Tag Archives: Star Wars

LEGO Star Wars is one of the most popular LEGO themes of all time. Far beyond X-wings and TIE fighters, there’s a whole expanded universe of inspiration, and an army of LEGO fans ready to build whatever comes out of George Lucas’s head next.

LEGO unveils Ultimate Collector Series TIE Interceptor and more alongside May 4th plans [News]

With LEGO Star Wars celebrating its 25th anniversary this year, May the 4th was always likely to be a big day for the theme. Today, LEGO has announced their plans for Star Wars Day, including a livestream event, a host of new sets, and some collectible memorabilia. The headline announcement is 75382 TIE Interceptor, which will be the next entry in the Ultimate Collector Series. With 1.931 pieces, it will retail for US $229.99 | CAN $299.99 | UK £199.99, and will be available from May 4th, with LEGO Insiders getting early access from May 1st.

Also arriving from the 1st of May are three Gifts with Purchase, availability of which will be through to May 5th or until stocks last. The main attraction here is 40686 Trade Federation Troop Carrier, which has a spend threshold of US $160 | CAN $TBD | UK £145 or more. The celebrations continue with a livestream event on May 4th, a 25-second film festival, and a coffee-table book entitled ‘The Force of Creativity’, pre-orders for which open on May 1st. More information on all that, as well as set photos, can be found below the jump.

Click here to read more information and see more pictures of the new Star Wars sets!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A spherical Star Wars battleship in a vacuum

Say what you will about the prequels, the opening scenes of the Phantom Menace are extremely compelling. The red Jedi cruiser approaches a Lucrehulk battleship – depicted for us here in LEGO by Jonah – for some tense negotiations. Jonah has made use of a number of classic techniques to capture the smooth curved lines of the ship in the notably square medium of LEGO. The center part of the ship is made using the Lowell Sphere, and the wider curve of the arms is made using hinge plates. Jonah has also added plenty of trans-light-blue accents to increase the visual interest of this build! Unfortunately this LEGO model will probably be short lived, as I can see a certain prophesied child in military hardware approaching bring this battleship to an unfortunate end!

Relive the adventure of Jedi: Fallen Order with a LEGO Stinger Mantis

The Stinger Mantis is the iconic hero ship and base of Cal Kestis and his NPC companions during his adventures in the Jedi: Survivor and Fallen Order games. This fantastic piece of Star Wars design is recreated in high LEGO detail in this model by Tim Goddard. Tim has spared no expense, and pushed LEGO’s clutch power to achieve the outstanding greebling (or scientific texturing, if you will) on the ship’s vertical fin. I love the details on the outboard engine; the front of the engine is a white life preserver, while the rear nozzle features a ring of clip-and-tube-holders.

Check out more views of this cool LEGO Star Wars model

This AT-TE does whatever a spider can

How’s this for a classic Star Wars moment captured in LEGO diorama form? It’s 2008, and you’re watching The Clone Wars, surely the last Star Wars movie you’ll ever see in theaters (haha, right?) when suddenly, a normal-looking All-Terran Tactical Enforcer starts climbing a frickin’ purple cliff like some sort of fat metal spider. Tim Goddard uses unevenly layered sloped bricks and tiles laid out in SNOT (studs not on top) fashion to achieve the irregular surface of the cliff. The AT-TE looks great in midi-scale—all the way down to the tiny clone trooper sitting at the turret.

Storm the beaches of Kashyyyk with this faithfully recreated tank droid

Whatever your feelings toward the Star Wars prequels, it’s hard to deny the quality of their production design. This LEGO incarnation of the NR-N99 Persuader-class tank droid by builder Matt (from Revenge of the Sith) is just one example of the many instantly iconic vehicles the prequels bestowed upon us. The build does its on-screen counterpart justice—from the fencing foils used for the antennae to the “I” typewriter keys cleverly repurposed as the droid’s photoreceptors. You can almost hear the pew-pew-pew of those heavy repeating blasters.

Tasty little LEGO Star Wars fighters leave you wanting more

LEGO Star Wars advent calendars have some pretty neat microscale ships, but it’s hard to get many good details at such a small size. Tim Goddard has no such trouble with these four microscale fighters, packing these pint-sized ships with a ton of great details and ace part usage, like screwdrivers for cannons. The iconic Y-wing and A-wing are fantastic, but the angled noses of the X-Wing and E-Wing are simple but especially effective.

