Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

I hear drums. Drums in space.

The blackness of space. Drums that become louder. Pan down, a massive angular spaceship hovers above a planet covered in city lights. These images and sounds make a very strong first impression of a movie. It sets the tone of Star Wars Episode 3: Revenge of the Sith, and many of us associate that opening shot to the angular Venator-class Star Destroyer. Martin Latta spent two years building a massive and accurate LEGO model of this beautiful ship. He painstakingly recreated every small detail he could find on the original studio miniature model, bringing his build to be over a meter long and consisting of 11103 pieces.

Not only did Martin nail the complex angles of this ship with clever layers of tiles and panels, he also threw used the shapes of LEGO pieces to create textures on an otherwise smooth hull. Dark red highlights break up the typical grey of this Star Wars vessel, and the brick-built Open Circle Fleet insignia brings a splash of an additional colour. What I consider the icing on the cake: the top red hull paneling splits open to reveal a hangar, from which Anakin and Obi-Wan’s starfighters take off to partake in the Battle of Coruscant.

Check out Martin’s Flickr album for more shots of this behemoth, as well as work in progress pictures!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Just keep swimming with this LEGO fish creation

This LEGO creation from Brickleas is deceptively simple and colorful, to say the least. The bright colors play off each other beautifully without taking over the scene, and the variety of underwater vegetation is well done, especially with the implied, yet peaceful, movement. This build was a submission for an Iron Builder contest, where the builder had to use this odd shield holder part, and Brickleas did a great job incorporating it into a well-textured fish.

Sometimes just a little bit of DUPLO is enough

I have a soft spot for Tudor-style buildings, brick-built trees, crumbling brick walls and interesting colour choices. This little medieval bakery by Danthefan ticks all the boxes for me. The Tudor style looks nice and simple. It even is used for the round tower, which isn’t an easy thing to do. The building has a little stone porch complete with stairs, and the stonework around the base of the house looks as if it has been there for a long time and has passed the test of time. You might notice that while the roof is bright green, the top of the roof of the tower is medium green. I had a hard time identifying the LEGO piece used for the top of the tower. Turns out, it is not LEGO System, it’s DUPLO! and it is brilliant. I currently do not have any DUPLO at hand but it appears the axle connector with four bars used as the base of a weathercock fits the open stud of the DUPLO part snugly. Last but not least, have you seen the spruce tree made of claws?

Egad! Egyptian stuff that’s historically colored, and not just tan

It is a common misconception that ancient Egyptian architecture was as blandly colored as the surrounding desert. Historians, and, it seems, LEGO builder Mihai Marius Mihu, believe otherwise. And if you ever played Assassin’s Creed: Origins (which was heavily inspired by historic research) you might have climbed up a temple much like this one, dedicated to Anubis, the jackal-headed god of the afterlife. There are so many wonderful splashes of color, from the tiny row of green, gold, red, and blue tiles along the roof-line, to the elaborately detailed carvings atop the rows of pillars on each side.

That’s definitely no moon...

If you’ve seen portions of this LEGO space station by Tim Goddard, then it may be because we wrote about it back when it was just Platform 7. As minifig-kind continues exploring the vastness of space, so grows Tim’s elegant outpost. I like to think that the oil rig-like Platform 7 was just the start of an expansive exploration colony. Tim built a hexagonal landing pad as the second module of the space station, and I eagerly await the next sections.

Looking at the aesthetics of this sci-fi playground, it has the usual colour scheme of realistic space stations, but Tim makes it interesting with a masterful balance of smooth whites and grey greebles that only he can achieve. While it is different from the retro feel of most Classic Space builds, this station conveys a futuristic look. This is all thanks to the new torsos provided by recent Creator sets and collectible minifigures. After all, space exploration can only move forwards.

Be sure to check out more space-y stuff by Tim Goddard, and if you want a fun story to his Classic Space builds, he also wrote LEGO Space: Building the Future with fellow builder and LEGO IDEAS Exo Suit designer Pete Reid.

Tim, Pete, if you’re reading this, please write a sequel!
xoxo, Mansur “Waffles”

We all want $1000

One could argue that this LEGO creation by balticlegomoc is of a guy who wants $1000 presumably for a festive makeover. But that’s not how wanted posters work there, pardner! Wanted posters alert the public that a bounty is out on some steely-eyed outlaw or another for the crimes of extreme vagrancy or something. From a graphic design standpoint, there are two different brick-built fonts here neatly centered, which can be hard to pull off in LEGO.The use of grayscale give this an old-timey feel. I like that this particular steely-eyed outlaw is a brick-built bust with a literal handlebar mustache.

