Tag Archives: Star Wars

LEGO Star Wars is one of the most popular LEGO themes of all time. Far beyond X-wings and TIE fighters, there’s a whole expanded universe of inspiration, and an army of LEGO fans ready to build whatever comes out of George Lucas’s head next.

That’s no twin suns...

Ah, Tatooine. A wretched hive of scum and villainy and being the centre of the galaxy. Honestly, everything Star Wars seems to take place at this dangerous ripoff of Arrakis from Dune. However, somehow it works. What amuses me is that amongst all the bounty hunters and intergalactic crime cartels, the biggest dangers for two droids is freaking Jawas. Short, hooded, chattery notorious salesmen traveling in a massive brown tank. And this small build by Kosmas Santosak conveys this so well.

There’s just something about the image of a hooded Jawa looming over a stranded C-3PO and R2-D2 that makes me laugh. Perhaps it’s the glowing yellow eyes that’s a parallel to Tatooine’s twin suns that is clever and funny. Or perhaps looking at it I can hear the high-pitched babble of those mischievous scavengers…

Utinni!
Shootogawa!
A beton nya mombay m’bwa!
Nekkel juuvar obwegadada!

The Brothers Brick is funded by our readers and the community. Articles may include affiliate links, and when you purchase products from those links, TBB may earn a commission that helps support the site.

Fabulous Fabuland Homestead

No Fabulous Fabulandspeeder is complete without a Fabulous Homestead. So we are very grateful that Stewart Cromar continued to fabulize Star Wars sets. Whenever you buy a LEGO Star Wars set and you open up all the bags and spread out all the parts on the table you’ll notice that a lot of the parts are light grey, dark grey, or black. Then there are some pops of colour but those are mostly used in the construction of the vehicle and later covered up with light grey, dark grey, or black bricks. Completely the opposite of the Fabuland theme and therefore it is ever so delightful to see these sets get the Fabuland treatment. Some of the original Fabuland parts work so perfectly that LEGO might have to consider recoloring those parts to light grey, dark grey, or black for future releases of Star Wars sets. For instance the mailbox top works perfectly as an arched rooftop and the refrigerator door looks stunning as a front door to this lovely Tatooine Homestead. So LEGO, please consider bringing back some of those iconic Fabuland pieces.

Got weird grody space-milk?

I’m no slouch when it comes to writing my own jokes. But sometimes you just want to seek out low-hanging fruit and let someone else do all the heavy lifting and joke writing for you. Thankfully, I found The Brothers Brick alumni Iain Heath to be both low-hanging and fruit. The Last Jedi answered a dubious question that no one wanted to know; how does Luke sustain himself on the remote, rocky, wind-blown planet of southern Ireland? It turns out he gets it right from the tap as illustrated with this creation that Iain made to look like an official LEGO set. (Don’t let that fool you, space travelers!) It features a Thala-siren, a weird marine mammal-creature with her huge rediculous udders flopping out there in front of God and everybody to see.

The title “Crazy Space Wizard Breakfast Assault” is hilarious. The milk on Luke’s face, Rey’s last name are all also pretty damned hilarious. Even the piece count of 420 may offer up a clue as to where Iain gets all his crazy ideas. See what I mean? The jokes just write themselves!

At last we will reveal ourselves to the LEGO fans...

You’ve got to give Yodamann credit for keeping LEGO building fun with this build that could have been part of the Time Cruisers line in the ’90s. Classic pirates with a Star Wars-inspired speeder…what’s not to love? The oars in the front, the inspiration for this creation, works really well here, and I love the barrel in the back for the propulsor unit.

An old bomber, a new paint job

There are few other fictional space ships that are as easily identifiable as the BTL-B Y-wing, seen here during the Clone Wars. LEGO builder simon-wild showcases his new take on one of the most classic starfighters to be seen on the screen.

Covered in armor and loaded with freedom, the mighty Y-wing was a staple of the Republic Navy during the Clone Wars era. It was retired during the Republic’s transition into the Galactic Empire but regained its status as a formidable bomber for the Rebellion, eventually earning the title, “The starfighter that broke the Empire’s back.”

In his build, Simon elaborates on the 8037 Anakin’s Y-wing Starfighter set released way back in 2009. He smoothed out the fuselage and engines, improved the paint pattern and traded the yellow for red. He also beefed up the size of the bomber to minifigure-scale, nearly reaching the size of the 75181 UCS Y-wing released in 2018. I admire all of the extra armor plating seen in Simon’s model. It helps separate the Y-wing from looking like a fighter and more like a bomber. Perhaps we’ll see an armor-less version of Simon’s Y-wing fighting for the Rebellion in the future?

A new way for the Rebel Alliance to get around.

It’s a small part of the movie, but my favorite piece of technology introduced in 1999’s The Phantom Menace is the Bloodfin, Darth Maul’s almost orb-shaped speeder bike that is glimpsed briefly on Tatooine. My infatuation with the vehicle might be that it belonged to Darth Maul, who was the coolest part of that movie overall. Or it might just be that I love speeder bikes in all their forms. Whatever the reason, I was delighted to see this Rebel speeder bike by Patrick Boyle that makes use of a similar shape.

The new bowed window element helps give this vehicle its distinctive curves. And, by building the speeder in a typical Rebel color scheme and outfitting it with a place to keep an Astromech droid, Patrick has crafted a vehicle that blends the new and the familiar – a must when creating original Star Wars tech in LEGO form.

