Tag Archives: Creatures

Creepy crawly or fuzzy & fluffly (yes, that’s possible in LEGO), we love our LEGO animals. Check them out here, and fall in love yourself.

The Rock Raiders theme gets an upgrade

Rock monsters beware! Deus Otiosus has constructed this fantastic tribute to the classic LEGO theme, Rock Raiders. The models mimic the colour scheme featured in the original sets which makes these creations feel all the more authentic. Snowshoes form the upper part of the dragon’s head with spear guns representing horns. The brown piping across the chest is similar to the style of the windscreen piece that was frequently used in the original sets. The wings have an unusual construction, with large fans at the upper areas and stacked clip pieces at the lower sections. There is also a fun speeder build which uses a Bionicle mask to form its front section. It seems the Rock Raiders have a powerful new ally, ready to pierce through layers of stone in order to find precious energy crystals.

Rock Raiders was one of those fantastic LEGO themes with rich lore and intriguing storylines. Check out more articles on custom LEGO Rock Raiders models, inspired by the boulder-breaking heroes.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Watch out for the giant squid of the deep!

Be careful of how far you venture into the ocean or you might meet a terrifying creature such as this. Aiden Rexroad has built this frightening squid with a long shadowy form and piercing lime-coloured eyes. The organic style of the model is created through the use of a variation of inversed tires, placed along the squid’s outstretched tentacles. It appears there is a continuous ball joint system under the rubbery limbs, allowing the creature to pose, providing the model with the ability to drag unsuspecting victims down to the depths. Bohrok helmet pieces represent part of the monster’s body, which contributes to the odd rounded proportions of the squid.

If you didn’t think this build was scary enough, take a look at the huge array of teeth encircling the mouth. This creation demonstrates a vast knowledge of pieces and a unique understanding of the different ways in which LEGO pieces can be utilised.

You can check out more articles on unusual LEGO creature builds, here.

Better call the Survey Corps, there’s a Titan on the loose!

Imagine seeing this monstrosity peeking over your fence. Expect your fence is a 164-foot wall and the creature is a goliath, looking for snacks. That’s the basic plot of Attack on Titan. Khang Huynh has faithful recreated the Colossal Titan from the franchise. The fleshy, muscular form is accurately portrayed through the inventive application of pieces. Take a look at those nostrils. At first, they appear to be made up of an engine part, but upon closer inspection, it is actually made up of two backpack pieces. Another great use of parts is at the lower lip which is represented by baguettes. Mudguard pieces create rounded forms at the shoulders and chin providing the model with realistic, humanoid shaping.

The head sculpt of the Titan can also be placed on a segment of the defensive wall, which is used to keep those pesky monsters out. The wall has some great details such as the suggestion of age, conveyed through the variation of colours nestled amongst the brickwork.

Just hide your minifigures, I’ve heard this build gets hungry. You can check out more of our articles on Attack on Titan creations, here.

You wouldn’t want to get on the wrong side of this looming creature!

Mitch Phillips has built this fascinating creature that integrates organic-looking features into a mechanical design. The slender proportions and the sharpened claws of the model provide the creature with a menacing aesthetic. Curved tube pieces are used to form the piping at the chest while possibly representing robotic organs. The circular piece at the head is actually the invisibility cloak piece from the Harry Potter sets and presents the model with an appearance reminiscent of ancient aliens from science fiction shows. The large number of twisting cables suggests this could be an exoskeleton for an even more terrifying creature. The metallic colour scheme works to great effect under the light, accentuating the curves of the rounded pieces.

The cicada has one crazy summer

Cicadas are interesting in the sense that they spend most of their lives buried underground then emerge as horny, loud, unruly teenagers. Kinda like all those summer camp movies from the 80s. The sound these insects make is unmistakable and to LEGO builder Thomas Jenkins that distinctive sound means summer. This creature is chock full of nice parts usage including an inside-out tire comprising the thorax and a Constraction figure torso used as the abdomen. With the signature red eyes, the wings, and the stance, the end result bears an uncanny resemblance to the real thing.

While their legendary mating calls may be loud and their parties wild and unruly, the cicada lives its life above ground for only a couple of weeks, a month at most. Then they all end up looking quite like this. Fast times indeed.

Don’t look a gift varactyl in the mouth.

When you think of Star Wars, I bet your mind goes first to the Millennium Falcon and X-Wings. But that franchise has brought us just as many beloved weird creatures as it has spaceships. I mean, who doesn’t love a tauntaun? Or a rancor? And my house is full of plush porgs. But one Star Wars creature that doesn’t seem to get enough love is the varactyl, a reptavian creature from the planet Utapau. Koen Zwanenburg is attempting to make up for that with this excellent rendition of Boga, the varactyl mount that helped Obi-Wan chase down General Grievous in Episode III.

