About Chris Doyle

Chris has been involved in many parts of the LEGO community for over twenty years, and has been building most of his life. A love of transparent bricks and pop culture combine in most of his creations, which tend to be pretty large scale. His website, Reasonably Clever, featured one of the longest running brick-based webcomics, as well as one of the first LEGO-themed avatar creators. His photographs and creations have appeared in several books.

Posts by Chris Doyle

TRY again (More drunken LEGO building by Chris Doyle)

You know what isn’t supposed to mix? LEGO and booze. But sometimes it does. And wow, can it be a lot of fun to watch. Recently, I shared my tribute to the TRY channel’s drunken LEGO building. It featured one of the three pairs of TRYers who attempted to build sets while smashed out of their gourds. The people I depicted enjoyed my creation, but it didn’t end there. One of the other people in the video, Mary-Claire, asked if I could build her and Lolsy Byrne next. So…here we are.
MC and Lolsy’s attempt at building Yoda’s Hut (75208) didn’t quite go as smoothly, but I think it’s fair to say they had a great time anyway. Even if MC was momentarily confused if their set was from “Sky Wars” or some other franchise… (To be fair, she was really drunk!)

I ran into a couple of challenges in making recognizable likenesses. Lolsy’s nose ring (made from a minifigure gold ring) was difficult to position. Luckily the 2×1 curved slope of her nose has a notch that allowed for the ring to sit on the top of a 1×1 Technic brick built sideways off of her lip. That allowed enough of an offset to have at least almost half of the ring “exposed” below her nose, and flush with the rest of her face.
Mary-Clare’s mouth also gave me a bit of trouble. Eventually I found a combination of 1×2 and 2×2 plates for her lips and a 1×2 rounded plate for her teeth that worked. The mouth assembly is “studs down”, so the connection point on the underside of the 2×2 plate creates a nice suggestion of a tongue…an unexpected but welcome side effect.

I also wanted to add a little something extra to this second build, so I decided to animate a bit of the video. (From about the 6:00 mark). At that point, Lolsy has a few choice things to say to anyone who has a problem with their Star Wars knowledge…click on through to see her LEGO avatar in action!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A collectible alternative for those on a tight budget

It’s common knowledge that LEGO bricks aren’t the most inexpensive things in the world. We love them, obviously, but they’re something you have to do a bit of planning to afford. What then do you do when LEGO introduces something very cool like a giant wooden minifigure with a high-end price tag? Maybe you’re lucky enough to find room in your budget for one of your own. Or, maybe, you look for other creative solutions. Ryanzilbn found a great way to enjoy things while still keeping a little cash in their pocket.

This minifigure-scaled-minifigure (There’s a concept for you!) has the signature tan body and yellow hands of its wooden counterpart. The brick-built packaging closely matches the released version, with bright colors, a recessed collection of bricks, and even a representation of the informational booklet.

I may have to try building a copy of this creation for myself. It’s either that, or hope that Santa is really generous this year.

I am Plastic Man! ...err, I mean...I am Iron Man!

It’s fair to say that the Marvel Cinematic Universe (MCU) has had its share of ups and downs over the years. To many, 2010’s Iron Man 2 is one of the lower points. Personally, I think it’s just fine, and there are some standout moments that make it special. In particular, I loved the inclusion of the comic-book classic “Suitcase Armor” of the Mark 5. I had thought that the “reality” of the MCU would keep Tony Stark from ever having a portable version of his armor, and being proven wrong tasted sweet indeed. Imagine my delight, then, when Brickatecture moc industries revealed their amazing, wearable, and 1:1 scale helmet from the Mk 5.

Made from around 1,500 elements, it took nearly two years of design tweaks to bring this beauty to life. The combination of wedges and plates gives an appropriately angular feel to the red sections, while the face plate makes use of curved slopes to smooth things out where necessary.

If you’re interested in more super-heroic wearable LEGO, be sure to check out Brickatecture’s Atom suit. If we ever get a DC/Marvel crossover event, an Atom/Iron Man mash-up seems likely!

