There are few cars more iconic than the Ford Mustang, which surpassed 10 million sold last year. So it’s fitting that the LEGO Creator Expert theme’s next automobile replica represents this piece of muscle car history. After taking us back 50 years to the world of spies and intrigue with the James Bond Aston Martin DB5 last August, LEGO is remaining in the 1960s with a striking blue-and-white version of the original pony car. Although LEGO coyly dodges addressing the specific year of the car (consistently referring to it as simply a 1960s model) the license plate and styling indicate that it’s primarily based on the GT Fastback from the 1967 model year. Available beginning March 1, 10265 Ford Mustang has 1,471 pieces and retails for $149.99 USD | $199.99 CAD | £119.99 GBP. 
The box & contents
Tying with the Aston Martin DB5 for most-expensive Creator Expert vehicle, the Ford Mustang is a big set in a big box. Although the part count is more than 200 higher than the DB5, when laying out the eleven bags (spread across only six numbered steps) the set’s parts don’t initially seem to live up to the price tag. However, once I began building, the very slowly dwindling pile of parts made me reconsider. And by the time I’d finished the model hours later, I felt the price was entirely justified.
The instructions and stickers are packed together in a protective bag, following the laudable trend of large sets in recent years. The instructions open with eight pages of information about both the set and the real automobile. The brief history of the car is a bit scattered, including such details as how the logo was developed and that 19 shades of blue were offered between 1967 and 1973, but it’s all neat information that Mustang enthusiasts and casual readers alike will enjoy. The LEGO-focused spread introduces fan-turned-designer Mike Psiaki as the primary design lead for the model. Mike’s been busy with the Creator Expert line, having also designed 10262 Aston Martin DB5 and 10252 Volkswagen Beetle, along with 10260 Downtown Diner and 10257 Carousel.
The small sticker sheet primarily includes alternate license plates, although there are a handful of decorative touches as well, such as the air filter, rear-view mirror, and tail emblem. Many of the Creator Expert cars include alternate license plates for a variety of countries, and that’s continued here with registration tags for Michigan and California USA, Denmark, New South Wales Australia, and Germany. The Michigan plates’ meaning is obvious, and it’s a safe bet that the California plates are a rendering of Mike’s last name. Meanwhile, the instructions note that the German plate numbers once belonged to fellow-designer Adam Grabowski, who helped prototype the Mustang. But I’ll have to solicit guesses on the Danish and Australian plate meanings.
Despite the fact that the set includes 18 stickers, they’re actually outnumbered by the unique printed elements in the set, of which there are a whopping 28. Nearly all are used for the Mustang’s blue-and-white stripes. I’ve also included in the picture the 1×1 round tiles printed with the galloping Mustang emblem, although that part has previously appeared in the Speed Champions Mustang (only one is used in this set — the other is extra).
The build
As with many sets in recent years, the frame starts off with Technic box beams strung together. The build quickly moves to cover this with a layer of plates that form the floor. Already, though, readers who have built any of the previous Creator Expert vehicles will notice one major difference near the front: there’s a steering mechanism. And it’s an odd one, too, relying on a large 40-tooth gear embedded deep in the engine bay to translate the gear ratio from the steering column to the tie rods.
Amazingly, this huge gear is entirely invisible in the engine bay on the finished model.
You may also notice something interesting going on with gears at the back of the car. A worm gear is connected to a small 8-tooth gear on the rear axle, which combined with rotating lift arms, will allow the car’s rear suspension to be raised or lowered significantly.
Moving to the car’s back now, large flags line the interior of the wheel wells. It’s a brilliant solution to placing a wall where a standard LEGO brick would be too wide.
As the build progressed, I noticed that these two white columns beneath the front bumper looked more and more out of place. Even I know that most Mustangs don’t have those. In fact, they are supports for constructing the front fascia, and the instructions call for them to be removed right before putting the tires on. They are then handily recycled into the nitrous oxide tank (that’s right, this car conceals some dark secrets).
The completed model
The Mustang is an icon of automotive design, with clean lines in all the right places and a simple elegance that defined the 60s muscle car aesthetic. The LEGO model has done it justice, capturing the nuances as closely as is possible within the scope of plastic bricks at roughly 1/13 scale. No matter the angle from which you view this car, you’ll instantly recognize it as Detroit’s first pony car.
The double white stripes splaying lengthwise down the car are accomplished with three white bricks, with the middle having a dark blue stripe printed on, delineating the stripes from one another. It’s a simple way to do the narrow center stripe on a vehicle that’s an even width of studs, although in some places the alignment of the printing could use some refinement (note the slightly jagged line on the hood).
In addition to the opening doors, the roof pops off to aid with interior access. When attached, it connects to four studs at the back, so it’s not likely to fall off accidentally.
The interior is appropriately sparse for a car from an era when neither a radio nor air conditioning were a given. The dashboard features the two large dials — a speedometer and a tachometer on the real car — but lacks the smaller displays in the instrument cluster. Down the center is a radio courtesy of a sticker and the distinctive T shifter. Up above is the rearview mirror, which shows the silhouette of a vehicle that looks suspiciously like a Chevelle left in the dust.
Had enough of the mild-mannered road car, though? It’s time to upgrade and customize, because there’s plenty of extra bits and bobs included. Besides the adjustable suspension, you’ll get a front splitter, shorty exhaust headers, a supercharger, a nitrous oxide tank, a rear spoiler, and enough license plates to let you commit crimes in at least five districts.
The dial provides a hefty lift, raising the rear of the car about a half inch in real terms, which equates to about 6 inches at scale.
Conclusion & recommendation
I won’t beat around the bush: I think this is the best Creator Expert vehicle yet. Unlike the Aston Martin which struggled to transmit its subtle curves into the brick (though an admirable attempt was made), the muscle car’s lines translate very well into the palette of bricks and slopes.
10265 Ford Mustang is available March 1 from the LEGO Shop Online ($149.99 USD | $199.99 CAD | £119.99 GBP) as well as from third parties on Amazon, Bricklink, and eBay.
The LEGO Group sent The Brothers Brick an early copy of this set for review. Providing TBB with products for review guarantees neither coverage nor positive reviews.
