golem a very friendly look, although I expect a bit of collateral damage may be unavoidable given the size of those feet. A fun part at the center of the chest is the leg from the infamous Astromech Chopper from Star Wars Rebels.
This wonderfully detailed model of the famous Neuschwanstein castle in southern Germany by Geneva Durand is packed with nice part usage for sure, from the many different sizes of cone-shaped elements forming the tower roofs to the gears and teacups for the towers themselves. But one of my favorite details would have to be the many non-tree elements used to surround the castle with nature. Archer hats, ranger hoods, and the bottom jaw of a dinosaur are among the many cleverly used parts.
Of all the locations brought to life in The Lord of the Rings, Meduseld, the Golden Hall of the Horse Lords, is one of the most beloved. Isaiah Kepner recreates the building’s interior as Theoden toasts the victorious dead after the Battle of Helm’s Deep. The centerpiece here is the golden knotwork made from cleverly mixed tubes, window lattices, and other golden elements, framed by printed rune tiles. Isaiah meticulously matches the architectural details seen only in glimpses in the extended cut of Return of the King, including a perfect use of the stickered banners from Helm’s Deep and Isengard. Horses are integrated into the build with their heads used for wooden figureheads atop the columns, but I like to think that the Rohirrim actually have balconies where their horses can observe the festivities from above.