A Star Wars force to recon with

At a glance, one might mistake this exceptionally tidy creation by Thomas Jenkins for an official LEGO set, and you could be forgiven for that, as the Jedi craft’s distinctive lines are recreated spot-on. But there’s a lot more going on here than you will find in any set (including easily triple the parts count!) – a result of Thomas’ “totally SNOT approach” to the subject. To my knowledge, the “Eta-2 Actis-class Light Interceptor” or simply the “Jedi Interceptor” has been offered three times as an official set at this scale, all of them using some variation of the same Bubble Canopy element seen here. No doubt starting with that element, Thomas’ build easily blows them all away, having tried “so many combinations to get the angles to match just right” before striking “just the right balance of aesthetics and compactness”. I couldn’t agree more! Time well spent, sir.

To borrow from another franchise for a moment, this is not the Jedi Interceptor we got, but it’s the one we deserve.

Try not to B2EMO on Rix Road

Big screen Star Wars adventures might lean heavily into swooshable LEGO-ready ships and alien vistas, but Andor emphasized sides of that galaxy far, far away that feel uncannily grounded and close to home. Abe Fortier (Hypolite Bricks) has been recreating those gritty, lived-in spaces with vignettes from every episode of the series’ first season, and his latest – a tribute to the uprising on Ferrix – movingly captures the spark of revolution from the finale. A digitally added projection of Maarva Andor looms large over the tense scene, but look closely and you’ll see that she also appears in brick-built form as… a brick, as per Ferrix traditions, the remains of local heroes are “bricked” into funerary stones. Bricks feature heavily in Abe’s creation, which uses no less than five colors of masonry bricks to recreate the earthy tones of Rix Road.

See more of Cassian’s exploits in LEGO form below

A LEGO Victory ISD worthy of the Empire

While the original Imperial Star Destroyer first seen in the opening scene of Star Wars Episode IV: A New Hope is much more recognizable, there are other less famous versions of the triangle-shaped warship, like the Interdictor, equipped with 4 large gravity well generators, and the Victory class like this LEGO digital render by Mm0nu. This model included large missile batteries on both sides, as well as additional turbo laser cannons along the dorsal edge.

Star Wars; going through some Dark Times

The brilliant thing about a huge franchise like Star Wars is once you’ve established a look and feel, once you’ve established some rules, Star Wars can keep expanding into infinity. The Brothers Brick alum Mansur Soeleman presents a LEGO diorama of the Mos Sakàa Town Center from the Star Wars: Dark Times RPG. I can wax ad nauseam about the major release movies all day, but I’m a bit less polished when it comes to some parts of the Expanded Star Wars Universe. With that said, I’ll let Mansur do the talking in his own words. “The people of Antolous I have scraped together a humble life on this rock. Few settlements dot the harsh orange landscape, but the oasis town of Mos Sakàa is the de facto capital of the desert planet. Built up from the ruins of a watchtower, Cestila Marroquin’s humble cantina serves as a seedy hub for the revolt against the invading empire…”

Continue reading →

Racing across the gulf between galaxies

Iconic racing liveries have more reach than we first thought, it seems. In LEGO Speed Champions 76905 Ford GT Heritage Edition and Bronco R, the former of the two vehicles sports the blue-and-orange colours of Gulf Oil, which have adorned countless other racing cars in this galaxy. In the galaxy far, far away, though, it’s Vertaro who has applied these colours (and that Ford’s windscreen, incidentally) to their own racing speeder. The asymmetric design is very cool, from the offset cockpit to the engine chained to the side. Now that might not seem like the safest way to attach your power plant. But at least if it breaks, there’s an unexpected passenger hanging off the side who can help fix it!

A Star Wars Fabuland hangar with a special feature for folks dealing with sight loss

We seem to love the LEGO theme of Fabuland here at The Brothers Brick. We’re also big fans of Star Wars, in case you haven’t figured that out. So naturally, when Stewart Lamb Cromar posted his new Fabuland Tie Fighter hangar, we were pretty thrilled. The Darth Vader TIE Fighter and the army of Perry Pandas looking very much like stormtroopers are quite charming. What we didn’t expect, however, was to learn that Stewart has been dealing with sight loss. As a result, this hangar, which would have normally taken him a few weeks to construct, took nearly a year factoring in eight eye surgeries and their associated recovery time. For individuals such as himself, Stewart included an extraordinary feature built into the detailing of this hangar.

Click to discover what I mean