Ringing in the holiday season

When you know what you’re doing, LEGO elements create some very interesting patterns and shapes. Builder Azurekingfisher knows what they’re doing. In mobile sculpture, rings and snowflake-like shapes are created from a complex repetition of plant leaves in a variety of hues. Add Technic rods and connectors to hang them from, and you have an art installation just waiting to happen.

Take a closer look at this wintry LEGO mobile

There’s something fishy going on here.

There’s a lot of beauty under the sea. There’s also a lot of creepy looking fish. jarekwally brings us a bit of both in this underwater vignette. Created around two tricycle frames, a bone-white fish swims among a colorful coral reef. I’m not sure you’d want to come face-to-face with whatever breed of fish that is, but the rest of the scene is certainly somewhere I’d like to visit.

This whole build abounds with creative part usage. The fish continues it’s unusual construction with minifigure wings, Mixel eyes, and cattle horns. Each plant in the reef has it’s own clever combination of elements, too. There are multi-colored flower-edged round plates, 2×2 round petal bases, and even purple 2×2 gears.

Floats like a butterfly. Possibly also stings like a butterfly.

Ah, Novvember. The time of year when all the forked-front spaceships come out to play. It’s always a lot of fun to see what new takes on the Vic Viper builders will come up with. Sheo is among those who took a stab at it, and delivers a ship that really has that “wow” factor. Butterfly Racer is all about the curves.

White hot air balloon panels create an hourglass shape that is surrounded by undulating curves in red. There are dinosaur tails and inverted arches, along with a mixture of curved slopes. The curved shape is also emphasized by the repeated use of round tiles in white, red, and black. All in all, this is a lovely craft that pays tribute to the themes while still bringing a new and distinctive style to them.

Baby, it’s cold outside

I think Khan said it best: “Do you know the Klingon proverb that tells us revenge is a dish that is best served cold? It is very cold in space.” Yes, in addition to being the final frontier, space is also pretty darn nippy. Builder Seb71 celebrates that icy perspective with the clean and crisp lines of Siberia. The subtle curves on the edges and wings keep things from feeling boxy, even with decoration that is very angular. And let’s talk about that deco work! The choice to keep things greyscale gives the stripes at the front great contrast to the white of the hull. The technique used to make the stripes is worth a closer look, too. Clever use of multi-directional building is used to align cheese slope tiles to get those sharp angles.

The real treat, though, is the blocky gradient on the rear wings. It’s a tiny mosaic that gives a lovely fade from black to white, blending the colors used elsewhere on the ship into a harmonious whole. And it just looks so swooshable…

It’s not always about the spaceship.

Don’t get me wrong; I love LEGO space ships. The more swooshable a build, the happier I am. Sometimes though, it’s not about the ship, but the people who keep them flying. In Repair Yard, builder Inthert shows us a slice of life from the mechanics who keep things moving. (And, apparently, the cat that helps out, too.) This model was created for a contest focused on the creative use of grill tiles, and there’s certainly several great examples of that here. Note how they are used with crossbows in the radar array on the right, as texture for the crates, and the steps in the stairs on the gantry. Look even closer, and you’ll see them as part of the engine detailing (coupled via minifigure handcuffs, no less) and the work stations in the background.

The rest of the build is fun, too. I like the crack in the paved area created by keeping a slight gap between sloped elements, and the choice of lilac for the plant stems gives the whole thing a nice extraterrestrial vibe. I do wonder, however, if I’m reading the story of this vignette correctly. It sure looks like the mechanic on the ladder pushed that shiny red button, giving the other tech a face full of soot from the engine. Surely Inthert would be nicer to these characters, right?

Retro Transformer goodness

I remember when the first wave of Transformers reached the US; these toys were an instant must-have for everyone I knew. (And woe betide anyone who got to Toys-R-Us a few minutes late and had to settle for the not-quite-as-cool “Go-Bots” toys.) Alex Jones (aka Orion Pax) has been transporting us to those good times with a selection of Generation 1 Transformers, and he’s back with another round of stellar creations. Each model is a combination of clever building techniques and detailing, with a bonus of great retro presentation.

