Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

Find your inner LEGO peace on the mountain summit

There is something about this mountaintop temple by David Zambito that just makes me want to be there. Climbing the mountain for days to reach it, and then meditating for just as long. The serene environment is achieved by soft, earth-tone colours and a warm background. There are many great techniques used throughout, like jet engines as bells, and hair pieces and convex tiles as cobblestone walls. I am not sure whether I am supposed to imagine a larger temple behind the scene or not, but it works either way.

Mountain Top Shrine

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Bet he won’t reprimand his daughter

Every LEGO builder knows it’s better down where it’s wetter, but LEGO 7 takes it into uncharted depths of building skill with his rendition of King Triton and Princess Ariel. The Little Mermaid herself is immediately recognisable, but it’s the modeling of the Trident-wielding monarch which grabs all the attention in a fabulous combination of System and Hero Factory parts. That beard! That crown! Great stuff, but the best bit is the use of hot air balloon pieces for the tail. Genuinely inspired.

King Triton and Princess Ariel

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

3 LEGO sets from DC’s upcoming Justice League movie revealed [News]

Today, LEGO has pulled the wraps off three upcoming tie-in sets for DC’s Superhero Justice League movie, which is due in theaters November 17. The LEGO sets will arrive earlier, hitting store shelves August 1. This will be the first time LEGO has produced a film-accurate Aquaman minifigure, while the Batman and Flash minifigures sport updated designs. Between the new sets for The LEGO Ninjago Movie, Thor: Ragnarok, and the inevitable slew of Star Wars sets, it seems much of LEGO’s offerings for the rest of the year that we’ve seen so far are tie-ins to the big screen.

76085 Battle of Atlantis

76085 Battle of Atlantis

See all the images below.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Super-Duper Duplo Mech

Who’s the King of the Toybox? Well, I think we can answer that now. nobu-tary‘s latest LEGO mechanoid/hardsuit creation is a typically beefy beast, but tricked-out in an atypical colour scheme, accented with the use of Duplo bricks. I like the air of comic menace this thing is lugging around.

Duplo-bot

Don’t miss the rear view, with the Collectible Minifigure retro-style rocket put to excellent use as a jetpack — a perfect fit for the overall aesthetic.

Duplo-bot

Whilst I love the model, can we maybe see LEGO mechs adopting a different pose? That whole “chin down, hips forward” stance thing is becoming something of a trope — the cyberpunk equivalent of steampunk’s brown.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

New Elementary LEGO typography competition results [News]

Back in May we told you about the LEGO typography competition taking place over on the LEGO-elements-and-colours-obsessed blog New Elementary. Over 100 creative and ingenious font designs were submitted, making the judges’ job really tough. The final three winners can be seen below, but it’s worth seeing the lot!

Eduardo Moreira (Brazil):

Li Li (USA)

Lego Gothic font

Jeffrey Kong, Artisan Bricks (Singapore):

Honoured to be one of three first prize winners of @newelementary's Lettering #Contest, where the challenge is to create the words "LEGO #DNA" using the new LEGO tiles. To me, this medium is all about inspiring people to learn and create with their hands,

You can read more about the entries and the judging process over on New Elementary.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO Space: ICE Titan – exclusive free download and interview

The Brothers Brick enjoyed LEGO Space: Building The Future — the book of wonderful sci-fi creations from rockstar Space builders Tim Goddard and Peter Reid. When the guys got in touch to say they’d penned and illustrated a new tale set in the LEGO Space universe, we got very excited. Even more so when they asked if we’d like to host the tale as exclusive downloadable content for our readers.

ICE Titan_poster

Click here to download a free PDF copy of LEGO Space: ICE Titan.

ICE_Titan-002

We picked up with the guys to find out more about the creation of this new chapter in the LEGO Space saga…

Click to read our interview with some of the creative team

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

To be frank, it’s a nice house

Chris Eyerly has built an excellent model of the Laurent House, a lesser-known work by Frank Lloyd Wright, built in 1951 for Kenneth and Phyllis Laurent. Chris has used some unorthodox techniques to capture the flowing curves of the house, particularly “brick bending”, in which many 1×2 plates are connected to form a wall, then the wall is bent into a curve, taking advantage of the tiny gaps between each piece.

Laurent 5

It can be challenging to capture curves with a system based on squares, much less integrate the curves with the square sections without ugly gaps between the bricks, but Chris has done a perfect job here, all while staying true to the original design.

Laurent 2

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Machu Picchu in microscale

In 1983, UNESCO designated the legendary Peruvian citadel of Machu Picchu as a World Heritage Site. Located in the Sacred Valley, 50 miles northwest of Cusco, the city was constructed around 1450 at the height of the Inca empire and was abandoned just over 100 years later. At time of writing, the LEGO Architecture theme has yet to feature a South American structure or building. This omission prompted Diego Baca to build his own microscale version of this historic site.

Machu Picchu

Diego has captured all the key features including Huayna Picchu as the mountainous backdrop, the blue of the Urubamba River glistening on the left, and la piedra sagrada [tr. the sacred rock] represented by a single 1×1 round plate sitting on high. Also note the wandering llama in the middle of the site!

Diego has kindly created PDF instructions for this model in the same style as the official LEGO Architecture instructions, with a few pages of photographs, historical information, and step-by-step building plans.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Weapons from a galaxy far, far away

I have to admit, I never really gave much thought about Chewbacca’s weapon of choice until Han Solo gave it a go in The Force Awakens. What I can’t believe is that in all those galactic years, Han never had a chance to wield this weapon, not even for target practice. What I do know is that this build by LEGO Admiral does the bowcaster justice with the level of detail on it.

My Lego MOC of Chewbacca's Bowcaster

Other weapons wielded by Ray and Solo respectively have been built with equal care and attention, with the bases making for excellent for a table top display. I’d certainly like to have these on my office desk, as would any self-respecting Star Wars fan.

Rey & Han Solo Blasters

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

You say po-tay-to, and I say po-tah-to!

This is one of those builds that had me going “why didn’t I think of that?!” The part that inspired it was the balloon element first seen in 2015 the Friends set 41097 Heartlake Hot Air Balloon and which has since been issued in a variety of colors. Builder Tan Kok Mun takes the classic child’s toy Mr. Potato Head (which younger readers may be more familiar with from the Toy Story movies) and recreates him almost magically and perfectly in his standard get-up. If you haven’t already noticed, there’s a little bit of a smart use of transparent bars to help the arms appear connected to the body …nice work!

tkm-KAYU_BUILDER-Mr.PotatoHead-RunawayHand-1

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

You can’t control the wind, but the sails give you control of your destiny

This sailboat by Daniel Church evokes quite an ethereal feeling. From a certain point of view it looks like any other vessel, but a closer look at its sails reveals an ingenious tessellation of pieces that makes it seem otherworldly. The blend of white and light grey gives off a very soft and pleasant blend against the thematic background of the ocean. What impresses me most though is the curve of the hull – I’m curious on how it’s held together internally!

Esprit Del Mar

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Oh this is the night, it’s a beautiful night, and we call it bella notte...

Who knew those LEGO hot air balloon panels would make perfectly floppy pupper ears? Well as you can see, builder LEGO 7 knew. In fact, their spot-on take of the iconic spaghetti scene from Disney’s Lady and the Tramp is packed full of tremendous NPU (Nice Parts Usage) which gives these two pups a cuddly, soft appearance. The only thing missing from this creation is moonlight and accordion music.

Lady and the Tramp

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.