Monthly Archives: March 2009

I just can’t stop building alien stuff

My latest is an interplanetary probe. I wanted to stick with the mix of angles from equilateral triangles and more simple bilateral symmetry at a smaller scale than many of the other creations in the theme. I also wanted to do something a little bit different with the engines.

Interplanetary Probe

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The Northland Grimmhaven

The Northland Grimmhaven display from The Brick Time appeared on Brickshelf recently after being displayed at an exhibition in Berlin. This diorama no doubt has much details packed in, especially the the robust plaza at the back.

You can find the builder’s recently created Flickr gallery here.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

The Powerpuff Girls

Sugar, spice, and everything nice, these were the ingredients chosen, to create the perfect little girls, but Professor Utonium accidentally added an extra ingredients to the concoction–Chemical X. Matt Armstrong (Monsterbrick) has added another ingredient to his miniland scale rendition of the Powerpuff Girls, LEGO. I think he did an especially nice job on the shoes.

LEGO Powerpuff Girls

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Jehkay’s Defense Drone

While Jehkay‘s new defense drone pretty much looks like it’s just a couple of boxes from above, it’s actually a pretty cool creation. Underneath the two boxes there’s a cool array of weapons and equipment. The eye or whatever it is in front is pretty cool too. He has also found a very interesting color to use for the background of these shots, I rather like it.

Defense Drone

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Drinks are on Yoder at the Last Chance Saloon

Mike Yoder (MrYoder) envisions a dystopian future on the edge of explored space, where “an old exploration outpost is now a favorite haunt for traders, smugglers, outlaws and pirates.”

The brick-built lettering in Mike’s signs is truly excellent.

Lots more photos of this great scene on Brickshelf.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Photos from 7th annual clickbrick Original Model Contest now online

Although winners of the 7th Original Model Contest (sponsored by Japanese LEGO specialty store clickbrick) won’t be announced until March 7, some great photos of the LEGO creations entered in the contest are now available.

Entrants are free to choose their own theme, but are restricted to 20×20 studs and 30 cm tall, and they can’t use LEGO Baby/Primo, DUPLO, MINDSTORMS, or custom parts.

“Goldfish Balloon” by Sachiko Akinaga:

“Howl’s Moving Castle” by TEN:

“In Space” by Tora-Chichi:

“Memories of a Dream” by Mokuami:

See lots more photos in Sachiko’s Brickshelf gallery.

(Via LEGO-KEI and Let’s LEGO.)

Past coverage of this event here on The Brothers Brick:

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Dead end of the track

Maciej Drwiega from LUGPol presents a differently flavored train creation, one that depicts the more run-down end of things. Check out this small scene of a decaying flatbed train on an abandoned rail.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Minifig? Microfig! More info about Reiner Knizia’s LEGO board game

LEGO have just passed on a series of images promoting the new series of award-winning board games, including Ramses’ Pyramid by Reiner Knizia. The microfigures are utterly adorable and the tile with stud in center should be a great piece for all builders.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Five things you may not know about LDraw: Guest editorial by Matt Wagner

Today we feature a guest editorial by Matt Wagner on virtual building. As some of you may have noticed I share a lot of these thoughts with Matt and find the prejudice against LDraw to be quite thoughtfree.

Anyway, I’ll pass you over to Matt.

Thanks to Andrew and Tim for the chance to share some of what I know about LDraw. First off, I want to make it clear that by no means do I represent the entire LDraw community; I’m only one of many virtual LEGO builders out there.

What I’d like to share is this:

Five things you might not know about LDraw:

