Category Archives: LEGO

You’d probably expect a lot of the posts on a LEGO website like The Brothers Brick to be about LEGO, and you’d be right. If you’re browsing this page, you might want to consider narrowing what you’re looking for by checking out categories like “Space” and “Castle.” We’re sure there’s something here that’ll fascinate and amaze you.

The Making of The Fellowship – Catching up with Cathedral of Bricks [Interview]

When we first encountered the LEGO castle creations from Luke, who posts on Instagram as cathedralofbricks, we were immediately struck by the builder’s skill with medieval architecture and dramatic landscaping. Since we last spoke with Luke, he has gone on to win two top awards in the Summer Joust competition and sailed from castle territory into pirate-infested seas with a stunning tall ship. This month, Luke debuted his biggest model yet, a tribute to Tolkien called “The Fellowship.” It’s such a magnificent build, we had to follow up with Luke about its creation.

our Interview with Luke and illustrations of his work and inspirations follow

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Moko’s latest CUBE-ROBO squares off against Halloween

Mecha master Moko gets into the Halloween spirit with the 14th entry into the builder’s CUBE-ROBO series. At first glance, it’s a cute cubic Jack-O’-Lantern, but like the 13 bots that precede it, the model holds a secret. With a few deft tugs and swivels, it transforms into an impressive and articulated mech!

As Moko explains in their blog, the model began with the cube form, so the robot’s humanoid frame inherited the triangular “head,” which lends the mech an insectoid appearance. Moko leans into the bug-quality with pincher claws.

Fourteen transforming cubes is impressive, but it’s just the start of what Moko dreams of being a set of 100. Although the builder notes that at the current rate, getting to that ambitious target will take more than one lifetime. Here’s hoping Moko is able to square that dream!

You can see Moko tranform the model in real time here:

LEGO Haunted Houses of all sizes to usher in Halloween Week

Builder Kat (klegofan3000) loves celebrating holidays with LEGO creations and challenges, especially Halloween! Over the past three years, she’s built a haunted house or two to ring in Spooky Season. Our favorite is this maniacal mansion brimming with teeth, eyes, and tentacles. The combination of lavenders and greyscale is such a fun Halloween palette and is shared across more of her builds.

Kat’s latest haunted house is a more grounded affair with just a hint of purple. Here, she showcases her talent for mosaics (Kat’s regular star of #mosaicsonmonday) with a cheese slope design under the door and a deft use of tiles and textures throughout. The house is in line with the builder’s other architecture builds, like this modern beauty.

Speaking of mosaics, Kat also also brings her favorite subject and colors to two-dimensions for an all-tile take. Happy haunting,

Finally, we present Kat’s smallest houses of all in this clever forced perspective scene from Hocus Pocus created for the Halloween Habitats challenge.

We’re big fans of this massive minifig and their supersized LEGO spaceship!

LEGO’s up-scaled minifigure models (or MiniBigs, as I like to call them, which is going to catch on any day now I’m sure) have proven to be a popular concept for creative AFOLs to run with. Pascal Hetzel must have seen our April Fool’s post and created his own big classic space minifigure. But, not content with merely creating a massive minifigure, he’s built a supersized spaceship to go with it! And true to Neo-Classic Space form, it’s got plenty of greebles and texture, making it far more than a simple up-scaled model. If you can call such things simple, that is!

This thing is so big, I’m sure it would’ve reached the 100-stud long threshold required of SHIPtember builds. If you want to see more enormous LEGO ships, be sure to check out our archives!

Don’t just wing it, this tiny Star Wars Y-Wing is a force to be reckoned with.

“Why not build a micro Y-Wing on Yavin IV?” -is likely the question LEGO phenom Pascal asked himself just before starting. As he was tinkering with the Y-Wing, he then went on to build a tiny Yavin IV hangar for it too. But don’t let its size fool you – this Y-Wing packs a punch, proving that even the tiniest of rebels can take on the Empire. So long as the Empire is also micro-scaled. All kidding aside, the proportions and shaping are spot on and on par with great Minifig scale and even UCS Y-Wings we’ve seen, proving that you don’t need a hangar full of LEGO bricks to impress us. The Force is definitely strong with Pascal.

Taxidermy is so much easier with LEGO bricks

There are many important events on the LEGO calendar, ranging from month-long build challenges to contests and competitions. But arguably one of the most important is the annual Creations for Charity drive, where LEGO builders come together to raise funds for charity through their builds. Daniel Olvera has thrown this taxidermied centipede into the ring for this year. Taxidermy seems like a much easier job in LEGO; much less gruesome. And no matter how many small LEGO elements you use, they’re surely easier than trying to coax an insect into a frame without damaging it further!

LEGO and dinosaurs: Good. LEGO and zombie-fied dinosaurs: Great!

The twelve-year-old me loved dinosaurs. Who am I kidding? The version of me that’s more than a half a century old with an aching back also loves dinosaurs. Zombie-fy said dinosaurs and build it in LEGO and you pretty much have reached nirvana. That’s what is going on with moptoptrev’s new creation called Primal Plague of Madness inspired by the Primal animated series.