This is not the first time we’ve seen an amazing LEGO version of Bumblebee from Alex. (Has it really been ten years?) This upgraded 2019 version makes use of a lot of parts that weren’t around in 2009. Bumblebee’s vehicle mode is clearly based on LEGO set 10252 Volkswagen Beetle. There are a few design tweaks, but the beetle’s shaping is instantly recognizable. The yellow recolor alone would be impressive enough, but the fact that it transforms as well? That’s just nutty levels of awesome.

Alex didn’t stop there, though. There’s a giant selection of transforming goodness!
Continue reading →

A new twist in motorcycle technology

One of my favorite builders, Sheo, is back again, this time giving us a custom motorcycle a unique twist. The futuristic Infinity bypasses the usual wheels, and even forgoes sci-fi hover technology. Instead, a Möbius strip winds its way through the body, providing a drive train that, by definition, just doesn’t quit. This infinite drive is backed with infinite power from the on-board fusion cell, letting this bike go, in the words of the builder, “where no one has gone before!” (We may have seen a similar quote somewhere else before.)

From a LEGO perspective, the larger scale to this build gives us some really nice detailing. The “Fusion” logo on the central body is brick-built, making good use of tiles and cheese slopes. The handlebars have some interesting part usage like minifigure sports helmets and rubber tires on the end of the grips. The headlight covering made of 6 x 6 x 2 windscreens provides a very aerodynamic shape to the front, matching the rest of the sleek styling.

I’m only happy when it rains

Photo-realism is very hard to achieve when you also include LEGO minifigures as the protagonists. Sure, LEGO enthusiasts are comfortable with the not-quite-human proportions, but there’s still that feeling that you’re looking at, well, toys. Not so with the work of Lego_nuts. This builder is also a photographer who knows how to transform a well built set into a stunning composition that feels like a frame from any on-screen Marvel movie. In Raining Battle, Iron Man and War Machine face off against a horde of alien nasties, amid the backdrop of a drenched New York alleyway. Rain and water are everywhere, diffusing the light and giving an air of menace to the scene as a whole.

The alley’s LEGO details include trash cans and waste bins, a newspaper box, and plenty of railings and fire escape ladders. But the vertical span of the buildings is what gives this image such a sense of depth. It feels like our heroes are at the bottom of a very deep hole. I’m sure they’ll win, though.

We recently featured another beautiful LEGO photo from this artist, featuring the entirely different fantasy world of Harry Potter.

Booze and LEGO don’t usually mix this well

In these dark times, I find a lot of comfort in watching silly YouTube videos. In heavy rotation for me (builder Chris Doyle) is The TRY Channel. There, a bunch of Irish comedians react to odd foods and activities. It’s really funny. Sometimes the challenges involve a lot of alcohol, and thus feature drunk Irish comedians. This, to me, is even funnier. Imagine my delight then, when TRY released Drunk Irish People Try Building LEGO Sets. I’ll give you a quick recap of the episode: It doesn’t go particularly well for most of them.
Two of the TRYers, though, Dermot Ward and Bláithín de Burca, manage to get through more than two-thirds of the build of the 76119 Batmobile set. I felt really bad for them when time ran out and they had to stop. So, being the sort of person who builds with LEGO myself, I thought I’d make a little alternate-reality ending for the video where they did finish.

This was one of my first times building characters in the likeness of “real people”, as opposed to robots or super-heroes. I think they turned out pretty recognizable. Dermot likes to joke that he has an oversized head, so there are a few extra bricks in his forehead. His mostly-unbuttoned plaid shirt, though, was a real pain at this scale. I used a combination of headlight bricks and 1×1 tiles to get a suggestion of the pattern. Creating a version of Bla had some challenges as well. I used rubber bands for the straps on her top, and digging into my sticker stash to find something to use for the decoration. A pair of chrome grill tiles and some Brickheadz glasses complete her look. I also built a tiny Batmobile, Batman, and Joker. Because context matters.

The best part of this build for me was when the TRYers reacted to it. It’s super gratifying when a bit of fan art gets a big thumbs up from the people depicted in it. And Mary-Claire wants me to work up versions of her and Lolsy next. That sounds like something I’m going to have to…Try. (Sorry. I couldn’t resist.)