Tag Archives: Transformers

A-wing, transform and roll out!

Yeah, yeah, we’re featuring another Star Wars build. Or….are we? Builder Alan Yap has gone beyond the slew of Razor Crests and Baby Yodi (If that’s not the plural, it should be) by taking a RZ2 A-wing interceptor from Star Wars The Last Jedi and mashing it into the Transformers universe. This cool creation doesn’t require any rebuilding to switch between robot and vehicle modes, and it looks sweet as both.

In vehicle mode, Alan gives us the shape and styling we’d expect from any stock A-wing creation. There are great part choices, like the use of life rings in the engines, and the 1×1 round tile with a star decoration near the cockpit. there are no unusual seams or weird blockiness that would suggest there was more to this build than meets the eye.

The robot mode is equally impressive, with superb articulation that allows for great poses. I like that the head (made primarily from a tooth plate) has a classic Generation-1 feel to it.

For even more photos, and a discussion of the design decisions that were made, I suggest you check out Alan’s post about the build. It’s fascinating reading.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Go down memory lane with these amazing LEGO versions of classic Transformers

Alex “Orion Pax” Jones is a very focussed builder. All his LEGO building time lately has been spent on creating as-accurate-as-they-can-be digital Transformers Generation 1 characters. There’s so much to love about these as they instantly transport us back to a time when morning cartoons were not streamed and you had to wake up early to tune in to what now are amazing pop culture classics.

Click to see more Generation 1 Transformers

Retro Transformer goodness

I remember when the first wave of Transformers reached the US; these toys were an instant must-have for everyone I knew. (And woe betide anyone who got to Toys-R-Us a few minutes late and had to settle for the not-quite-as-cool “Go-Bots” toys.) Alex Jones (aka Orion Pax) has been transporting us to those good times with a selection of Generation 1 Transformers, and he’s back with another round of stellar creations. Each model is a combination of clever building techniques and detailing, with a bonus of great retro presentation.

This is not the first time we’ve seen an amazing LEGO version of Bumblebee from Alex. (Has it really been ten years?) This upgraded 2019 version makes use of a lot of parts that weren’t around in 2009. Bumblebee’s vehicle mode is clearly based on LEGO set 10252 Volkswagen Beetle. There are a few design tweaks, but the beetle’s shaping is instantly recognizable. The yellow recolor alone would be impressive enough, but the fact that it transforms as well? That’s just nutty levels of awesome.

Alex didn’t stop there, though. There’s a giant selection of transforming goodness!
Continue reading →

I scream, you scream, we all scream for Starscream!

The character attributes that I’ll always remember Starscream for are being whiny, always going around his boss’s plans, and frequently retreating when things go wrong. I guess those are also his best attributes that make him memorable after all these decades. What’s more interesting, however, is YouTuber Starscreamer’s creation of his namesake, the Transformers Generation 1 Decepticon Starscream. It’s created with an uncanny likeness, with the signature colors and parts that give it the perfect shaping.

Click to see the video for the transformation process

Build your own LEGO transforming microscope [Instructions]

Do you own a copy of Emmet’s Triple-Decker Couch Mech from The LEGO Movie 2? Would you like to take that set from a 2-in-1 build to a 5-in-1? Alan Yap has investigated the possibilities and discovered there is more to this set than meets the eye. By rearranging parts, you can make a microscope that transforms into both a hovertank AND a sweet, sweet robot. This is alternate building at its finest and, best of all, you can build it too thanks to Alan’s instructions!

There’s more to this model than meets the eye. Read on to find out why!

To stand divided, we will surely fall

The Super Deformed (SD) aesthetic, sometimes better known as Chibi designs, has a unique appeal when representing characters, emphasizing cuteness and innocence. I think it works well with LEGO as a medium, especially when filled with details. Though this pair may not transform into their vehicle forms, these two best buddies Optimus Prime and Bumblebee, are built by Choi Dam Baek (최담백).