  1. LDraw is free. Anyone can download and use LDraw (and MLCAD and all of the associated programs), and the most often-used rendering program (called POV-Ray) used to create the 3D images is also free. Get started at http://www.ldraw.org/Article126.html
  2. LDraw’s parts library is both unlimited and limited. Anyone who’s used the program knows that the extensive part library allows you to click and drag into your virtual model to your heart’s content. But since LDraw is not officially licensed by LEGO, all those parts files are created by everyday users out of polygons and groups of polygons called primitives. And since nobody’s getting paid for their work, the creation of parts is slow and up to the community. LDraw.org takes these parts and releases official parts updates periodically after ensuring that each part meets their quality requirements; however, no official parts updates have been released in over 5 years. Parts that are created in the meantime get placed in the “unofficial” parts library on the LDraw website, but have varying degrees of quality and mistakes until they are approved as official, and some parts that you might hope to find simply haven’t been created in LDraw yet. For example, the minifig heads with facial expressions other than the benign-looking smile, as well as all of the new male and female hairpieces, all pieces that have been available for years now in real life LEGO pieces, are still unavailable in LDraw.
  3. LDraw has its own unique challenges. It is true that gravity and tension are not something you need to worry about in LDraw: as the program is basically placing bricks in a 3D space, it is possible to place a 2×4 brick going right through another 2×4 brick, something virtual builders call “impossible building.” This may be why some people consider LDraw to be less of a challenge than building with actual LEGO pieces. But building pieces at an angle, something that may require only the positioning of a hinge piece or the click of a bracket in real life, is much more difficult in LDraw. Anything built using SNOT is harder than in real life. Large models become very cumbersome in LDraw. Doing these things is possible, but they require complicated extra steps involving multi-part files and careful aligning of connections and angles.
  4. Publishing LDraw models can also be a challenge, something that can become more complicated than photographing with a lightbox. LDView is a great program that creates a clean-looking image of your virtual moc in seconds. But for those who want to approach the realism seen in some of the virtual modelers who’ve been featured on Brothers-Brick before, you need to learn how to use POV-Ray: a free ray-tracing program. POV-Ray allows you to place light sources, floors, skies, backgrounds, and other tools to enhance your model’s presentation. POV-Ray also has a feature called radiosity which is something that adds a lot of light and realism to a render, but also stretches out render times to several hours or even days. There are a few tutorials out there on how to use some of these advanced features with POV-Ray; Brichkhelf user Koyan’s tutorial is one that I have used.
  5. Virtual LEGO and real-life LEGO can complement each other. Say you’re wanting to build a new model, but you don’t have all of the pieces you need. You want to make sure you can fit everything together the way you’re imagining. You can build it in LDraw first to best visualize your model. Then you know exactly which parts you need to order on Bricklink. Or here’s another scenario: you’ve just built an amazing model out of pieces that you have, but another contest comes along that requires the use of pieces that are tied up in that last creation. You hate to have buy new pieces this time, so what do you do? Build it in LDraw and save a virtual version of your model, so that you can archive it forever and free up those precious bricks. Thanks.

I hope I’ve helped broaden your views on LDraw and virtual LEGO in general, and hopefully I’ve dispelled some of the misconceptions that cause virtual entries to be prohibited from competing in LEGO contests.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

In case of LEGO emergency, break glass

Have you ever broken a fingernail trying to pull two LEGO bricks apart? Ever resorted to a butter knife? Teeth? What you needed was a Brick Separator.

For all those building emergencies, Andrew Summersgill (Doctor Sinister) has the solution:

Not coincidentally, Andrew is also running for chairman of The Brickish Association. Here’s a campaign poster that perfectly sums up my own approach to LEGO — FUN is not a four-letter word!

Hey Andrew, I’ll be expecting that wire transfer for £19,999,999.99 into my offshore account any day now…

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Chasing Boulderax on two wheels

The fighter by Geoff Herndon (Tekka Croe) that Dan blogged yesterday may be spikier, but I’m a sucker for small and adorable.

This Power Miners bike would make an awesome impulse-purchase set.

EDIT: Oh look, this drilling unit by Kevin Fedde (Crimson Wolf) also fits the post title!

EDIT 2: Okay, what is up with all the two-wheeled Power Miners vehicles? Huh, Rocko?

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Announcing the FBTB Podracer Challenge [w00t!]

March is apparently the new December — at least in terms of the plethora of LEGO contests happening at the same time.

From Bricks to Bothans has just announced the Podracer Challenge. The challenge is to create an original podracer (not one featured in Episode I or in the Expanded Universe) like the Pre-Classic Space and 3vil podracers featured in the graphic above.

The prizes:

  • First Prize: Darth Vader’s TIE Fighter, Chrome Darth Vader, and Chrome C-3PO
  • Second Prize: Chrome Vader or Chrome Threepio – your choice
  • Third Prize Chrome Vader or Chrome Threepio – whatever the 2nd prize winner didn’t choose.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.