Tag Archives: Star Wars

LEGO Star Wars is one of the most popular LEGO themes of all time. Far beyond X-wings and TIE fighters, there’s a whole expanded universe of inspiration, and an army of LEGO fans ready to build whatever comes out of George Lucas’s head next.

Creature comforts of desert living

For a planet best known for its hives of scum and villainy and unforgiving climate, Tatooine boasts a remarkable variety of large animal life, from humble Womp Rats (not much bigger than two meters), to enormous and deadly Krayt Dragons. Builder Maximillian Bricks has recreated several of Tatooine’s charismatic megafauna in LEGO and the results are adorable. For instance, this pair of mounts from Disney Plus outings shows Obi-Wan and his Eopie, plus Boba Fett riding a Bantha as an honorary Sandperson. Flatulence and blue milk, not included.

Tatooine creatures

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

X-treme makeover, X-wing edition

Over 25 years of LEGO Star Wars, we’ve seen at least 10 different Tie Fighter variants but the beloved X-wing has only ever come in two flavors: your classic T-65, or the modestly upgraded Resistance era T-70. True, the “good guys” have a veritable alphabet of other craft, but surely the flagship fighter deserved a bit more variety? Builder Don Wilson imagines a New Republic-era fighter that takes a bolder approach to upgrading the X-wing design. Based on a fan design from Corellian Customs, the “Thumper” Heavy Artillery X-wing trades curves for sharper angles and muscle car power.

'Thumper' Heavy Artillery X-Wing

Click to lock S-Foils in closed position and see more of this sleek fighter!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Should any of ye be wishin’ ta beg for mercy, Captain Hutt will hear yer pleas

Any fan of pirate history knows the legend of the Jade Eye’s Return, and how young Duke Wavewalker and his ragtag crew fell into the hands of the nefarious Captain Hutt while fleeing the Imperial armada. Joe (jnj_bricks) pays tribute in LEGO to the memorable scene on the shoals of Cancun where Duke and crew were taken by skiff to the all-meaty shark pit. Joe’s clever mash-up was made for a challenge to blend Star Wars with history, so taking the plank-walking Sarclaac scene back to the golden age of pirates is a perfect fit. The skiff’s brick-built hull is a lovely design and Joe’s technique for partially submerged sharks is brilliant, nesting the upper jaw over a grey dome and using triangular tiles for the dorsal fins. What sells the scene is the excellent remix of minifigs. Of course, pirate Chewie would use Hagrid’s beard.

The Shark Pit

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Cruisin’ for a bruisin

TBB alum Mansur Soeleman is back with a heavy-duty LEGO cruiser that can dish it out with the best of them! Using only one technic plate, a slope, and two plates with bars, Mansur has built a gun turret that he’s peppered across the ship. I count seven visible, can you find more? Be sureake in all of the fascinating greebling between the armor panels on ship. And speaking of armor, gander at the tiny rounded indent just below the command deck, to the right of that turret. Mansur has added some extra texture using a pair of finger hinge pieces from yesteryear, likely to reverse the stud direction in the span of a plate. But, the star of the armor show is the 8x1x3 slope. Mansur has used six of them just on this half of the ship to create the angular and geometric paneling. With all of that done, all that’s left to say is “punch it”!

HSY Vausi-class Cruiser

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Lock your banshee in attack position, we’re going in!

Can’t pick just one big-budget sci-fi franchise in which plucky insurgents strike back against an evil from the stars? Now you don’t have to. Moptoptrev‘s “Neytiri’s First Space Flight” blends the aerial rides of choice from both Avatar and Star Wars in vivid color. The LEGO creation is part machine, part creature, and all deadly. Even without the Avatar additions, the color scheme makes for a visually stunning X-wing, but the banshee parts take it to a whole new level. The craft’s signature S-foils have been replaced by banshee wings, and the laser cannons are now banshee heads. The largest head forms the nose of the living starfighter. I don’t know how all those heads work together, but one thing’s for sure: if you’re a bad guy, this is one thing you don’t want to see in your rearview mirror.

Neytiri's First Space Flight: StarWars X Avatar

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Mega Star Wars MTT makes me marvel!

Originally introduced in the Phantom Menace, the Multi-Troop Transport (MTT) has seen several LEGO iterations in official Star Wars sets. But none of them have shown the vehicle in the blue-and-grey CIS livery seen in the Clone Wars animated series. The Minikit Guy has also previously built an MTT in Trade Federation brown – but they have updated it to its Separatist colours! And what a model it is, made up of either 10,000 or 11,000 pieces. Hang on – 10 or 11 thousand? Why the difference?

