Posts by Simon Friesen

A Star Destroyer floating ominously...

With one season of Andor out and another season somewhere on the horizon, it’s a good time to revisit the beautiful shots of Rogue One. This LEGO model by Codyaner perfectly captures the fearsome presence of the imperial hammer hanging over Jedha. Codyaner has done a great job of capturing the weathered, rocky nature of the walls and stone surrounding the city by stepping through light tan, dark tan, reddish brown, and dark brown bricks for the surrounding landscape. There’s such a huge variety of slopes in the rock that it would be impossible to list them all. I’ll shout out four here: the 2×4 wedge, the claw piece used for many a roof, and the shell and slope combo used on the right hand side. This city may be ill-fated, but if you look closely enough you’ll see the sparks of a rebellion burning in those city streets!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Jaw-dropping model of Rome took 107,000 LEGO bricks to build!

Rocco Buttliere has been astounding us for years with his massive microscale LEGO creations. Being no stranger to rendering massive landmarks and vast ancient cities in brick form, he has just released a new expansion to his fantastic SPQR diorama of the ancient Roman capital (the right half of the build in the photo below). This new section of the Eternal City – built at 1:650 scale – took over 107,000 bricks and several thousand hours spread over two and a half years to build, but it was well worth the wait! Lets take a tour of some of the ancient landmarks, shall we?

Continue reading →

Micro Barad-Dûr menaces a tiny middle earth!

If the price tag on the newly announced Lord of the Rings Barad-Dûr LEGO set is making your wallet feel like Viggo Mortensen’s toe, you should check out this micro-scale tower by Joe! From this mini monument to malevolent majesty, you can keep an eye on the hobbits with the DREAMZzz eye tile. With just a few pieces, Joe has captured the evil essence of the dark tower. The two outer towers are captured by a hilt and a plate with a bar, while all the spiky decorative business is made out of a few grills and a gear. I do wonder if Sauron will need a microscope to find the one ring at this scale!

A new Red Baron

This red baroness may not prowl the skies, but with that rapier, I know that this LEGO model by Eero Okkonen means business! Eero is an accomplished builder of figures and other structures, and you can check out our past articles on his work here. This baroness duels in style in her cape borrowed from the Chirrut Îmwe constraction figure, while her trans-red skirts were only available in the 2022 set 80035 Monkie Kid’s Galactic Explorer. The Baroness shows off her station with a wealth of golden trinkets on her outfit, but I’d like to draw special attention to the buckles on her cape which – using only two parts – clamp onto the fabric. Would you dare challenge her?

Less than 50 shades of grey

I love it when a LEGO build leans into an aesthetic. This build by Jessica Farrell is done completely in monochrome – like an old timey movie – and displays a crumbling landscape frozen in stone and fossilization. There’s more interesting parts in this build than I can point out, but here are some of the highlights! Sprinkled around the build you’ll see tiny flowers in flat silver. These flowers were only available from the Trolls World Tour 2020 product line, while the arching spine on the upper left is made of parts that ceased production in 2016. There’s vines climbing the ruined pillars, and gears big and small. One thing I know for certain, Charlie Chaplin has to be hiding in there somewhere!

A char-CUTE-erie board for you!

Boy, do we have a treat for you today folks! This LEGO build by Carter is an outstanding mix of the tasty and adorable. While the individual treats are not what you might find on a charcuterie board, their chubby cheeks and stubby arms might make up for that. That donut in the center is covered in smooth lavender-colored icing, with the macaroni-shaped pieces coming from a single set released in 2022. The thin seaweed layer around the sushi is made from 2×2 curved slopes. With food this cute, could you bring yourself to eat it?

An android endorsed by Spielberg himself

In the distant cyberpunk future, you might run into this LEGO android by Joey Klusnick! This build is a great example of using a highly unique LEGO piece to create something new. That camera that makes up the android’s head is the old USB camera sold in 1349-1 Steven Spielberg Moviemaker Set from the year 2000. The body of this robot is a wonderfully organic series of wrapped rubber. But here’s the thing: that’s still part of the camera! The USB cable of the camera is (apparently) ridiculously long, so Joey has used it to create all the muscle-y bits this android needs to run around. I also want to point out that the USB plug on the droid’s left arm fits perfectly into a pair of fences. One thing I know for certain is that this droid will always get its shot!

What’s all the Buzz about?

Buzz Lightyear flies again in this LEGO model by Inthert aka Tom Loftus, bringing us a custom take on the movie starfighter previously depicted in the official set 76832 XL-15 Spaceship. Strap into your cockpit, because there’s oodles of great building techniques on display in this model. From the outside, the techniques are so smooth that they’re almost hard to see: The red stripes on the wings are separated by white ingots; the winglets are made from claws; and there are tonnes and tonnes of cheese slopes to help create all the angles of the fighter.

Tom has also kindly provided us with in-progress pictures of the internals of the fighter. I’m sure I can’t even describe the half of it. There’s boatloads of various brackets and 1×1 bricks with studs on the side. There’s also 1×2 round plates, and 1×2 round plates with bars. Finally I’ll point out that there’s a few little minifigure utensils scattered throughout the build. See if you can find them!

This space cruiser was built in a ZNAP!

Even though it’s not September, we can still enjoy a LEGO SHIP when we have the space-time! This LEGO model by space_e has nostalgia built into its bones, with the skeleton of this behemoth built out of LEGO ZNAP parts. There really is a lot of nostalgia packed into this massive space ship; the windscreens are two different styles in trans-dark blue – including one with an Alpha Team logo! There’s also a few of that old type of Technic panel used on the main body, helping to round out the star cruiser. So climb aboard, and lets blast off into the retro-future!

Here’s a different angle to help show how incredibly massive this beast is! And be sure to hit up space_e’s Flickr page for some WIP pictures and zoom-ins on the details.

Goats graze by a tranquil LEGO temple

For your daily dose of serenity, you should check out this LEGO temple by Andreas Lenander! There’s lots to love in this elegant and refreshing build. For starters, there are a host of animals that call this temple home; panthers, chameleons, birds, and goats oh my! In the pond on the right, Andreas has notably placed his water lilies upside down (using the power of gravity!) to mount blossoms on the stems, while the elegant temple itself is made from a selection light and dark tan bricks. I sure hope that panther is just passing through!

A “train”-ing spaceship in blue and yellow!

If you need a space fighter to hunt bogies with, this LEGO ship by Linus Bohman might be just the thing you need. Linus built this fighter around a skeleton of railroad track parts including curves and straights from the 4.5V era and six Duplo curve sections. I’d argue that this build is all horsepower, no ballast, with huge engines embedded in each wing. All-in-all, the grey details between the rails provide a nice buffer, while the rails themselves couple everything together!

This little Star Wars astromech is bursting with personality

Everyone’s favorite little droid with a huge personality is back in brick form, built in LEGO by Ron McPhatty. Ron has managed to pack an impressive amount of detail into Chopper’s diminutive stature using solid building techniques. That yellow 1×1 tile on Chopper’s chest perfectly matches the original design, and the 2×2 triangular tiles match his patchwork metal plating. Ron also models a variety of Chopper’s exposed internal components with various LEGO pins, bars, and bushes.

Even better, Ron has built Chopper to be in-scale with the new LEGO R2D2 set and provided Chopper with some added accessories that model his middle wheel and head arms. I’d argue that hijinks are un-a-droid-able!