I don’t always go in for renderings of LEGO models, as I often find them lacking compared to real photographs of brick-built creations, but these renders by the fantastically-named Awesome O’saurus are terrific. Over the past few months, he’s been slowly churning out some lovely microscale spaceships in the hard sci-fi vein. Here are his latest two, the Sumerset, a patrol ship, and the larger Kettler, a colony ship.
Zemata gives us a look at the decidedly otherworldly: a creature from a planet where insects have the mastery. It’s a fantastically created diorama, with vivid colors and an interesting shape. Plus, it lights up.
Here’s a fun scene by Mattius Xavier. I always love a bit of good forced perspective in a model, plus I don’t see that old school dragon nearly enough. This is a very nicely composed shot, and shows what you can do without any fancy photography tools, and only a bit of clever building and skill.
Here’s Jonas’ (Legopard) take on Weathertop. I always enjoy seeing a fan’s version of a movie/book location that LEGO has already made into a set. For obvious reasons, it’s unfair to expect LEGO to produce a decently priced set that can match the complexity of what fans build, but nevertheless, it would have been fantastic if the official set had been anywhere near as cool as this one.
EDIT (AB): Yes, yes, we blogged this last week, too — but I like Chris’ contrast with the official set, so enjoy this one twice, at no extra cost to you!
David Hensel (Legonardo Davidy) is churning out creations this week, with at least six decent dioramas in as many days. First up is this great little scene. The mounted Wyvern is what really makes this one shine.
Also there’s this gorgeous mill scene.
Be sure to check out David’s photostream to see the rest of his beautiful dioramas.
Carl Merriam brings us this beauty from back when trucks were still only for farms and businesses. We’ve featured countless antique vehicles here on blog, but clever people like Carl are always innovating new and interesting ways to build them, and for all its simplicity, this is one of the nicer ones I’ve seen.
The summer wave of sets is here, and LEGO has focused its Tolkien license back onto the Lord of the Rings trilogy, while we wait on the new Hobbit movies. The Council of Elrond is the medium sized set in this wave at $29.99 USD, with 243 pieces.
I find it interesting that LEGO chose to capture this moment from the series in playset form, because although the Council of Elrond is of paramount importance in the ultimate narrative, it’s basically a glorified committee meeting. Not exactly the stuff of Saturday morning cartoon action on which LEGO playsets generally focus. Nevertheless, LEGO has managed to fit in some play features here. The boxes for this summer wave have been redesigned from last year’s Lord of the Rings sets, and I love the new look. The right end of the boxes features a orange-tinted map of Middle Earth, which extends onto the closed flaps. This gives the boxes quite a striking look on the shelf.
Now down to the set itself. Opening the box will dump out two numbered bags, the instruction manual, and that ever-present sheet of stickers. Fortunately my sheet wasn’t crumpled, but I’ll say yet again that LEGO needs to be putting sticker sheets in some sort of protective material. The stickers are for the 3 chair backs, and the Eye of Sauron. The Council of Elrond builds two small structures from Rivendell, the home of Elf-lord Elrond, and his daughter Arwen. The first bag builds the council room, which in the nature of the elves, is more of a patio than a room, being open to the air and shaded by a tree. It includes 3 chairs around a central plinth, where the One Ring resides during the council. The only action feature in the set is also built here. It’s a minifig flinger located in the floor next to the plinth. It’s used to recreate the scene from the film where Gimli brashly gives the One Ring a good whack with his axe, and is sent sprawling backwards. If you’ve watched The Fellowship of the Ring recently, you may also recall that the screen flashes to the Eye of Sauron for a split-second as Gimli hits the ring. In the floor when the fig-flinger lifts up, there’s a red slope that’s stickered with the Eye of Sauron, so you can briefly glimpse it before the floor shuts again. It’s more than a little corny, but also an amusing interpretation of the film into a playset. I tried it, and it actually flings Gimli quite effectively.