The builder is on a spooky streak of late. Get a load of this Mothman by the same builder. I think we have a budding friendship here.

Xethral, Legacy of the Vanished, where ancient secrets slumber

In the heart of the jungle, an uncanny group of structures pierces the canopy like jagged teeth. Bart De Dobbelaer’s Xethral, Legacy of the Vanished is a haunting LEGO creation that embodies what used to be a shimmering power source of a lost civilization. He states that legends tell that Xethral’s scholars learned to channel this energy to sustain their cities, illuminate the night, and power machines far beyond modern understanding. However, when the stars aligned against them, a great silence fell, an entire culture was swallowed by vines and mist. Now, only their depleted power sources and crumbling crystal towers remain, silent witnesses to a brilliance long erased from history. It’s just the kind of esoteric lore Bart is known for. As with most of what he does, it garners more questions than answers. But at perhaps great risk to our personal well-being, we come back to ask more questions.

Hey you guys! LEGO reveals 21363 The Goonies, complete with 12 minifigures and lots of booty traps [News]

Goonies never say die. Especially when there’s still a chance for a comeback in LEGO form! Available on November 1, LEGO Ideas 21363 The Goonies turns the beloved ’80s classic adventure film into an elaborate 18+ playset based on a fan design from Vaggelis Ntezes. One side of the model shows One-Eyed Willie’s pirate ship, while the other retells the story of the film as a series of connected vignettes. The set contains a whopping 12 minifigures, including the ensemble of teen actors who would go on to star in films like Lord of the Rings, Avengers: Endgame, Everything Everywhere All at Once, and Tales from the Crypt Presents: Bordello of Blood. We love the film, but as Cyndi Lauper asks, is R the Goonies good enough? Have a look at the official reveal and read our thoughts from seeing the set in Billund last month.

LEGO Ideas 21363 The Goonies | 2912 Pieces | Available Nov 1 |US $329.99 | CAN $379.99 | UK £269.99

This is OUR time to read about The Goonies!

Builder Aesstog mixes Bionicle, bricks, and textiles to create stunning Souls-like Knights and Nightmares

The dark fantasy aesthetic of games like Dark Souls, Elden Ring, and the Witcher have cast a huge shadow on the minifig community in recent years, but perhaps the most Souls-like character models I’ve ever seen are at constraction-scale. Noted knight enthusiast and “occasional moccist” Aesstog has been creating Bionicle-based characters inspired by FromSoftware’s aesthetics. The secret to their success? Textiles. Fur, fabric, and even knitwear serve a dual purpose, shrouding sharp angles with soft shapes, and providing a contrast that lets specific armor pieces pop. The effect is incredible. Just take a look at the builder’s latest creation, this Lycan Knight.

The Lycan Knight’s helmet comes from the shoulders of Tahu – Uniter of Fire and the head belongs to Panthar from the Chima buildable figure line. Of course it’s the fur, not an official LEGO element, that brings the character to life.

More of Aessog’s incredible Souls-inspired character follow

Green antlers for leaves. Grey trunk potted in a tire. It’s LEGO Bonsai.

Isaiah Kepner has always been a strong LEGO arborist, finding new ways to create bark, branch, and foliage from interesting parts. After a busy 2024, the builder has been on a MOC hiatus, but Isaiah found time to get back to his roots with a fabulous bonsai pine. This tree uses almost exclusively green antlers for the leaves, inspired by this tree by Ryan McBride. The greebley tree is full of fun (and often illegal!) connections. It reminds me a of Niina L’s greeble tree. Using an inverted tire for the pot adds a nice contrast to the hard angles in the tree trunk.

If you’re interested in experimenting with green antlers in your tree builds, Isaiah shares a tutorial here. I also shared my experiments with the leaves earlier this year.

Poké-builders celebrate the release of Pokémon Z-A with Mega Evolutions in LEGO

If you want to be the very best trainer, it’s not enough to collect ’em all anymore. It’s not even enough to evolve your Pocket Monsters. These days, to be the best there ever was, you have to MEGA Evolve those Pokémon. In celebration of last week’s release of Pokémon Legends: Z-A on the Nintendo Switch, nine LEGO building Poké-fans teamed up for the #megabrickevolution collaboration, rendering the new upgrade forms of some of their favorite monsters.

First up, from Matt Goldberg, we have the Mega Charizard X, an evolution of Charmander so smoldering with power that he burns blue. The head is wonderfully sculpted and the body has the right mix of cute and fierce. My favorite technique is the use of Ben 10 scales on the underside of the tail, a part I couldn’t recognize without reading Matt’s description of the build on his blog.

@margits_mocs dares to build the Mega Evolution of Pokémon 303, Mawile. This deceptive critter uses its cute face to catch foes off guard, then chomps them with the steel horns on the back of its head that form a fearsome maw. Margit’s model reallly captures the nightmare potential of that second mouth.

Meet more Mega Evolution MOCs after the break