Koen began the build inspired by the NINJAGO Jungle Dragon set, and kept modifying until the results looked enough like Obi-Wan’s helpful steed. Personally, I’d never have guessed this model started as anything other than an attempt at a varactyl. The stance is a perfect match for the movie character, and the use of blue and green plant plates does a fantastic job of replicating Boga’s feathered back. In fact, the only varactyl detail that this build lacks is the lizard’s trademark cry. And, really, it’s better for it.

Block out the monsters with music

This eerie scene by Djorkson, is one thought-provoking build. The menacing apparition, looming over a humanoid monkey, possibly represents the inner turmoil of the swaggering primate. The piercing red eyes and pointed claws of the creature provide the build with a threatening aura. The tongue of the creature appears to be an old Rahkshi worm piece. Stalked by the monster, the monkey blocks it out with large headphones made from wheel rims. The addition of the musical note pieces, from the Trolls sets, is also a nice touch emphasizing music playing from the headphones. One of the most inventive techniques of the build has to be the upside-down bread bun used to represent the monkey’s mouth. Let’s hope the chilled-out primate can ignore out the stalking darkness.

Smooth as a baby’s... bottlenose?

I’m always impressed when a builder manages to make LEGO models completely smooth. Going stud-less can be hard, and even harder when dealing with organic shapes. This bottlenose dolphin built by Ken Ito (暁工房) may show just a few studs, but the body shaping is superb! The arch of the back end and tail are particularly well-executed.

It seems as though this builder has a knack and a penchant for these kinds of creations. Marine life is just a snippet of what he can do. Stick around to see more like this!

Efforts continue in cataloging the mechanical tree of life

The fantastic mechanical creatures of Mitsuru Nikaido have long fascinated me. As I was emerging from the dark ages of my LEGO obsession, the robotic structures of Mitsuru’s models opened my eyes to just what was possible within the LEGO system. While each creature is a dead ringer for their biological inspirations, they also stand separately from them. Their form and selective color-blocking create eye-catching robotic designs. Mitsuru mostly sticks to a light or dark bluish grey contrasting with white and a pop of bright light orange. This simple palette gives a builder plenty of parts to play with though and Mitsuru certainly takes advantage of his options. Let’s take a moment to check out his latest models of a Water bear and a Snail.

Continue reading →

So, head or no head?

Guys only want one thing and it’s disgusting. However, in the world of praying mantises, that doesn’t always work out. It’s the lady who gets the head — literally. Expert builder Djokson sets the table for a romantic candlelit dinner, with fancy tablecloth and a glass of wine. Lady mantis appears to have been stood up by her suitor, until her meal is served on a big platter.

While this is a fun scene, we have to talk about NPU when we write about Djokson’s many ingenious creations. For example, Lady mantis wears pieces of cloth that can only be from either Scala or Belville — two old LEGO themes full of large dolls. It’s just hard for me to pinpoint which cloth piece is from which. However, the eye sockets of each mantis are the shoes of said dolls, with the good old minifigure arms wedged inside them. Other pieces include the rubbery Krana and Kraata from Bionicle, which Djokson uses in the head and stomach respectively. I also enjoy the use of the fantastical key element from LEGO Elves, which gives the elbows a spindly look.

I guess you could say Djokson’s builds make me… lose my head.

And up from the ground came some bubblin’....well, I’m not sure exactly.

It’s a science fiction trope most of us are familiar with – the rumblings under the ground subside for just a moment. Then, suddenly, there’s an eruption and not only do you have have to deal with a an outflow of lava, but also the emergence of some truly terrifying underworld creatures. Bart De Dobbelaer captures just such an event in this stunning creation, aptly named Emergence. The beasts include some unusual part choices, including one of my absolute favorites elements – the X-Pod container. But obviously they’re just part of the scene. The spewing lava is captured by a wealth of transparent orange elements, including Dimensions base discs. The techno-organic vent provides a great contrast to the mayhem elsewhere, while still adding a great deal of mechanical texture. And then Bart had to go and add lighting effects. Because if you’re going to build at this scale, you might as well go all in.

If you want some great contrasting color to this build, check out another of Bart’s creations: Trace Initiated. Or maybe just peruse some great Sci-Fi builds from creators from around the globe.

This cat will leave more than just a scratch

This ferocious feline comes from the talented builder, DanielBrickSon. The beast is named “Meara the Metalworks Tiger” and has fought through the first round of the Biocup competition, allowing its creator to proceed to the next stage. The hulking form of the tiger is made up of a great variety of Bionicle pieces, all applied to create beautiful shaping throughout the model. In order to portray the twisting spine of the build, DanielBrickSon has used Barraki crossbow pieces as their rubbery texture allows them to bend.

Rare armoured mask parts are used to form the tense shoulders and areas of the upper back legs. The model is reminiscent of Battle Cat from He-Man, if the cat went fully armoured. There’s also a 360 spin so that you can gaze upon all of the model’s glorious details.