Tag Archives: Spaceships

Time to activate your hyperdrive and build The Ghost from Star Wars Rebels [Instructions]

As Star Wars fans will know, the Ghost was piloted by Hera Syndulla and was the starship and home base of a small band of Lothal rebels. She was named for her ability to travel past Imperial sensors without detection. If you missed out on buying LEGO’s 75053 The Ghost before it retired, then this beautifully designed microscale version by Inthert is well worth building.

Microscale Ghost

The simple breakdown instructions show just how well this microscale Ghost has been designed.

See the step-by-step instructions for building your own LEGO Ghost

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A singularly great ship called Prometheus

Ashes of the Singularity is a real-time strategy game set in a future where the technological Singularity and advanced “Post Humans” wage war against each other for the resource Turinium. Gilcelio Chagas has built a LEGO version of the Prometheus, a Post-Human Coalition capital ship that features in the game. The shaping of this ship is fantastic with the colour blocks of red providing a perfect highlight. There’s a lot of weaponry on show with imposing turrets and guns visible throughout the ship.

Prometheus

I love the angled slope of the hull and the red highlights, but my favourite detail is definitely the use of the wheel rims and light blue interior along the outer edges of the ship. Are these for power? weapons? steering? No idea, but I love them.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Have I seen this spaceship somewhere before?

YT-1740 is designed to be a fast and agile light freighter, only half the size of the Millennium Falcon and shaped like an arrowhead.  Builder ZiO Chao has supplied her with three powerful engines and two pairs of long-range antenna on its sides. The builder points out that you may recognise features from other ships in the Star Wars franchise: The Defender-class light corvette from the Old Republic era, the Ghost from Rebels, and also Kylo Ren’s command shuttle from Episode VII. The red string pattern is a nod to Homeworld, and the shape of engine comes from the battleship of Gundam.

YT-1740 Arrowhead

The detailed minifigure-scale interior has everything you could wish for — a medical room in case of inter-galactic mishaps, a meeting table for planning those all important missions and a crew resting area for a cold beer and a laugh about the latest crisis. The builder has put a handy label on the locations so that we don’t get lost finding the way to the bathroom at night.

YT-1740 Arrowhead Interier

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

She may look like the fastest hunk of junk in the galaxy, but she ain’t

I don’t think Hannes Tscharner has ever taken a photo that didn’t look amazing, and his most recent YT 1300 freighter is no exception, not to mention the build is first-rate as well. The model is a take off of his original 7,500 piece Millennium Falcon build, meant to be a modified version from the same family of ships, likely used by another crew of space smuggling experts.

Heavily modified YT 1300 „Red Fox“ (Freighter Wars)

The red trim on the craft is very eye catching, and the photography is exquisite. It seems like the “Red Fox” as the builder has named it, has run into an asteroid field, perhaps trying to lose some imperial TIE fighters.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Cruise around the galaxy in sleek style

Spaceships can come in all shapes and sizes, and this build by Inthert manages to capture an unusual form with brilliant brickwork. Its organic shape makes it stand out — a beautifully curved structure, something challenging to achieve in LEGO. The key in making a great spaceship model is making one believe what it can potentially do. What sells this is not only its aerodynamic shape and the depth of functional-looking details, but enough bulk and build around the engines that it genuinely feels like it could have sufficient thrust to make warp speed.

EC21-Cruiser - 'Ellipsis' (2)

The side profile certainly gives you a sense of how curved and elegant the model looks…

EC21-Cruiser - 'Ellipsis' (Poster shot)

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Sometimes a hex key and a ton of patience are all you need to assemble an excellent cargo spaceship

LEGOLIZE IT MAN enters this year’s SHIPtember building challenge with a stunning spacecraft promoting one of the world’s famous home furniture producers. It’s hard to say whether the assembling process was as hard and exhausting as it is of a some Swedish kitchen table, but at least there are no spare screws lying around.

Olyckan 2

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Set shields to maximum! Incoming unidentified battlecruiser!

Extending to a length of 125 studs — or for better scale, the length of 4 LEGO modular buildings — this battlecruiser dubbed the Basilisk was designed and built by Pico van Grootveld, and it’s a thing of stunning beauty. The belt frame built in yellow gives it a sturdy and unique texturing for a spaceship’s body. The army green all over makes it feel like it’s a tank-class battleship not to be messed with, especially with the menacing looking fins — or spikes shall I say!

SHIPtember 2017: The Basilisk

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Flying in an alternate bubble of reality

If you’re a fan of the sci-fi film Oblivion, you should recognize this unique bubble ship piloted by Tom Cruise. Builder Marcin Otreba constructed a worthy replica of the vehicle sparing no expense for details and function. He did a good job capturing the visual styles of the movie into LEGO brick form. It is said that the ship was inspired by the Bell 47 helicopters of today.

Lego Bubble Ship, Oblivion

Lego Bubble Ship, Oblivion

Marcin did slightly modify the design to fit a single passenger to provide details from the actual movie ship.

Lego Bubble Ship, Oblivion

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Spaceship makes two-pronged attack

Intergalactic space is getting busy with SHIPtember traffic as the number of large LEGO spaceships begins to rocket. Here’s another fine looking vessel called the ZC Lapsadle. Built by TBB alumnus Simon Liu, it definitely meets the longer-than-100-studs criteria to be a SHIP. The flashes of Bright Light Orange are a standout feature along with the interesting two-prong shape of the bow. I love the central launch bays on either side — dark and deep enough to generate some intriguing shadows.

ZC Lapsadle

Do you think Simon actually built two of these ships or are we seeing some artistic jiggery-pokery at work?

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The Void Raven under cover of night

From Random Vector‘s imagination flies the beautiful stealth starship Void Raven. The dark color scheme not only evokes the stealthy feel of the spacecraft, but also places the spotlight on brilliant texturing and clever parts usage throughout.

Void Raven

The pair of translucent blue Bionicle masks inside of an inverted tire in the rear, and the arrays of tread links, are my personal favorite details highlighted here.

Void Raven (details)

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

When you cross a dragonfly with The Matrix

What does September mean to you?  Perhaps it signals the end of summer, when the days are noticeable shorter and leaves start to change colour.  For a significant number of LEGO builders, September is SHIPtember when the aim is to build a large spaceship of at least 100 studs in length. Marcin Grabowski completed this huge dropship on 10 Sept after 29 days of building.  His DragonFLY class dropship is certainly eye-catching with its lime and yellow hull. I love those central wings with the ball of complex machinery, wiring and ducts at the connection point.

SHiPtember 2017 - DragonFLY class Dropship - Final. Finished at day 29

Sometimes is is hard to get a sense of scale with this type of large model.  I am happy to report that  Marcin did exactly what any self-respecting LEGO SHIP builder should do…he swooshed it!

Dragonfly class Dropship. Swoosh;)

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Prepare for impact! Full power!

Talented Canadian builder Simon Liu confesses his love for the majestic Star Destroyers of the Star Wars universe by recreating an episode of the final battle from Rogue One: A Star Wars Story where two of them, well, are being destroyed. With numerous debris torn off the ship’s surface, this unusual diorama is much more complicated than just two starships colliding. The way each piece is connected creates a strong illusion that every part of this scene is actually floating in open space above Scarif.

Star Wars: Rogue One - Star Destroyer Crash

And, of course, here is the hero of the battle — a small Hammerhead corvette pushing one of the Destroyers towards its certain doom. And it’s impossible to ignore Simon’s keen eye to details with an edge of the Destroyer’s body being actually crushed by the Hammerhead.

Star Wars: Rogue One - Star Destroyer Crash

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.