Out of all the Disney movies, I think Alice in Wonderland is the one that has inspired LEGO builders the most. The wonderful world created by Lewis Carroll lends itself perfectly to be reimagined with LEGO. Gayle Spiller created the scene where Alice follows the white rabbit down the rabbit hole. Even though the scene takes place in the real world we already get a sneak peek of some of the things Wonderland has to offer. There are a lot of little critters around the rabbit hole. The presence of mushrooms also is a bode for things yet to come. Using frogs for foliage is all the rage as of recently so why not try it in autumn colours. If LEGO can pass frogs for cherry blossom then why not use them for autumn leaves. I am really wishing Gayle turns this into a series of creations because she tackled the first chapter so magnificently that I want more!
Posts by Bart Willen
Gotham’s dark night never looked so good
One of the best things about building with LEGO is sharing your creations with the worldwide community of fans. But in order to do so, you need to take pictures of your builds, and this is where the tricky part comes in. Not all creations photograph well—especially when you build something with black bricks. Getting a good shot is quite tricky, and you tend to lose the details of the build. However, thankfully that didn’t stop Brent Waller from building Gotham at Night with mostly black bricks, and losing some details of the build works to Brent’s advantage here, as it is meant to be a shot of a city skyline at night. I really like how Brent used a mix of yellow and orange to represent the lights burning in the skyscrapers. The different sizes for stars also are a really nice touch, drawing my eyes away from the Batwing covering the moon. This creation really reminds me of a 3D Pop-Up book I used to have as a kid.
Indiana Thunder, uhm I mean Johnny Jones
To me, the Adventurers theme has always been LEGO’s answer to Indiana Jones before licensed sets were a thing. It is nice to stumble across like-minded people. Jesse van den Oetelaar did a mix between the Adventurers theme and Indiana Jones and the end result is amazing. The build looks gigantic. It is about 20 bricks high.Roller skates , binoculars and flowers plates are used as architectural details. There are foldable chairs and even an old school camera. The camera intrigues me as I can not break it down in my mind completely. I do know that Jesse cleverly used a brown flower stem as camera tripod. There also is an old school backpack used for the body of the camera. For the rest of the construction, I am completely clueless and would love a breakdown at some point.
The Moonbird Mausoleum
Autumn and spring are my favourite seasons. Nature changes so immensely during those two seasons. It’s almost magical, and this creation by Aurore really hits the sweet spot when it comes to the autumn vibes. The use of olive green for the grassy plains is complemented wonderfully by the vibrant colours of the fallen leaves. The star with stud holder works perfectly as a fallen leaf.
The overview of the shrine doesn’t do justice to the autumnal vibes that Aurore has presented, though, so let’s take a closer look.
Gigantic Sandman vs Spider-Man
LEGO has released quite a few renditions of Sandman. All of them have been minifigure scale, which is fine. Sandman can absorb sand in his surroundings and add it to his mass which means he can increase in size tremendously. To this day it still baffles me that LEGO has never created a brick-built Sandman to fight our friendly neighbourhood Spider-Man. Vincent Kiew is here to fill that gap. They created a brick-built Sandman from the waist up. Vincent’s Sandman is equipped with ball joints so you can pose him however you like. He even comes with detachable Schumacher-style nipples. The best thing about this build is that the face looks ever so friendly, something it does not have in common with the actual bad guy it is meant to represent. Thanks to the friendly eyes it kind of reminds me of my significant other trying to fend off a pesky insect and who wouldn’t want a LEGO rendition of that?
Intercity Express or modern day Magic School Bus?
Some parts LEGO produces seem to have a single purpose, the purpose they were designed for. However, most of the time these parts have studs or anti-studs so they could be used to build with. Vince Toulouse managed to incorporate the Life on Mars air pump The pump isn’t the only interesting piece Vince used. There is Bionicle seaweed and dragon tails used as engine exhaust pipes and the headlights are Clickits flowers. The round and curvy shapes of the dark green parts complement the shapes of the air pumps wonderfully. It’s nice to see the colour sand purple pop back up in a creation as it is a fairly rare colour. Somehow this model reminds me of the Magic School Bus which also always is a good sign.