Conversion Van Conversion

Sometimes the best inspiration for a custom LEGO Creation is an official LEGO set. When 1saac W. saw the brown van in the upcoming Avengers: Endgame Final Battle set, he knew he had to have one – but in classic black with stylish pin stripes. In addition to the color swap, there’s some more subtle upgrades that make the model even more accurate to the real 1970s Ford Econoline: a round window in the back, an exhaust pipe just behind the rear wheel, and even door handles made from minifigure roller skates. I bet if we could see inside there’d be some stylish shag carpeting and a rocking 8-track player.

Mech behemoth towers over all

From the classic mecha anime, Mobile Suit Zeta Gundam, Moko’s model of the Rick Dias comes loaded with weaponry. This red giant supports a long bazooka and also has a pair of beam pistols attached to its massive backpack. A variety of slope pieces have been used throughout the design, the most prominent being the slope 2 x 2 x 3 part. The unusual circular section in the chest has been created by using round corner 4 x 4 x 2 pieces.

The model packs a punch with its articulated hands and can pull off some impressive poses even with a hulking frame.

By building in this scale the model has enough detail to make it near identical to its anime counterpart. This is one for Gundam and mecha fans alike while also demonstrating an impressive show of Lego engineering.

Star Trek: The Next Generation engage!

This new LEGO creation by Mikael Montelius features all your favorites from Star Trek: The Next Generation. From left to right we have Wesley and Beverly Crusher, Captain Picard, Data, LaForge, Riker, Troi and Worf. There aren’t many parts here but the likeness to each character is uncanny. I like that each shoulder is touching the next but is slightly askew. The base and the whole presentation makes for a handsome display that could adorn any desk or office. The formula is simple, yet brilliant. We’ve been smitten by Mikael’s work before but I can see this setting a trend for other builders to follow. Think about how this formula of characters on a neat linear display could work for other fun franchises like Star Wars, Marvel, DC Comics, Harry Potter or…The Human Centipede. Sorry. I’ll just let myself out.

Stolen Spyrius Technology

Back in 1994, the LEGO Space Police had to deal with one of their most challenging foes in the form of SPYRIUS, an intergalactic band of espionage agents who specialized in stealing the technology of more peaceful citizens in the United Galaxies Space Council. Now, in 2021, Spyrius has finally gotten a taste of their own medicine thanks to builder Moppo!, who has managed to steal some technology from Spyrius and used it to create this custom LEGO creation, a modern update on the Saucer Scout.

This version of the vehicle is larger, but it hasn’t lost the feel of a smaller ship perfect for recon missions. It’s still got those perpendicular engines, ready to blast the ship off in any direction, in case it needs to make a quick getaway from Space Police patrol ships in the area. The pops of lime green near the cockpit are a great compliment to the traditional red and black color scheme. And, of course, it’s not a real Spyrius set without that trademark printed tile.

11/12 Grimmauld Place – transforming Harry Potter build

Accio Harry Potter fans! This Harry Potter LEGO creation from Alan McMorran is a delight. Alan takes Grimmauld Place, featured as a transforming house in Harry Potter and the Order of the Phoenix, and expertly reworks the design to fit between Assembly Square and Pet Shop. It really does belong on this street from the dog sitting by the door to the exposed bricks to the white windows. When attention is drawn to the top of the building one starts to suspect that something’s a little…magical about this place. The windows look medieval and the color shifts to a somber combination of black and gray.

The model is great, but this is where it truly becomes remarkable. The building can be transformed from 11 Grimmauld Place into 12 Grimmauld Place. Watch the transformation here.

After the transformation. The difference in the smooth and studded walkways is a great detail. The skull and snake are very welcoming, don’t you think?

LEGO bricks crushed under hydraulic press to create a donut [News]

LEGO bricks are known to be extremely durable and it takes a rough magnitude of 4,240 newtons (950 pounds) to crush a single 2×2 brick based on tests by The Open University’s engineering department. The Hydraulic Press Channel, is known for crushing all sorts of things with a hydraulic press, and more recently, turning them into donuts. Their latest attempt is to experiment with LEGO bricks.

Click to see the video of LEGO being crushed into a donut