About Jennifer

Jennifer Spencer received her very first LEGO set, 6419: Rolling Acres Ranch, at age six. But she found the instructions far too complicated and so she forced her father to build (and rebuild) the set for her. He must have grown weary of looking at that instruction booklet because Jennifer did not receive another LEGO set for several years. Jennifer builds her own sets now. She has been active in the online LEGO community since 2011 when she first discovered The Brothers Brick. She’s also a member of her local LEGO users group, NEOLug. You can check out her original LEGO creations on Flickr.

Posts by Jennifer

These LEGO bricks are ready to trick or treat

Even LEGO bricks like to dress up for Halloween. Well, that’s what Chris Maddison would have us believe anyway. His most recent build feature five characters that are simply adorable. I love how the ghost’s sheet is just a little too long, the zombie’s internal organs are exposed, and that the vampire’s collar on his cloak is perfectly popped.

Brick or Treat

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Darkness falls across the land – the midnight hour is close at hand

“Creatures crawl in search of blood, to terrorize Nick Sweetman‘s neighborhood. And whosoever shall be found without the soul for getting down must stand and face the hounds of hell and rot inside a corpse’s shell. The foulest stench is in the air. The funk of forty thousand years. And grizzly ghouls from every tomb are closing in to seal your doom. And though you fight to stay alive, your body starts to shiver. For no mere mortal can resist, the evil of the thriller…”

Thriller Night

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Builder mixes 70’s rock, spaceships, and LEGO

Let’s return to the 1970’s for a moment. Japan faces a serious economic crisis, President Nixon resigns from office, and rock-and-roll music has never been cooler. Back in present day, grobie built these sweet LEGO creations to honor two rock bands from the psychedelic “Me Decade.”

RBS project ELO

First up, we have Electric Light Orchestra (ELO)’s spaceship from their Out of the Blue album cover and an accompnaying Jeff Lynne minifig with acoustic guitar. You have to admit, that custom ELO paint job is downright groovy. Next up, we have Journey’s spaceship from their Escape album cover. This build also comes with a short-sleeved Neal Schon and the ship even has detachable scarab wings! Can you dig it? I can.

RBS project JOURNEY 3

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This is Halloween, everybody make a scene.

This Nightmare Before Christmas LEGO creation by Cesar Soares looks like it came straight out of Tim Burton’s head. Mimicking the opening of the movie, this vignette is done in mostly black and white and it packs a lot of detail into a seemingly simple design. It’s got Mjolnir cobblestones, an eerie lamppost, and even pumpkin heads impaled on the fence spikes!

Nightmare Before Christmas

But of course, the real stars of this build are the perfectly proportioned figures: Jack Skellington and the Mayor of Halloween Town (aka, the original good cop/bad cop). The Mayor even comes with his “Mayor-mobile.” The proportions on this hearse are spookily good. If you’ve seen the movie before you’ll remember the car’s Dr. Seuss-like loudspeaker and the black cat hood ornament (which lets out a yowl siren when you crank the tail).

Nightmare Before Christmas

Well, I think it is time to bust out my old VHS collection so I can watch this movie.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Another LEGO nod to the classic Star Wars toys of the 80’s

Remember when Eric Druon built a LEGO version of the 1980’s Kenner Death Star? Well, the French builder is recreating even more of your favorite Star Wars toys from the past! But this time instead of the Death Star we get Cloud City of Bespin. Just look at those play features! This beauty has everything you need to reenact your favorite scenes from Empire including the carbon freezing chamber and the strange catwalk where (spoiler alert) Vader cuts off Luke’s hand.

BESPIN WORLD

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Can I get both of these in a size 9, please?

Life-size LEGO creations are the best, especially when the subject matter is an everyday, mundane item. Like a shoe! These two pieces of LEGO footwear by Felix Jaensch are great! The red high-top Chuck certainly looks like the real deal at first glance and the black pump is sheer sexiness.