Posed in their robot mode, not only do they look great, but they do have enough articulation to bring them to life in a wonderful example of the Chibi aesthetic applied to unusual characters.

This LEGO Volkswagen Beetle is a Bumblebee in disguise

For those of us who were in our early teens in the eighties, Michael Bay got it all wrong when he made his first Transformers movie. Listen to me, Mr. Bay: Bumblebee turns into a Volkswagen Beetle; not a Camaro. Travis Knight, the director of the new 2018 Bumblebee movie, was a teenager in the eighties and is a self-confessed Transformers fan. He nailed it.

We’ve already featured a really sweet LEGO version in Beetle mode by hachiroku24 and a screen-accurate Bumblebee robot by ekownimako. However, they don’t actually transform. I happen to think that this a pretty essential feature of any Transformer.

Making it transform is certainly not easy, but I pored over pictures of new Bumblebee toys released for the movie. I also happen to have a LEGO Beetle design that I like, which I could use as a starting point. It is quite small, though, at about 19 cm long (roughly 7 inches) and there is a lot of stuff that needs to fold into it. The end result is flimsy, it doesn’t really want to stand upright unsupported and it’s not nearly as nicely proportioned in robot mode as in the movie, but it works: the Beetle unfolds into a Bumblebee.

LEGO Bumblebee in beetle form is one sweet ride [Instructions]

The new, much-anticipated Bumblebee movie has inspired LEGO fans to build some fantastic creations recently, from this large-scale figure by Ekow Nimako to this transforming model by Jerry Builds Bricks and this cute model in Volkswagen Beetle form by hachiroku24 is the latest. One of my favorite details is the gently curving back of the car, which very closely matches its real-life inspiration. The extra curvy front wheel well is also a very nice detail and helps to complete this iconic car profile.

Click through to see the parts list and instructions to build your own LEGO Bumblebee

LEGO Bumblebee buzzes his way into your heart

There have been many Transformers movies released over the last decade, and many LEGO Transformers have been featured here at TBB, some that actually transform, and some that are so detailed they boggle the mind. With the upcoming release of Bumblebee, this highly detailed model by ekownimako closely resembles its on-screen inspiration. From the gently curving eyebrows fashioned from the flexible stretcher harness to the handlebar parts that form the separated front fender.

Check out some of the many other Transformers LEGO creations we have featured recently.

Bumblebee bot is a tasty Transformer

We’ve seen our fair share of LEGO Transformers models (notably the collection of brick-built robots by Alex Jones and Joachim Klang). But here’s a smart little version of Bumblebee in his Camaro iteration by Jerry Builds Bricks. The model is a neat design — not only does the car look sleek and smooth, it transforms into the robot without the addition of any more parts. I particularly like the use of the textured Technic part for Bumblebee’s face — it adds a level of detail beyond what you might expect at this scale.

There’s a thin line between being a hero and being a memory

Optimus Prime is someone full of wise words of leadership, and he dishes them out frequently to his team of Autobots. It’s something that I’ve always liked about him besides his general cool factor. This excellent build of the Generation 1 series by Marco De Bon triggers some of those memories. I like how the ingot bars are used to create a very mechanical feeling at just the rights spots in the build.

Constructicons come alive to form Devastator in LEGO

I’ve likely transformed these infamous Constructicons back and forth from vehicle to robot forms and into their larger combination of Devastator a million times back in the 80’s. Builder Alex Jones did an amazing job recreating these into their LEGO equivalents. What brings all the nostalgia back are their accurate color schemes of lime green and purple and the amazing resemblance of the individual construction-related vehicles. While it’s granted they’ll never be quite perfect at transforming due to the limitations of LEGO bricks, I’d say this is one very admirable attempt. Alex says that it was an on-and-off work in progress for the past 3 years, and it’s definitely worth the time and patience put into it.

Click here to take a closer look at each of the individual Decepticon…

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!

Like this article? Tell all your friends!