UCS Clone Wars MTT - Confederacy of Independent Systems / CIS Version

You’ll have to click through the link to find out!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

LEGO Star Wars, Dungeons & Dragons, Super Mario & more among LEGO sets revealed at San Diego Comic Con 2024 [News]

San Diego Comic Con (SDCC) has become a favourite place of LEGO’s to reveal new sets, and we’ve been treated to five all-new reveals over the first day of the convention (as well as a first look at the previously-announced 41838 Travel Moments). The pool of characters for your Dungeons & Dragons adventures is increased from September 1st thanks to a Collectible Minifigure Series, 71047 LEGO Minifigures – Dungeons & Dragons. No doubt these will pair nicely with 21348 Red Dragon’s Tale, and you can pre-order them now for US $4.99 | CAN $5.99 | UK £3.49. Another noteworthy minifigure makes a comeback in a Star Wars set, too: 75388 Jedi Bob’s Starfighter turns LEGO folklore into a tie-in with the upcoming Rebuild the Galaxy mini-series. That one releases in just a few days on August 1st, retailing for US $39.99 | CAN $49.99 | UK £34.99.

Sets from Super Mario, Minecraft and Sonic the Hedgehog themes have also been unveiled for release in October this year. Pictures of those – and more of the above – after the jump!

Continue reading

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Behold, the Ancient Navigators!

TBB alum Mansur Soeleman transports us to a faraway galaxy with this intriguing, visually striking LEGO depiction of the inner sanctum of a cadre of alien shipbuilders. The Star Wars Factions RPG provides inspiration for the scene, but the otherworldly costumes and architecture evoke a sense of mystery that would feel at home in any far-flung space opera. Each of the “Ancient Shipwrights” wears a distinct outfit that wouldn’t feel out of place in the Dune universe, though you can spot a Guavian Death Gang mask from The Force Awakens in the leader’s elaborate headdress. Beyond the figures, the antistud floor (regular plates turned upside down) adds an interesting texture to the scene. And while the holo hovering above their heads obviously isn’t LEGO, it certainly adds to the effect. (To get the full experience, see the scene animated here.)

The Ancient Shipwrights - The founder of Haelos Star Yards, a shipbuilding corporation

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

A Star Wars palace fit for an evil emperor

The Emperor’s personal residence hasn’t appeared in any of the films (well, unless you count its prior incarnation as the Jedi Temple, according to current canon), but it still looms large in Star Wars lore. A little forced perspective helps it loom even larger in this great LEGO diorama by r_t_zan, where its appearance is inspired by its classic Legends description. The build concentrates its minifig-scale details up front and lets the eye drift toward the rear, where its forbidding spires reach for the stars. Other than a statue, we never see the Emperor himself, and the build is all the better for it—Palpatine’s air of mystery is preserved as we imagine which of those lofty spires might house his evil presence.

Imperial Palace Coruscant, Lego Star Wars Moc

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Can’t find a good LEGO connection? Just add more!

I get a real kick out of seeing parts from the old Star Wars Planets line used in LEGO creations. I’m not sure why that is – perhaps it’s the round features juxtaposed with the often angular lines of other bricks, or the challenge of having only two connection points. Well, I say only two… Nuhvok_mok has come up with an inventive way to add more! In this somewhat sinister droid, the Death Star is used for the top portion, with the photoreceptors attached to it using LEGO magnets. Ingenious! Appropriately enough, the whole things reminds me of the Death Star interrogation droids from Star Wars: A New Hope. I wonder if there’s a tiny interrogation droid floating around in there…

Codsworth

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

“All I am surrounded by is fear... And LEGO bricks”

Evil though he is, Darth Vader is a bit of a badass. That’s sort of evident from the films, but it’s laid out in full, merciless glory in the Darth Vader: Imperial Machine comic series. Flickr builder h2brick is paying tribute to this run of comics in the best way they know — with some fab LEGO vignettes! We’ve got three to look at so far — there will be nine in total, which we’ll surely come back to. Might as well start at the beginning, right? In this one, half a Technic click hinge is used as the medical seat/bed legs, to great effect.

The Machine (1/9)

Have a look at numbers two and three after the jump!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Rebellions are built in teal

How can a scrappy Rebellion possibly stand up against an Empire with massive fleets of grey, dark grey, sometimes black, but mostly grey ships? By using the one thing the Empire, in all of their power, could never imagine bringing to battle: teal. Teal, the color of hope, beloved by LEGO fans across the galaxy (except of course for designer Mark Stafford)! A band of rebels in the LEGO community have been slowly expanding on the Teal Squadron theme, and the latest addition is this brilliantly-shaped Teal Tower from Tim Goddard. As Tim explains, Rebels often repurpose existing buildings for their bases, and this tower’s weathered exterior certainly suggests a long history, with just small details to let the crafty Rebels lie low. Dark orange weathering looks great amongst the white masonry, and perfectly contrasts with the vital teal. The greebling (or sci-fi texturing) along the sides, rooftop antennae, and the decidedly low-tech awning perfectly capture the Star Wars aesthetic. And Tim’s teal-accented droidekas are maybe the best minifig scale versions of the droids I’ve seen.

Teal tower

For more teal-infused Star Wars creations, Mansur Soeleman’s Cerulean Phoenix, Alec Hole’s Capital E-Wing, Inthert’s Teal-4 Skylark, and Wami Delthorn’s Cobalt Thorn.

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.