Converse Chuck Taylor All Star

Like a real Converse shoe, this LEGO one has those little breathable holes at the arch of the foot, a shiny white top cap, and it even looks a little collapsed in on itself thanks to a few expertly placed hinge pieces. Check out this other view to see how the front of the shoe is even a little wider than the rest.

And of course, in addition to your everyday kicks, you need a basic pair of high heels (for those nights out on the town). This shoe looks a bit uncomfortable, but I guess that is true of nearly any high heel, so I say, well done.

High Heel

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

This tiny LEGO ship is in dire straits

Things are not looking good for the crew of this doomed vessel. Gale winds and churning seas are posing a serious risk to this tiny ship built by LEGO 7. But worst of all, the ship is being attacked by a massive sea monster! This microscale pirate ship actually looks like it is sailing in the middle of a storm and the builder’s choice of colors and composition are great. It just goes to show you, a LEGO creation doesn’t need to span hundreds of studs to be magnificent.

Sea monster attack-1

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Wiggle your big toe

Who would have guessed that Beatrix “Black Mamba” Kiddo from the Kill Bill movies would look so good in LEGO? This build by Brandon Griffith is exceptional. Brandon used a great combination of studs and tiles to give Beatrix’s leather suit texture while maintaining a sleek overall shape. I love the little details like the sword dripping blood and the colorful logos on the Bride’s yellow motorcycle suit.

The Bride

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

When LEGO meets Lite Brite

This pixilated classic space logo by Jonathan Gale is one of the most impressive LEGO creations I have seen in a long time. If you look closely, you’ll see that his build is made up of thousands of LEGO lightsaber blades (5520 of them to be exact). There is an LED light behind the blades, giving the translucent pieces a glowing effect.

Lego Space Logo Tile Top

Jonathan said he was inspired to try this building technique after a LUG meeting where he realized that 25 LEGO lightsaber blades fit perfectly into a 2×2 stud square. This build took over 10 hours to complete and, according to the builder, came with a constant and serious risk of collapse. I can’t even imagine the amount of patience it took Jonathan to complete this beast.

Lego Classic Space Logo Closeup

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Life-size LEGO facehugger is a thing of nightmares

It looks like Paul Reiser (aka Carter Burke from Aliens) has been releasing facehuggers into the homes of innocent people again! No, this grainy photo isn’t a still from the next film in the Alien franchise, but it could be! Seriously, mordatre‘s LEGO facehugger is terrifyingly good. The sleek Bionicle pieces combine perfectly to create a realistic and dynamic alien exoskeleton. I love the posable tail and legs. But if this thing could move on its own, I don’t think I’d ever be able to sleep again.

facehugger01

Here’s a better (?) look at the nasty creature.

facehugger02

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

What is dead may never die | Greyjoy stronghold from Game of Thrones in LEGO

The Game of Thrones universe is full of amazing structures, including a ginormous wall of ice, pyramids, and even a castle half-melted by dragonfire. But my personal favorite has always been Pyke, an ancient castle built upon the cliffs of the Iron Islands of Westeros. Anu Pehrson‘s LEGO version of the Greyjoy stronghold is breathtaking. Anu, who won an award for this creation at BrickCon recently in Seattle, perfectly captured the rickety towers connected by rope bridges and the eroded, mossy cliff faces. There’s even salty brine covering the lower rocks!

Pyke Castle

The landscaping in this large LEGO creation are worth a closer look, with blocks of green breaking up the gray cliffs.

Pyke Castle

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Massive LEGO Harrower-class Dreadnought

It’s tough to build a good-looking ship using only one color. It’s tougher still to build one that stands up against the original source material. Swan Dutchman‘s Harrower-class Dreadnought from the Star Wars universe does both. At nearly two and a half feet long, this LEGO battleship took over 5700 bricks and 5 months to build. It’s got the perfect amount of greebly-goodness, tons of miniature firepower, and a sleek style worthy of the Old Republic Empire.

Harrower-class Dreadnought

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.