The second bag builds the remainder of the set, which is a small segment of a roofed structure. It contains a removable weapon rack for holding Arwen’s bow and Elrond’s spear. This part looks really lovely, using a mixture of white, dark tan, and light grey. It includes another tree, and this segment clips into the adjoining council room segment with two Technic pins. This building also features the first ever appearance of the new Gothic half-arches, which are a long yearned-for piece for Castle builders everywhere. Sadly, this new piece follows suit with the newer design of the full arches, and uses thin walls that disallow studs being placed on the underside, a common fan technique. Other interesting pieces in this set include the first appearance of dark orange large leaves, which in combination with the recently released dark red leaves puts 
fans well on their way to making an autumnal forest. There are also olive green small leaves here, which aren’t new, but are still hard to find. All told, there are 4 white half-arches, 3 dark orange large leaves, and 5 olive green small leaves. Personally, I’ll be buying this set in droves, just for the leaves and arches.
There are 4 minifigs in this set: Elrond, Arwen, Gimli, and Frodo. This seems a very logical selection of minifigs. Elrond must be present–it is the Council of Elrond, after all. And Frodo has to bring the ring. And Gimli’s got to go flying to give the discussions some play value. 
Arwen might be the odd character out, but given her limited role in the series, this is probably about the most logical place for her to show up, short of a Black Rider chase set or the Coronation of Aragorn. The figs are all high quality with front and back printing. Gimli and Frodo are identical to those found in previous sets, so I’ll skip over them. Arwen is a fantastic addition to the female medieval population, and her dress is generic enough to pass for any lady in a Castle setting. Both Arwen and Elrond have rubbery hair, with painted ears. Elrond has a meticulously detailed gold printing, and a terrific double-sided cape. The outside of the cap is dark red, with a painted tan inside. I don’t even remember the last time a set included a two-sided cape, though I know it’s been done before.
All in all, this a good set for fans, or parts collectors. I can’t imagine that there’s a lot here to be excited about for kids who aren’t major fans of the movie, since the structure isn’t even defensible. Still, each of the weapons in the set (except Gimli’s axe) have an extra included, so it’s not a bad weapons pack, plus there are 2 extras of the 1 Ring (good thing Sauron didn’t have backups). It seems like a big opportunity missed not to include a statue with Narsil and maybe a shield inside the building, though. Still, I expect most of the lovers of this set will be people like me looking for those new arches and leaves.
The_jetboy is taking the concept of a “seed part”* to a whole new level. He’s used a single piece, the wide track link, 92 times to create this crazy microscale citadel. It’s not often I find visually interesting models made of only one part type.
*A seed part is single part type that must be used in a model, ideally in a highly ingenious manner. “Seed Part” contests are a staple among fan sites. If you’re not as crazy as the_jetboy, you also use other parts in conjunction with the seed part.
French fan Théo‘s latest model depicts a terrifying past filled with adventurous biologists, mighty dragons, and a fair bit of Steampunkery.
Spanish LEGO fan Fernando (Sheepo) shows his crazy engineering skills with this beautiful recreation of a Caterham 7, a small British sports car. Technic builders never cease to amaze me with the amount of functionality they can build entirely with brick and still pack into a small frame, and this model is at the top of the game. It’s got all the LEGO R/C car bells and whistles, including disk brakes, a full transmission, and complete suspension.
Sometimes relatively simple scenes can provide the most opportunity for showing terrific quality. Take, for instance, this beautiful diorama of the Roman invasion of Britain by James Pegrum (peggyjdb) which is really just a bit of shoreline with some soldiers. I’ve seen the trans-blue 1×1 round plates used as water many times, but James has made better use of it here than I’ve seen previously, adding waves and some flecks of green, and he also extends that technique to make an interesting gravel beach. James also puts in great little details such as the Romans wielding iron-tipped spears, while the barbarians fight with LEGO’s older, solid-color spears.
From Polish builder Lukasz Wiktorowicz (LL) comes a scene of daring men following in the footsteps of the great Trojan warriors of yore, slipping in under the enemy’s watchful eyes in disguise. Ok, well, actually, it’s just Pintel and Ragetti from Pirates of the Caribbean masquerading as women, but it makes a smashing good LEGO scene, brought to life with clever parts usages and some great forced perspective.