Imperial by birth, Rebel by choice

Did you know that the Rebel Alliance’s Medical Frigate began its life in the service of the Empire? LEGO builder Remco Rohaan shares his latest masterpiece, the Imperial Nebulon-B Frigate.

It’s an established fact in the Star Wars lore that the Nebulon-B Frigate, first seen at the end of The Empire Strikes Back, was a ship built by the Empire but stolen by the Rebellion. Yet we’ve never seen the Nebulon-B during its time as an Imperial warship. Thanks to fan art creators like EC Henry and Fractal Sponge, we’ve been able to get a glimpse of what the Nebulon-B must have looked like before it fell into the hands of “Rebel scum.” Now, we have the privilege of seeing the ship in LEGO form.

Clearly, this looks like an Imperial warship. The armor plating, command bridge, and TIE fighter-style wings give off really strong Empire vibes. Speaking of armor plating, I just love how much there is. The Rebel version of the Nebulon-B has a considerable amount of armor removed, which is typical of Rebel spacecraft.

Builder Remco Rohaan also included digital instructions of his Imperial Nebulon-B on his Flickr page but also check out this quick video of it being assembled

https://www.flickr.com/photos/remcorohaan/51408124868/

Here’s an image of his Imperial Nebulon-B to scale with the Rebel version, an Imperial Gozanti freighter, and an Imperial shuttle.

Those scrappy Rebels

The Rebels in Episode IV of Star Wars were really a rag-tag bunch of freedom fighters, and their equipment was largely hand-me-down dilapidated old tech. LEGO builder Abe Fortier is showing us a side that we don’t often see though, of the Rebels scrapping out a ship that’s no longer spaceworthy. Abe pulled the Y-wing design from Star Wars ship-master Jerac, but gave it a cool twist with disassembled sections and of course, a portion of the Massassi outpost on Yavin 4 that the Rebels turned into a base.

This may smell bad, kid...but it’ll keep you warm...

The tenacious smuggler turned burgeoning rebel general, Han Solo, really saved the galaxy by cutting open that poor Tauntaun. Thankfully, his quick thinking made good use of the dead creature’s lingering heat. Before you start wondering if that residual heat would really keep Luke alive through a night on Hoth, just remember that Han says he’s putting up a shelter. The real tragedy is that Han knew he’d be sacrificing that, er, magnificent creature when he left Echo base. He was warned! Still, I’m sure Luke was grateful, both for being saved and for being unconscious during his nap in a Tauntaun carcass. Mostly. Anyway, this playful Miniland-scale Star Wars model by Ochre Jelly hits me right in the nostalgia.

The Miniland building style allows for playful details in brick-built figures. Ochre Jelly is fond of this style and has built some iconic scenes and memes in the past. Here he’s done a wonderful job with the Hoth versions of Han Solo and Luke Skywalker from the beginning of The Empire Strikes Back. Their respective outfits translate well to bricks and plates with proper color blocking. Han’s fuzzy hood achieved with exposed studs is pretty neat and his stance captures his mood perfectly.

The scale of the figures definitely allowed for more detail and curves in the Tauntaun. Big, thick legs and distinctive claws, along with a saddle and amazing horns, match well with the source material. Those Minifigure arms used as guts are a real clincher, though. A mess of blue clips and plates seem like blood pooling under the multi-colored assortment of Minifigure body parts with hotdogs thrown in for good measure. Delusional Luke probably appreciates that warm goo a little bit, right?

I’m just glad that the LEGO Group hasn’t made scented bricks because we do not need to know the actual difference between the outside and inside smells of a Tauntaun.

This Clone Wars model is blasting off

This cleverly constructed build is a collaboration between Hp Bricks, who designed the head, and Glenn Tanner, who built the rest. The model shows the helmet and part of the torso of Gar Saxon, from the Clone Wars tv series. The aggressive style of the armour has been captured through the use of angled pieces which creates sharp and protruding details. The explosive fire from the jetpack provides the model with a unique aesthetic as normally body busts can be quite static. It’s probably not the focus of the build but there are ice cream parts in grey at the stand of the build representing smoke clouds from the jetpack. We don’t often see a head and torso sculpt like this in action, so this model is a welcome treat.

Lando’s Treadable from Star Wars: The Rise of Skywalker at LEGO UCS scale

While Star Wars may be known best for epic spacecraft like the Star Destroyer and the Millenium Falcon, there have been more than a few vehicles of a more humble design, like the Sandcrawler. The new sequel trilogy had perhaps more new ships than previous movies, but Jürgen Wittner, has set his sights on one of the most interesting new vehicles, the Treadable, the tank of a mobile home owned by Lando Calrissian.

Check out more photos of this most unusual vehicle

Imperial Soviet Nuclear TIE Bomber

Yes, you read that right. And your eyes are not deceiving you. LEGO builder Ghalad managed to combine an obscure nuclear seaplane from the Soviet Union with a classic Star Wars TIE fighter. The resulting digital build is something you could have expected to appear in the sequel trilogy of Star Wars films.

It’s unlikely you’ve heard of the Lun-class Ekranoplan, a Soviet-era seaplane capable of launching nuclear warheads through tubes based on top of the plane. It was developed before the age of ballistic submarines, filling the gap between land-based nuclear bombers and sea-based launch platforms.

From Wikipedia

Click to see more pictures