Eroded rocks and wand fences
I love a good Tudor style build. And since LEGO is slow when it comes to producing castle themed sets we love to feature medieval fan creations here at The Brothers Brick. This creation by Robert features some lovely techniques. The one that really catches the eye is the use of upside down 1×2 dark blue plates for roof shingles. The roof needs the texture added by the plates because it is quite present in the build and without it the roof would look quite bland. The waterwheel is ingeniously made with a lot of A-shape wedges. For the rocks they used a variation of round bricks. This makes the rocks look like they got smoothed out by the eroding water traveling down from them. Also the cute fence made out of wands with sprue attached deserves a quick mention.
There’s something fishy about Skaldar Port
What is better than a nice medieval building made out of LEGO? An entire medieval city! Louis of Nutwood created Skaldar Port. A place that apparently is salty, damp and a bit stinky. It’s supposed to smell like fish. Even though it smells, it’s a place of hope for a lot of people who want a fresh new start in life. What makes this build amazing isn’t just its size. Each little building could perfectly work as a stand-alone creation. The stonework on the little houses is made with great attention to detail. There are a lot of different bricks used to depict the crumbling bricks of the building. From slopes to tiles to bricks to wedges. Using the same technique for the roof and the Tudor style throughout the build creates a uniformity to the creation that is really nice.
On a trip to Southern Europe without the hassle of traveling
What do you do when you can’t go on your trip to Southern Europe? Right, you just build a mini version of it! Andrew Tate made this lovely LEGO town square with a combination of different European style buildings. The build features a restaurant, a clothing shop, and lots of apartments above the shop and the restaurant.
There are a lot of nice details added to the buildings. One of my favorite elements is the fluted profile brick being used in brown as shutter and in tan as pleated blinds. The 1×1 tiles on the blue building do a great job representing tiles. The sand green building has windows adorned with loaf slopes. One of the things that really make this creation a lot of fun is the number of levels it has and the activity that is going on on each level. Your eyes can scan the picture multiple times and every single time you’ll notice something new. I can already imagine myself sitting on that lovely city bench underneath the blooming gazebo enjoying the busy city life in front of me.
Good castle builders always come in pairs
Do you know what’s better than a picture of one amazing LEGO creation? A picture of two amazing LEGO creations. This creation consists of a city built by Daniel Barwegen and a backdrop created by Bousker. I love the way a shared hobby like building with LEGO bricks can bring people together.
The city itself contains some smart part usage. We can spot a Mjolnir wall and round wheel cover windows. My favorite part, the ingot bar is used to depict decaying bricks. Between the buildings we can spot the blue roofed castle in the backdrop. The microbuild is used to create a forced perspective, and really deserves a quick zoom in. There are a lot of cool details hidden in the build, from the ripplig tiled waves to the flower stem pine trees . Even the puffy clouds are made of bricks.
Recreating the Rubensstrasse with LEGO
Anyone who has ever been in the process of remodelling a house has experienced the point where you just want it to be finished. For my home renovation, that moment came about one month ago. Although we are nowhere near finished, seeing this awesome LEGO creation by Aukbricks makes me look forward to having a finished home myself. Don’t let this sleek design fool you, as this creation is made on quite a large scale. Each floor is about 11 bricks high. For reference, the lamp post element used for the street lights is 7 bricks high, which is quite tall for a LEGO piece. But here it looks quite tiny compared to this wonderful build. Aukbricks has such an amazing eye for details, with every house having its own garden, curtains and plants in the windowsill. The design is based on the Rubensstrasse 11 to 19 in Düsseldorf, Germany, which gives you all the opportunity to look these buildings up online just to see what an amazing job Aukbricks did on representing them in the brick.
A celebration of the humble LEGO frog
When I first joined the online LEGO community about 20 years ago, I had to choose an avatar to represent myself online. I decided to draw the LEGO frog in MS Paint and use it as my avatar. The frog piece was released in the year 2000. Over the years some LEGO parts get redesigned. It is however my honest opinion that there is no way to improve the iconic little frog. For its time it is very detailed and still very cute. Four amazing builders decided to celebrate the piece and I could not pass it up the chance to take a closer look at them.
Roanoke Handybuck’s frog is currently visiting the Swamp with a lovely dock featuring some paint brushes and a beautiful architectural sculpture using red parrots.
Read on to see the rest of the models